http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
도트 패턴 데이터 베이스를 이용한 모델 기반 칼라 영상 중간조 알고리즘
김경만,송근원,민각,김정엽,하영호,Kim, Kyeong-Man,Song, Kun-Woen,Min, Gak,Kim, Jeong-Yeop,Ha, Yeong-Ho 대한전자공학회 2001 電子工學會論文誌-SP (Signal processing) Vol.38 No.2
본 논문에서는 칼라 영상의 프린팅을 위하여 도트 패턴 데이터 베이스를 이용하는 모델 기반 칼라 영상 중간조 알고리즘을 제안한다. 제안된 알고리즘에서 사용된 도트 패턴 데이터 베이스는 블루 노이즈 마스크에 기반하여 칼라 영상을 이루는 RGB 세 도메인의 칼라 값에 따른 원형 도트 중첩 모델을 이용하여 생성된다. 중간조 처리 과정에서는 입력되는 RGB 칼라 값을 재현하기 위하여 입력 칼라 값과 만들어진 도트 패턴 데이터 베이스의 칼라 값을 비교하여 최소가 되는 패턴을 그 칼라 값의 중간조 패턴으로 선택하는데, 이 선택과정에서는 인간 시각의 대조 민감도 함수를 적용함으로써 원영상에 대한 사람의 인식도와 출력을 위해 선택하려는 도트 패턴에 대한 사람의 인식도를 비교하여 좋은 화질의 영상을 출력할 수 있게 한다. 실험에서는 칼라 패치를 만들어 모니터와 프린터데서 출력한 후 칼라 스펙트럼 측정기를 이용하여 측정한 후 칼라 오차인 ΔΕ/Sub ab/를 비교함으로써 본 논문에서 제안한 방법에 의한 결과가 기존의 방법들보다 더 정확히 입력된 칼라를 재현할 수 있음을 보인다. Model-based color image halftoning method using dot-pattern database is proposed for low-resolution color image printing. Dot-pattern database used in the proposed method is based on Blue-Noise Mask. The database consists of dot-patterns constructed by circular dot-overlap model according to each color value. In halftoning procedure, input color value is reproduced as the dot-pattern selected to minimize the difference between the color values of the original image and those of the printed image. Also, the contrast sensitivity function as a human visual model is used to improve the perceived quality of the printed image in dot-pattern selection. Thus, the proposed method can substantially reproduce the color values of the pixels in original image and obtain better image quality. In the experiment, the proposed method has less ΔΕ/Sub ab/ between the original image in monitor and the printed one than that of ED and BNM halftoning. This result approves that the proposed method reproduces better image quality.
산성광산배수 처리를 위한 기질물질로서 막걸리 슬러지 평가
김경만,백환조,김대훈 한국자원공학회 2012 한국자원공학회지 Vol.49 No.1
The spent mushroom compost(SMC) has been generally used as substrate for passive treatment systems,especially for SAPS in Korea. More effective substitutes to replace the SMC have always been a major concern in this area. In this study, rice wine waste(RWW) was tested as substrates for use in acid mine drainage treatment. Batch tests were conducted to evaluate the material’s efficiency in reducing sulfates and removing heavy metals within the artificial AMD. Test results showed that both SMC and RWW have similar efficiency in total sulfate reduction capacity. However, the RWW has a little higher reducing rate, and the mixture of SMC and RWW showed the highest reducing rate. In terms of the heavy metal removal, including Fe, Al, and Cu, both materials showed similar results. Overall, the batch test results indicated that RWW has a good potential as a substrate for SAPS. 국내 자연정화 시설, 특히 알카리생성조는 주로 버섯퇴비를 기질물질로 사용하고 있으나 이를 대체할 수 있는 기질물질의 확보가 필요한 실정이다. 본 연구에서는 산성광산배수 처리를 위한 기질물질로서 막걸리 슬러지의 가능성을 평가하였다. 27일간의 batch test를 통해 버섯퇴비와 막걸리 슬러지의 정화 효율, 즉 황산염 및 중금속의 제거효과를 비교하였다. 두 기질물질 모두 총 제거된 황산염의 양은 비슷했으나, 황산염 환원 속도는 막걸리 슬러지가 조금 더 높은 것으로 나타났다. 또한 두 물질을 혼합한 경우, 총 환원량과 환원속도에서 가장 좋은 효과를 나타냈다. 두 기질물질 모두 높은 Fe, Al Cu의 제거 효율을 보였다. Batch test 결과를 종합해 볼 때, 막걸리 슬러지가 알카리생성조의 기질물질로서의 활용 가능성이 확인하였다.
(Bi,Nd)(Fe,Ti)O<sub>3</sub> 세라믹스와 박막의 상형성 거동
김경만,이희영,Kim, Kyung-Man,Lee, Hee-Young 한국전기전자재료학회 2010 전기전자재료학회논문지 Vol.23 No.12
Nd and Ti co-doped bismuth ferrite $(Bi_{1-x}Nd_x)(Fe_{1-y}Ti_y)O_3$ (x, y = 0, 0.05, 0.1, 0.2) ceramics and thin films were synthesized through the conventional mixed-oxide process and pulsed laser deposition (PLD), respectively. Nd and Ti co-doping effect was examined with emphasis on how these impurities affect phase formation behavior as there could be the improvement in leakage current problems often associated with multiferroic $BiFeO_3$ (BFO) thin films. The lattice constants of BFO ceramics decreased with Nd doping concentration up to 10mol%, while they further decreased with Nd and Ti co-doping to about 20%. BFO thin films obtained by the PLD process revealed random polycrystalline structure. Similar to bulk BFO ceramic, Nd and Ti co-doping effectively suppressed the formation of unwanted secondary phase and thus stabilized the perovskite phase in BFO thin films.
(Bi,Nd)(Fe,Ti)O3 세라믹스와 박막의 상형성 거동
김경만,이희영 한국전기전자재료학회 2010 전기전자재료학회논문지 Vol.23 No.12
Nd and Ti co-doped bismuth ferrite (Bi1-xNdx)(Fe1-yTiy)O3 (x, y = 0, 0.05, 0.1, 0.2) ceramics and thin films were synthesized through the conventional mixed-oxide process and pulsed laser deposition (PLD), respectively. Nd and Ti co-doping effect was examined with emphasis on how these impurities affect phase formation behavior as there could be the improvement in leakage current problems often associated with multiferroic BiFeO3 (BFO) thin films. The lattice constants of BFO ceramics decreased with Nd doping concentration up to 10mol%, while they further decreased with Nd and Ti co-doping to about 20%. BFO thin films obtained by the PLD process revealed random polycrystalline structure. Similar to bulk BFO ceramic, Nd and Ti co-doping effectively suppressed the formation of unwanted secondary phase and thus stabilized the perovskite phase in BFO thin films.