FTS법을 이용한 ITO박막의 제작

김건희,금민종,김한기,손인환,장경욱,이원재,최형욱,박용서,김경환,Kim, Geon-Hi,Keum, Min-Jong,Kim, Han-Ki,Son, In-Hwan,Jang, Kyung-Wook,Lee, Won-Jae,Choi, Hyung-Wook,Park, Yong-Seo,Kim, Kyung-Hwan 한국전기전자재료학회 2004 전기전자재료학회논문지 Vol.17 No.11

The ITO thin films were prepared by the FTS(Facing Targets Sputtering) system. The ITO thin films are deposited by changing the input current and working gas pressure. Then, electric characteristics, transmittance and surface roughness of ITO thin films were measured by Hall effect measurement, UV-VIS spectrometer and AFM. As a result, the ITO thin film was fabricated with resistivity 6xl0$^{-4}$ Ωㆍcm, carrier mobility 52.11 $\textrm{cm}^2$/Vㆍsec, carrier concentration 1.72 x $10^{20}$ $cm^{-3}$ transmittance over 85 % of ITO film at working gas pressure 1 mTorr and input current 0.6 A.

부처손(Selaginella tamariscina) 추출물의 리파아제 저해 활성 및 지질 축적 억제 효과

김건희,이신영,이애랑,Kim, Gun-Hee,Lee, Shin-Young,Lee, Ae-Rang 한국식품영양학회 2019 韓國食品營養學會誌 Vol.32 No.1

The objective of this study was to evaluate novel usability as natural anti-obesity supplement of Selaginella tamariscina extract. The total phenol contents and total flavonoid contents were $60.29{\pm}3.11GAE\;mg/g$ and $14.90{\pm}0.34QE\;mg/g$, respectively. To evaluate anti-obesity activity of Selaginella tamariscina extract, pancreatic lipase inhibition activity as well as its inhibition effect of lipid accumulation in adipocytes were conducted by Oil Red O staining and lipolysis assay. The result of pancreatic lipase inhibition activity of S. tamariscina extract showed a wide range between 40 and 73% dose dependently. While the incubation of 3T3-L1 cells with S. tamariscina extract inhibited differentiation of preadipocytes and reduced lipid accumulation, the level of released free glycerol into culturing medium was increased in multiple concentrations. These results showed that S. tamariscina extract inhibit adipogenesis and pancreatic lipase activity. Thus, S. tamariscina extract can be a candidate for regulating lipid accumulation in obesity.

고속카메라를 이용한 공구 절입시 변형 형상에 관한 연구

김건희,정우철,윤길상,신광호,허영무,Kim, Kun-hee,Jung, Woo-chul,Yoon, Gil-sang,Sin, Kwang-ho,Heo, Yeong-mu 한국금형공학회 2008 한국금형공학회지 Vol.2 No.1

The object of this study is a manufacture of buff die using CAM systems. Systems are consist of AutoCAD, CAM software and CNC milling machine. CAM software is purpose of G-code generation for CNC programming. Then CAM software and CNC milling machine are connect to RS-232-C cable for networking.

공작기계 특성을 고려한 최적연삭조건 설정방법

김건희,Kim, Gun-Hoi 한국생산제조학회 1998 한국공작기계학회지 Vol.7 No.5

In order to utilize the information of well-know grinding database or grinding machine characteristics, a database needs to be designed by considering the delicate property of the machine tools for the high precision and quality of the demanding specification. Among the machine tools for the high precision and quality of the demanding specification. Among the machine tools, machining conditions of the grinding are various and knowledge repeatance obtained form the grinding process are less credable. therefore it is desirable for database, which is used to set the grinding conditions, to utilize the maximum machine tool capability. The present paper studied on the occurance limit of chatter vibration and burn considering the characteristics of machine tool. And also basic experiments were performed to establish the optimum grinding conditions which could maximize the grinding efficiency.

천체관측용 적외선 광학계 초정밀 가공

김건희,진호,양순철,김명상,국명호,이성호,육인수,Kim, Geon-Hee,Jin, Ho,Yang, Sun-Chol,Kim, Myung-Sang,Kook, Myung-Ho,Lee, Sung-Ho,Yuk, In-Soo 한국천문학회 2007 天文學論叢 Vol.22 No.3

The KASINICS (Korea Astronomy and Space science Institute Near Infrared Camera System) is a ground-based near-infrared (NIR) imaging instrument. KASINICS has offner relay optics to reduce unwanted infrared light. For the offner optics, we adopted an ultra precision machining process which is installed at KBSI (Korea Basics Science research Institute). Since the offner relay optics is made of aluminum 6061 metal material, we did several tests to reach the specification. We found that a 0.497mm radius nose bite and 220m/min machining speed are best tool and condition to make this offner optics with the precision machine. In this paper, we report the technical method of ultra precision machining and results of the KASINICS offner optics.

북한강 수역에 분포하는 Pseudanabaena 균주의 동정 및 2-MIB 생산 잠재성 분석

김건희,이세진,서경화,황순진,Kim, Keonhee,Lee, Sejin,Seo, Kyunghwa,Hwang, Soon-Jin 한국하천호수학회 2020 생태와 환경 Vol.53 No.4

이취미 물질인 2-MIB를 합성하는 원인종에 대한 정보는 담수생태계에서 이와 관련된 환경 및 경제적 문제를 해결하는 데 필수적이다. 본 연구는 북한강 수계에서 출현하는 Pseudanabaena strain을 분리·배양하고, 16S rDNA 염기서열을 이용하여 종 수준의 동정과 2-MIB 합성 유전자 탐색을 통해 이취미 물질 발생 잠재성을 분석하였다. 북한강 본류 지역(삼봉리, 조암면, 의암호 지역)에서 분리한 Pseudanabaena strain은 총 11개로서 NHUA201911과 NHPD201909 strain을 제외하고 단일세포의 크기는 서로 유사하였다. 그러나 16S rDNA 계통분석을 통한 유전자 염기서열의 유연관계를 분석한 결과, 분리된 strain들은 총 5개 종(P. cinerea, P. yagii, P. mucicola, P. galeata, P. redekei)으로 분류되었다(40~55% 유사도). 2-MIB를 합성하는 mibC 유전자는 P. cinerea 07 strain (NHUA202007-07)와 P. yagii (NHUA202007-08), P. redekei (NHUA201911)에서만 발견되었으며, 가스크로마토그래피 분석에 따라 실질적인 2-MIB 합성은 P. cinerea와 P. redekei 종에서 확인되었다. 본 연구결과는 분자생물학적 수준에서 북한강 수역에서 발생하는 Pseudanabaena속 남조류의 다양도에 대한 증거를 제공하는 연구로서 북한강 수계에서 2-MIB 생산 원인종에 대한 중요한 정보를 제공한다. Identification of the target species of 2-MIB (2-methyllisoborneol) production is crucial in the management of off-flavor problem in the freshwater system. This study was conducted to identify 2-MIB-producing Pseudanabaena strains occurring in the North Han River system using molecular genetic method. Eleven phenotypes of Pseudanabaena were isolated from several mainstream sites of the North Han River, including Sambong-ri, Joam-myun, and Lake Uiam areas. Despite of morphological similarity of the strains, the phylogenetic analysis using 16S rDNA classified them into different species with low genetic similarity (40~55%). Isolated Pseudanabaena strains were converged to four species; Pseudanabaena cinerea, P. yagii, P. mucicola, and P. redekei. Among them, the 2-MIB synthesizing gene (mibC) was detected in P. cinerea, P. yagii, and P. redekei. However, actual 2-MIB production was detected only in P. cinerea and P. redekei based on gas chromatography analysis. This study is the first report of the molecular identification of Pseudanabaena strains and their 2-MIB production potential in Korea. The results of this study provides an evidence of species diversity of Pseudanabaena occurring in the North Han River.

MPEG-4 비디오 스트림의 디지털 저작권 관리를 위한 암호화 기법 연구

김건희,신동규,신동일,Kim Gunhee,Shin Dongkyoo,Shin Dongil 한국정보처리학회 2005 정보처리학회논문지 C : 정보통신,정보보안 Vol.12 No.2

본 논문에서는 MPEG-4 스트림의 디지털 저작권 관리(DRM)를 위한 암호화 방법을 제안한다. MPEG-4는 멀티미디어 스트리밍을 위한 표준이며 MPEG-4 파일 포맷에 따라 저장된다. 인가된 사용자들만 접근이 가능하도록 MPEG-4 파일 포맷으로부터 추출된 I-VOP, P-VOP의 매크로 블록(MB)들과 모션 벡터(MV)들을 암호화하는 3가지 방법을 설계하였고, MPEG-4 데이터의 암호화에는 DES(Data Encryption Standard)를 사용하였다. 이러할 암호화 방법을 기반으로 MPEG-4 데이터 스트리밍을 위한 인터넷 방송 서비스용 DRM 솔루션을 구현하고, 최적의 암호화 방법을 선택하기 위해 복호화 속도 및 영상의 품질을 비교하였다. This paper presents encryption techniques for digital right management solutions of MPEG-4 streams. MPEG-4 is a format for multimedia streaming and stored in the MPEG-4 file format. We designed three kinds of encryption methods, which encrypt macro blocks (MBs) or motion vectors (MVs) of I-, P-VOPs (Video Object Planes), extracted from the MPEG-4 file format. We used DES to encrypt MPEG-4 data Based on theses three methods, we designed and implemented a DRM solution for an Internet broadcasting service, which enabled a MPEG-4 data streaming, and then compared the results of decryption speed and quality of rendered video sequences to get an optimal encryption method.

제품의 고부가가치 창출등 산업 전반에 걸쳐 파급효과 증대

김건희,Kim, Geon-Hui 한국광학기기산업협회 2006 光學世界 Vol.106 No.-

21세기 들어 BT, IT, NT, ST 관련 첨단산업이 우리나라의 미래를 선도할 산업으로 새롭게 부각되고 있다. 이들 산업의 핵심 부품 가공에 다이아몬드 선반을 이용한 초정밀 가공 기술은 계속해서 활용폭이 커질 뿐만 아니라 현재보다 한 단계 더 높은 가공정도, 즉 마이크로 이하 나노단위의 초정밀 가공기술이 요구될 것이다. 따라서 우리나라의 초정밀 가공 기술 분야에서 국가적인 기술요구에 부응하고 선진국에 대한 기술경쟁력을 확보하기 위해서는 다이아몬드공구 및 연삭 휠을 이용한 초정밀 가공의 기초 기술에 대한 보다 많은 연구가 필요하다.

자동차 연료튜브 홀더용 이중사출 금형·성형기술

김건희,윤길상,허영무,정우철,신광호,Kim, Gun-Hee,Yoon, Gil-Sang,Heo, Young-Moo,Jung, Woo-Chul,Shin, Kwang-Ho 한국금형공학회 2007 한국금형공학회지 Vol.1 No.1

Double injection molding process is very efficient molding-method for molding the products which is consist of multi-materials. Fuel-tube holder which is necessary for automobil power train and circulation systems is composed of plastic and rubber materials to minimize the vibration and pulsation noises. In existing process, fuel-tube holder was made by the insert molding process or assembly process after molding. If fuel-tube holder is manufactured by double injection molding process, it may be realize to improve the product quality, efficiency of molding-process and retrenchment of manufacturing cost. In this study, for manufacturing fuel-tube holder by double injection molding process, the analysis of joining characteristics between PA6(polyamide 6) and TPE(thermoplastic elastomer) was executed and the double injectin mold for molding fuel-tube holder with core toggle mechanism was fabricated. Finally, fuel-tube holder was molding using fabricated double injection mold.

뽕나무(Morus alba)와 꾸지뽕나무(Cudrania tricuspidata)의 부위에 따른 항산화 활성 및 3T3-L1세포 지방축적 억제 효과

김건희,김은향,Kim, Gun-Hee,Kim, Eunhyang 한국식품영양학회 2019 韓國食品營養學會誌 Vol.32 No.2

In this study, we examined antioxidative effects and the anti-adipogenesis effect of different parts of Cudrania tricuspidata (C), and Morus alba (M). Total polyphenol contents were highest in M-root ($34.56{\pm}0.045mg\;GAE/g$), and there was no significant difference, between C-root and M-leaf. Total flavonoid contents of C-root were highest ($23.07{\pm}0.004mg\;QE/g$). To examine antioxidant activities of C and M extracts, DPPH and ABTS radical scavenging activity, and FRAP assay, was used. Results show that antioxidant activities of C and M extracts increased, in a dose-dependent manner. Adipocytes are generated by preadipocyte differentiation, during adipogenesis. Matured adipocytes accumulate in abnormal and cause obesity. We investigated effects of leaf and root extracts of C and M, on lipid accumulation, in 3T3-L1 adipocytes. Changes in cell morphology, and degrees of lipid accumulation in adipocytes, were evaluated by Oil Red O staining. Root extracts of C and M, reduced lipid content in a dose-dependent manner. Therefore, root extracts of C and M, may be good candidates for managing obesity.