http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
수치해석을 이용한 전동차용 IGBT 모듈의 피로 수명 예측
권오영,장영문,이영호,좌성훈,Kwon, Oh Young,Jang, Young Moon,Lee, Young-ho,Choa, Sung-Hoon 한국마이크로전자및패키징학회 2017 마이크로전자 및 패키징학회지 Vol.24 No.1
본 연구에서는 전동차의 전력 변환 장치로 많이 사용되고 있는 고전압 대전류용(3,300 V/1200 A급) insulated gate bipolar transistor(IGBT) 모듈에 대하여 열 사이클 조건하에서의 열-기계적 응력해석 및 피로수명해석을 수행하였다. 특히 최근 고전압 IGBT용으로 개발되고 있는 구리(copper) 와이어, 리본(ribbon) 와이어를 사용하였을 경우의 응력 및 피로수명을 기존의 알루미늄 와이어와 비교하여 분석하였다. 알루미늄 와이어 보다는 구리 와이어에 응력이 3배 이상 많이 발생하였다. 리본 와이어의 경우 원형 와이어 보다 응력이 더 크게 발생하며, 구리 리본 와이어의 응력이 제일 높았다. 칩과 direct bond copper(DBC)를 접합하고 있는 칩 솔더부의 피로해석을 수행한 결과, 솔더의 크랙은 주로 솔더의 모서리에서 발생하였다. 원형 와이어를 사용할 경우 솔더의 크랙은 약 35,000 사이클에서 발생하기 시작하였으며, 알루미늄 와이어 보다는 구리 와이어에서의 크랙의 발생 면적이 더 컸다. 반면 리본 와이어를 사용하였을 경우 크랙의 면적은 원형 와이어를 사용하였을 경우보다 적음을 알 수 있다. DBC와 베이스 플레이트 사이에 존재하는 솔더의 경우 크랙의 성장 속도는 와이어의 재질이나 형태에 관계없이 비슷하였다. 그러나 칩 솔더에 비하여 크랙의 발생이 일찍 시작하며, 40,000 사이클이 되면 전체 솔더의 반 이상이 파괴됨을 알 수 있었다. 따라서 칩 솔더 보다는 DBC와 베이스 플레이트 사이에 존재하는 솔더의 신뢰성이 더 큰 문제가 될 것으로 판단된다. In this study, the thermomechanical stress and fatigue analysis of a high voltage and high current (3,300 V/1200 A) insulated gate bipolar transistor (IGBT) module used for electric locomotive applications were performed under thermal cycling condition. Especially, the reliability of the copper wire and the ribbon wire were compared with that of the conventional aluminum wire. The copper wire showed three times higher stress than the aluminum wire. The ribbon type wire showed a higher stress than the circular type wire, and the copper ribbon wire showed the highest stress. The fatigue analysis results of the chip solder connecting the chip and the direct bond copper (DBC) indicated that the crack of the solder mainly occurred at the outer edge of the solder. In case of the circular wire, cracking of the solder occurred at 35,000 thermal cycles, and the crack area in the copper wire was larger than that of the aluminum wire. On the other hand, when the ribbon wire was used, the crack area was smaller than that of the circular wire. In case of the solder existing between DBC and base plate, the crack growth rate was similar regardless of the material and shape of the wire. However, cracking occurred earlier than chip solder, and more than half of the solder was failed at 40,000 cycles. Therefore, it is expected that the reliability of the solder between DBC and base plate would be worse than the chip solder.
권오영,서경택,Kwon, Oh-Young,Seo, Kyoung-Taek 한국정보통신학회 2022 한국정보통신학회논문지 Vol.26 No.11
Matrix multiplication is a fundamental operation widely used in science and engineering. There is an approximate matrix multiplication method as a way to reduce the amount of computation of matrix multiplication. Approximate matrix multiplication determines an appropriate probability distribution for selecting columns and rows of matrices, and performs approximate matrix multiplication by selecting columns and rows of matrices according to this distribution. Probability distributions are generated by considering both matrices A and B participating in matrix multiplication. In this paper, we propose a method to generate a probability distribution that selects columns and rows of matrices to be used for approximate matrix multiplication, targeting only matrix A. Approximate matrix multiplication was performed on 1000×1000 ~ 5000×5000 matrices using existing and proposed methods. The approximate matrix multiplication applying the proposed method compared to the conventional method has been shown to be closer to the original matrix multiplication result, averaging 0.02% to 2.34%.
권오영,Kwon, Oh-young 한국항공운항학회 2018 한국항공운항학회지 Vol.26 No.3
Stress is the main source of a human error or can potentially contribute to it. Recently, the rate of accidents which is associated with human factors among the total aircraft accidents is showing a tendency of gradual increase. In order to prevent the accidents related to human factors, stress mitigation of the mission personnel is highly required. In this study, a 'stress cognitive alteration' technique, which is one of the stress relief methods, is applied to the Air Force pilots to verify if the technique is effective in reducing stress. The 'stress cognitive alteration' technique is comprised of two parts: a positive function of stress and a process to positively alter the physical, psychological response to stress. As a result of the application, it is found that this technique has an effect of reducing stress of the pilots under a relatively high level of stress.
권오영,Kwon, Oh-young 한국항공운항학회 2021 한국항공운항학회지 Vol.29 No.1
Just culture is an important factors in safety culture, and is related to the degree to which potential risk information is shared. Since the importance of the level of just culture has been highlighted in the aspect that it is related to the prevention of various safety accidents, research on just culture was required. In previous studies, there are attempts to develop a scale to measure the level of just culture and to reveal the degree of predicting the experience of accidents or errors and the actual reporting experience. However, It was not possible to clarify the factors that facilitate and inhibit the level of just culture for the formation of just culture. This study was conducted to help improve the level of the organization's just culture by specifically identifying factors that facilitate and inhibit the impact on the level of the just culture. As a result, it was possible to find the facilitating and inhibiting factors affecting the 6 factors of just culture.
권오영,서경택,Kwon, Oh-Young,Seo, Kyoung-Taek 한국정보통신학회 2015 한국정보통신학회논문지 Vol.19 No.12
경제성을 얻기 위해 단일 카메라를 이용하여 3차원 복원을 수행한 뒤 그 정보를 토대로 운전자에게 전방에 존재하는 장애물의 통과 여부를 알려줄 수 있는 운전 보조 장치에 관한 연구를 진행한다. 그 결과 depth 정보는 떨어지나 직진상의 장애물을 통과 할 수 있는 정보를 제공할 수 있다. 3차원 복원을 위해서는 내부파라미터를 측정하고, 특징점을 찾아 매칭하여 기본행렬을 계산하고 이를 토대로 삼각측량을 수행하여 얻는다. 실험을 통해 결과를 확인해 보면 depth 정보는 불완전하나, 장애물 통과 여부를 판단 할 수 있는 X, Y 축의 정보는 신뢰성을 가진다. Run 3D reconstruction using a single camera, based on the information, we are advancing research on driving assistance apparatus or can be informed how to pass the obstacle existing ahead the driver. As a result depth information falls but it is possible to provide information that can pass through an obstacle on the straight. For 3D reconstruction by measuring the internal parameters, it calculates the Fundamental matrix and matching to find the feature points obtained by executing the triangulation on the basis of this. When the through experiments try to confirm the results, the depth information is present error information in the X and Y axes which can determine whether or not to pass through an obstacle has reliability.
실천공학교육 관련 : 국가직무능력표준을 활용한 컴퓨터공학 교과과정개발
권오영 ( Oh Young Kwon ),장경식 ( Kyung Sik Jang ),민준기 ( Jun Ki Min ) 한국실천공학교육학회 2015 실천공학교육논문지 Vol.7 No.1
국가직무능력표준(National Competency Standards: NCS)은 근로자가 자신의 직업에서 직무를 성공적으로 수행하기 위해 요구되는 능력을 도출하여 국가차원에서 표준화한 것이다. 4년제 대학의 경우 NCS를 활용한 교과과정 개편에 관한 가시적인 계획은 없는 상황이나 대학교 교과과정의 현장성 문제가 지속적으로 제기되고 있고, NCS에 기반한 과정평가형 국가기술자격 도입등으로 4년제 대학교 교과과정에 NCS가 적용될 수 있는가에 대한 검토가 필요하다. 따라서 본 논문은 4년제 대학교 컴퓨터공학전공을 참조하여 NCS 적용 가능성을 탐색하고, NCS를 활용하여 교과과정을 개편 방향을 제시하였다. National Competency Standard (NCS) is a national standard for competencies which are required of an employee to achieve his job successfully. For a university with four-year course, since there is no plan to redesign its subjects by applying NCS and some issues with regard to industrial aspects consistently incur, it should be verified that NCS can be applied to the curriculum of a university following the introduction to new National Qualification Test with the progress evaluation based on NCS. Thus, in this paper, we show the feasibility of applying NCS to the curriculum of a computer engineering department and present the redesign to curriculum using NCS.
고계(古溪) 이휘령(李彙寜)의 학문과 퇴계학맥에서의 위상
권오영 ( Kwon Oh-young ) 연민학회 2019 연민학지 Vol.32 No.-
이 글은 우선 고계(古溪) 이휘령(李彙寜)의 생애를 알아보고, 이어 학문과 사상의 내용을 검토하고, 마지막으로 그의 퇴계학맥(退溪學脈)에서의 위상과 현손(玄孫) 연민(淵民) 이가원(李家源)에게까지 이어지는 가학의 전승을 탐구하였다. 이휘령은 이황의 10세(世) 종손(宗孫)이다. 그는 일찍이 경세치용(經世致用)의 학문에 치중하여 치적(治績)이 당세에 이름이 높았고, 또 가학인 이학(理學)을 깊이 탐구하였다. 그는 이황 이후의 심학(心學)의 전통을 잇는다는 의식이 강하였다. 그는 시(詩)에서 그런 의식을 강하게 드러내었는데, 주희가 「재거감흥(齋居感興)」시(詩)에서 사용했던 ‘추월(秋月)’과 ‘요금(瑤琴)’이란 시어(詩語)를 자주 인용하여 썼다. 그는 다시 주희와 이황의 심학(心學)의 거문고[瑤琴]를 안고 이황의 심학의 옛 곡조[古調]의 메아리를 찾고자 했던 것이다. 한편 19세기 이휘령이 살았던 영남 학계에서는 이황의 적전(嫡傳)이 누구에게 있느냐를 놓고 병호시비(屛虎是非)가 일어나 그 갈등이 심각하였다. 이휘령은 병론(屛論)에 속했지만, 병론과 호론(虎論)이 분열된 뒤에 영남의 연원(淵源)이 있는 고가(古家)가 서로 갈등하여 투쟁을 하자, 양론(兩論) 사이에서 중도(中道)를 지키면서 양론의 보합(保合)을 주장하였다. 이황 이후 진성이씨의 가학은 조선 후기에 그 후손들에 의해 몇 갈래로 전해졌다. 이휘령은 이황 이후 면면히 이어져온 가학을 이었다. 그의 가학은 다시 아들 이만희(李晩憙), 손자인 이중인(李中寅), 증손자인 이상호(李祥鎬) 등에게 전해졌다. 이가원은 어릴 때부터 종숙부(從叔父) 이상호의 문하에 나아가 가르침을 받았다. 이같이 연민학(淵民學)의 출현은 일조일석에 나타난 것이 아니라 이황 이후 이휘령을 거쳐 면면히 이어져온 이학과 가학의 전통에 기초하고 있다고 할 수 있다. This study is designed to research on the history and life of Lee Hui Ryeong (pen name Gogye)'s gahak (家學, family study). Then, the study focused on the his position in the School of Toegye and the transfer of gahak from him to his descendent Lee Ga Won (pen name Yeonmin). Lee Hui Ryeong was a descendant of the 10th generation of Lew Hwang. He was famous at the period as he put priority on the study which was empirical and practical and deeply researched the lihak(理學, Learning of Principle), which was the family study transferred from his ancestors. Most of all, he was very conscious that he had transferred the tradition of the shimhak (心學, Learning of Mind) since the period of Lee Hwang. He expressed this consciousness in his poem by often quoting the poem words such as 'chuwol(秋月, autumn moon)' and 'yoguem(瑤琴, music instrument)' which were used by Zhu Xi in his poem "jaegeogamheung(齋居感興)". He tried to find out the ancient melody of Lee Hang's shimhak by cherishing the geomungo(琴) of Zhu Xi and Lee Hwang's shimhak. On the other hand, the Yeongnam academic circle to which Lee Hui Ryeong belonged during 19th century, there was a severe conflict between the academic schools (Byeongron and Horon) on which school could keep the ancestral tablet of Lee Hwang. When the dispute between two schools was developed into the struggle between old families rooted in Yeongnam, he kept the middle way between two schools and argued for the reconciliation even though he belonged to the school of Byeongron, After the passing of Lee Hwang, the family study belonging to Jinseong Lee family was divided into several studies by his descendents in late Joseong period. He took over the family study which Lee Hwang started and passed it over to his descendent. His study was passed over to his son Lee Man Hee, his niece Lee Man suk, his grandson Lee Jung In, and his grand-grandsons Lee Sang Ho and Lee Young Ho and etc. Lee Ga Won got educated under his uncle Lee Sang Ho. As such, the study of Yeonmin was not made in a day but has been based on the tradition of lihak and gahak which have been passed down from Lee Hwang through Lee Hui Ryeong up to now.
권오영 ( Kwon Oh-young ) 서울대학교 국사학과 2021 韓國史論 Vol.67 No.-
백제의 국가 형성사를 연구하는 데에 가장 기본적인 사료는 ≪삼국사기≫와 ≪삼국지≫이다. 이 두 개의 사서가 전하는 백제 국가형성의 시점과 내용은 판이하게 달라서 둘 중 어떤 사서에 무게를 둘 것인가 하는 것이 한국고대사학계의 오래된 논쟁거리였다. 21세기에 들어와 급증한 고고학적 발굴조사의 결과 백제 국가형성사에서는 ≪삼국지≫의 사료적 가치가 ≪삼국사기≫보다 높음이 명확히 판명되었다. 따라서 기원전 18년 부여-고구려계 이주민인 온조에 의해 백제가 건국되었다는 과거의 믿음은 더 이상 통할 수 없게 되었다. 하지만 이 낡은 견해를 버리지 못한 채, 전문적인 연구가 진행되면서 많은 문제가 발생하고 모순이 심화되고 있다. 앞으로 본격적인 연구를 위해서는 기존의 낡은 도그마를 버리고 백제의 국가 형성을 기원이 아닌 과정으로 이해하여야 한다. 국가형성은 소수의 건국 위인이 주도한 것이 아니라, 청동기시대 이후 한강유역의 여러 정치체 사이에서 전개된 다양한 교섭의 양상임을 인정하여야 한다. 이렇듯 당연한 사실을 재확인한 후에야 비로소 과학적인 연구가 진행될 수 있을 것이다. The most basic sources for studying the history of the formation of Baekje state are “Samguksagi” and “Samgukji”. The timing and contents of the formation of the state by the two documents are quite different, and it has been a long-standing controversy in Korean ancient history. As a result of the rapid archaeological excavation in the 21st century, the historical value of “Samgukji” turned out to be higher than that of “Samguksagi”. Thus, the past belief that Baekje was founded by Onjo, a Buyeo-Koguryo immigrant, in 18 B.C. could no longer work. Without abandoning this old view, many problems and inconsistencies have arisen in the historical circles. For full-fledged research in the future, the existing old dogma should be abandoned and the formation of Baekje state should be understood as a process, not origin. It should be acknowledged that the formation of Baekje state was not led by a small number of founding greats, but by various interactions among various polities in the Han River basin after the Bronze Age. Only after acknowledging the obvious will scientific research be carried out successfully.