http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
권수환,임원현 경주대학교 지역개발연구소 2007 地域開發論叢 Vol.- No.8
This study analyzes the diagram of final concept, in order to establish a master plan for preparing a natural learning and experimental area in Bukchun and its surroundings, Gyeongju. The results could be summarized as follows. The stream of Bockan is the origin of Hyungsan River and it originates in the mountains of Banwon at 800m's length around Ulsan, Gyeongnam. It joins the streams of Choongli and Meonggae, and flows into Hyungsan river, passing through Gyeongju city, Naenam myon, Chunbook myon and Gangdong myon. The length of the river is extended to 62.2 km and to 11,166.80 ㎢ in area. Hyungsan river contains an important water resource for water supply, industrial service water, and agricultural service water for Gyeongju and Pohang city, but unsuitable polluted influents of water supply are due to contaminated increasing materials. The polluted stream normally dries out because of the lack of several side-streams, as a result of insufficient water during the dry season. All of the streams that flow into the East sea also suffer from lack of water, as the slope of those riverbeds is very severe, and the river rapidly drains out into the bay of Young-il. Bukchun showed that the speed of a funning fluid is very fast on a period of flood, but very slow in a period of water shortage about 0.02 m/s. This study is to investigate the its preservation method and suwater supply with ecology preservation and natural practical area in Buckhun. Also, it studies the agricultural service, and preservation water supply of Gyeongju. It was also investigated based on the diagram of final concept and master plan with culture environmental and natural practical area in Buckhun region.
권수환 경주대학교 지역개발연구소 2007 地域開發論叢 Vol.- No.8
In this study, Investigation and comparison interrelationship between DakSil village and Jungja with changes in the phase of times in the Chosun Dynasty period were accomplished to consider various and complicated functions were accomplished in Jungja. 1. ChungAm-Jung had accomplished various functions just like a personal space and social functions such as a landmark of DakSil village, the center of branch villages, the observation of the entrance and exit of village, an observation post of cultivated land, the goal and the passing point of movement to Daksil village and a external symbol of leading lineage village because of changes in the phase of the times and its locational and architectural characteristic that had been profitable to views. 2. Because of changes in the phase of the times and the locational characteristic that SukChun-JungSa had been located in Sukchun valley, an entry to DakSil village, it had accomplished various functions as a passing point of movement to DakSil village, the observation of the entrance and exit of the DakSil village, and a external symbol of the leading lineage village of DakSil village in the latter half of the 17th century. 3. In the latter half of the 17th century, SongAm-Jung before the transfer had various functions just like a personal space and social functions such as an eastern landmark of DakSil village, the observation of the entrance and exit of DakSil village, an observation post of cultivated land and a passing point and goal to move to DakSil village because of its locational characteristic that had been profitable to views. After the transfer, it had accomplished various functions just like a external symbol as leading lineage village of Toll village and a boundary between DakSil and Toll village.
논문 : 개방형 BIM 적용 한옥 부재의 특징형상기반 형상모델링 자동구축시스템 개발에 대한 연구
권수환 ( Soo Hwan Kwun ),박승화 ( Seung Hwa Park ),전한종 ( Han Jong Jun ) 디자인융복합학회 2013 디자인융복합연구 Vol.12 No.2
한국 고유의 전통적 목조 건축양식에 의해 지어진 한옥은 가옥형태의 다양화 및 친환경 주택에 대한 선호도 증가에 따라 관심이 증가하고 있다. 이에 맞추어 한옥 대중화의 일환으로 다양한 연구가 진행 중에 있다. 이러한 연구들 중 하나의 성과로 한옥의 3차원 정보교환을 위한 개방형 BIM연구에서 IFC-XML을 이용한 한옥부재 라이브러리와 개방형 BIM 기반 브라우징 모듈이 개발되었다. 중립 포맷인 IFC에는 형상정보와 XML링크정보를 담고, XML에는 파라메트릭 정보를 담아 이종 BIM 도구들간의 정보교환이 가능하게 되어 한옥설계를 지원할 수 있는 환경을 제공하였다. 하지만 XML을 통해 한옥부재를 제작하려면 이에 관한 전문 지식을 가진 전문가가 코딩을 해야 하며, 하드 코딩방식으로 코딩되기 때문에 한옥 개별부재 하나를 코딩하는데도 수많은 시간이 소요된다. 이를 개선하기 위해 본 연구는 코딩에 대해 지식이 없는 비전문가를 대상으로 하는 IFC-XML 자동구축시스템 개발을 목적으로 한다. 본 연구를 통해 비전문가도 자동구축시스템을 이용하여 각종 한옥 부재를 XML로 구축할 수 있다. 따라서 전문가의 도움 없이 개방형 BIM기반 3차원 한옥 부재 라이브러리의 지속적인 구축을 기대할 수 있을 것이다. Han-ok, which is built according to the traditional Korean wooden architecture, is receiving increasing attention because of increasing preference for diverse house types and environmentally-friendly houses. Accordingly, various studies are in progress as part of popularizing Han-oks. As one of the accomplishments of these studies, in open BIM study for 3D information exchange of Han-ok, a Han-ok member library using IFC-XML and an open BIM-based browsing module have been developed. It provides environment that enables data exchange between different BIM tools by containing geometry data and XML link data in IFC, which is a neural format, and parametric data in XML, to supports Han-ok design. However, to produce Han-ok members with XML, a specialist with expertise must perform coding, and it takes a long time for coding one member of Han-ok because of the hard coding method. To improve this issue, this study aims to develop an IFC-XML Automatic Description System for non-experts who do not have knowledge in coding. This study will enable non-experts to create various Han-ok members by in XML by using the Automatic Description System. Therefore, we can expect to continue building 3D Han-ok member library based on open BIM.
파라메트릭 디자인 기반 한옥 부재의 지식 표현과 활용에 관한 연구
권수환(Kwon, Soo-Hwan),전한종(Jun, Han-Jong) 대한건축학회 2014 대한건축학회논문집 Vol.30 No.7
The purpose of this study is to support han-ok design for supply and popularization of han-ok using parametric design, To achieve this, represent design knowledge of han-ok components based on parametric rules on the basis of modeling principles and geometric association of han-ok to use various computer environment. This is realized to extract design DNA of shape and non-shape through meta modeling that be able systemically to describe information. In addition, construct the 3D Parametric model of han-ok component using this knowledge.