http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김갑부(Kim, Kab-Boo),문준호(Moon, Jun-Ho),구교영(Gu, Kyo-Young),전영우(Cheon, Young Woo),김영욱(Kim, Young-Uk) 한국산학기술학회 2016 한국산학기술학회논문지 Vol.17 No.4
입도분포가 다양한 입자크기로 이루어져 있는 지반은 일반적으로 지반의 강도가 좋다. 입도분포가 다양하지 않음에 도 충분한 지지력을 가지고 있는 지반이 더러 있는데, 이러한 지반의 특징은 Gap 입도로 분포되어 있다는 것이다. 이를 바탕 으로 유추하여보면 입자의 크기가 다양하지 않더라도 적절한 입도의 배치를 통해 강한 지반이 조성될 수 있음을 알 수 있다. 이 연구에서는 임의로 조성한 Gap 입도시료와 well, uniform 입도시료와의 내부마찰각의 변화에 대하여 고찰하였다. 큰 입자 와 작은 입자 크기의 비율에 따라서 시료를 조성한 후 직접전단시험을 수행하여 지반의 강도정수를 구하고 결과를 비교 분석 하였다. 연구결과 시료의 입자크기비와 내부마찰각을 연관시킬 수 있었으며 입도의 분포가 Gap이라고 하더라도 주어진 조건 에서 가장 큰 입자 크기비를 가지고 있는 시료가 다양한 입도분포의 시료보다 큰 마찰력을 가질 수 있음을 알 수 있었다. 또한 중간입자크기를 가지고 있는 시료로 조성한 uniform시료보다도 같은 입자 크기의 Gap 입도 시료가 더 큰 강도를 지니고 있었다. 비교적 간단한 입도의 조정만으로도 대상 지반의 강도를 추가적으로 증대시킬 수 있는 공법개발의 기초를 확립하였다. Soils with various particle sizes generally show good shear strength. Some soils have a relatively strong resistance to shear failure in spite of narrow particle distribution, such as gap grading. Based on this example, it can be inferred that appropriate arrangements of particle size in soils might result in an increase in shear strength. This study investigates the strength variation of soils with respect to the particle size distribution. Gap, well, and uniform graded soils were prepared with a desired ratio, and a wide range of direct shear tests were done using the prepared samples. The test results show that there is a strong relationship between the particle size ratio and internal frictional angle. Gap graded soil has a greater frictional angle than a well-graded sample, even when specimens have the same maximum particle size, which is also the case for the uniform grade specimen. The results have potential for developing a methodology for stronger soils through a simple manipulation of particle size distribution.
지하철 터널에서의 위험도 분석을 통함 지반조사 신뢰성 평가
김환준,김우성,김영근,이두화,박진우,김갑부 한국암반공학회 2004 한국암반공학회 학술대회 및 세미나 자료집 Vol.- No.-
본 연구에서는 도심지 지하철 터널을 대상으로 지반공학적 위험요소가 공사비 및 공기에 미치는 영향을 정량적으로 평가하기 위하여 잔여 리스크 개념을 이용하여 조사개소의 증가에 따른 공사비 및 공기의 신뢰도를 분석하였다. 신뢰도 분석결과 지반조사 개소가 증가함에 따라 공사비 및 공기에 대한 위험도가 축소됨을 확인하였으며, 이러한 결과를 통하여 도심지 지하철 터널에서의 지반공학적 위험도 분석의 유용성을 확인하였다.
배규진,최순욱,장수호,이규필,송봉찬,김갑부,Bae, Gyu-Jin,Choi, Soon-Wook,Chang, Soo-Ho,Lee, Gyu-Phil,Song, Bong-Chan,Kim, Kab-Boo 한국터널지하공간학회 2015 한국터널지하공간학회논문집 Vol.17 No.4
디스크커터 내부부품의 손상과 관련된 원인은 씰(seal)부의 손상으로 인한 윤활유 부족, 토사 및 수분의 침투, 과부하, 과열, 조립문제, 소재문제 등이 있으며 손상 정도에 따라 디스크커터의 작동여부, 즉 회전이 가능한지가 나타난다. 따라서 디스크커터 회전문제에서의 핵심은 베어링의 작동여부라고 할 수 있다. 본 연구는 TBM의 굴착도구인 디스크커터의 재활용에 도움이 되고자 현장 적용된 디스크커터를 회수한 후 분해하여 내부부품을 조사하고 분석하였다. 그 결과, 허브의 부하영역에서의 스크래치는 재활용을 위해 가공작업이 필요한 것으로 나타났으며, 플로팅 씰의 래핑면과 오일상태는 재활용을 위한 성능파악에 필요한 시험으로 판단되었다. 특히 플로팅 씰은 베어링의 정상작동여부에 중요한 영향을 미치는 부품으로 파악되었다. 그 외의 베어링, 샤프트, 씰 리테이너에서는 특이사항이 없는 것으로 나타났다. The problems for non-rotating of a disc cutter proceed from the faults in inner parts of the disc cutter such as the leak of hydraulic fluid, the intrusion of tunnel mucks and water, overloading, overheating, poor assembly and substandard material. The rotating of a disc cutter is an indicator to show that the inner parts of disc cutter is operable, although the rotational torque depends on the extent of the damage. Therefore, the key in the problems for non-rotating of disc cutter is to maintain that the tapered roller bearings are working properly. This study aims to investigate the inner parts disassembled from disc cutters applied to the field tests in order to help decision for reuse of the disc cutters. As results, surface finishing to remove the scratch on the load zone of the hubs is needed, with the intent to reuse a hub. And the investigation of lapping surface by optical microscope of floating seals and the contamination test of oil need to be performed for reuse of a disc cutter. Especially, the analysis results show that the floating seals play a key role in the normal operation of bearings. There is nothing significant to report in the rest parts such as bearing, shaft, seal retainers.
문준호(Jun-Ho Moon),신진화(Zhen-Hua Xin),김갑부(Gab-Boo Kim),문선미(Sun-Mi Moon),김영욱(Young-Uk Kim) 한국산학기술학회 2018 한국산학기술학회논문지 Vol.19 No.1
일반적으로 지반의 강도가 강한 지반은 입도분포가 양호하다고 예상할 수 있다. 그러나 Gap입도로 이루어진 지반으로 입도분포가 불량하더라도 지반의 강도가 강한 경우가 있다. 본 연구에서는 이와 같은 사실에 근거하여 인위적으로 조성한 Gap 입도시료와 입도분포가 균일한 시료, 양호한 시료를 직접전단시험을 통하여 지반의 강도정수를 구하고 이를 비교 분석하였다. 또한 13mm 골재와 19mm 골재를 이용한 평판재하시험으로 확대 적용하여 현장 적용성과 입도에 따른 강도 변화의 재현성을 확인하였다. 실험 결과 입자크기비와 내부마찰각이 상관관계가 있음을 확인 할 수 있었고, 특정한 입자 크기비의 범위에서 전단저항각이 상당히 커지는 것을 알 수 있었다. 또한 평판재하시험으로 극한지지력을 산정한 결과 입도조정법이 강도증가율에 크게 영향을 미치는 것을 알 수 있다. 따라서 위의 직접전단 시험을 통한 시험적 검증과 평판재하시험을 통한 재현성 확인을 통해 입도분포가 좋지 않음에도 간단한 입도 조정만으로 지반의 강도 증진을 유도할 수 있었다. In this study, an artificially formed Gap graded soil, designed to increase its shear strength, was analyzed to determine the strength parameters through direct shear tests. Uniform and fine grain size samples were compared to the Gap graded soil to investigate the increase in the shear strength. Plate loading tests were conducted using 13mm and 19mm aggregates to confirm the reproducibility of the strength enhanced samples for site application. This test confirmed that the particle size ratio and the internal friction angle are correlated to the shear strength, and the shear resistance angle significantly increased in the specific particle size ratio range. The calculation of the ultimate bearing capacity by the plate load test demonstrated that the grain size adjustment method greatly influences the strength increase rate. Therefore, the findings were verified and it was confirmed that a high shear strength is achievable despite the existence of a poor particle size distribution.