http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김경황,조균택,종윤석,이원범 한국표면공학회 2010 한국표면공학회 학술발표회 초록집 Vol.2010 No.5
본 연구에서는 0.1%C~0.8%C 탄소강에 대해 쇼트피닝에 의한 표면경화를 관찰하였다. 모든 소재는 쇼트피닝에 의해 표면부 결정립이 층상구조로 변하였으며, 처리시간의 증가와 함께 경도의 상승이 발생하였다. 또한, 경도의 증가폭은 탄소량이 많을수록 큰 것을 확인하였다. TEM 분석결과 표면의 결정립은 약 20~30㎚로 미세화되었으며, 결정립 주변에는 고밀도의 전위가 엉켜있었다. 한편 쇼트피닝 후에 표면에는 cementite의 완전분해가 일어났음을 확인하였다. 즉, 높은 탄소량을 가진 탄소강의 표면경화는 결정립 미세화 및 이에 수반하는 cementite의 분해에 의해 과포하된 탄소농도에 의해 증가되었음을 알 수 있었다.
쇼트피닝에 의한 Al-Si 합금의 표면 개질에 Si함량이 미치는 영향에 관한 연구
조균택,김경황,종윤석,이원범,김형순 한국표면공학회 2010 한국표면공학회 학술발표회 초록집 Vol.2010 No.5
주조용 소재인 Al-Si 합금에 쇼트피닝 처리를 하여 표면물성 변화에 대한 연구를 진행하였다. 6%, 12%, 18%의 Si 함량을 가진 상용 소재인 A356, A336, A390소재를 이용하여 동일 조건의 쇼트피닝 공정이 적용되었다. 그 결과 동일 조건의 쇼트피닝 공정 조건을 적용하였을 시 Si 함량이 증가함에 따라 더욱 향상된 기계적 성질을 확인 할 수 있었다. 이는 심한 소성변형에 의해 미세화된 Si particle 및 Al모재의 결정립 미세화에 의한 기계적 성질의 변화라 사료된다.
이원범(W. B. Lee),김경황(K. K. Kim),조균택(J. T. Joe),임경묵(K. M. Lim) 한국소성가공학회 2010 한국소성가공학회 학술대회 논문집 Vol.2010 No.10
This study investigates the effect of cementite phase on surface hardening of carbon steels when the materials are shot-peened with balls with 250㎛ in diameter. Three carbon steels; 0.1%C(AISI1010), 0.45%C (AISI1045) carbon steel and 0.8%(eutectoid carbon steel) was used in this study. Results reveal that increment rate of surface hardness is dependent on carbon content. Grain at the surface transformed into grains with lamellar structure and highly dense dislocations are entangled at the neighboring grains. In case of eutectoid carbon steel, grain size at surface is refined up to 20~30㎚. Owing to severe plastic deformation at the surface of carbon steels, ferrite grain size is refined and spheroidization of cementite is observed. We can deduce that a primary reason for significant surface hardening of carbon steels might be attributed to surface grain size refinement and ferrite solution increase of carbon following cementite dissolution.