http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
공철원(Cheol-Won Kong),윤종훈(Jong-Hoon Youn),박재성(Jae-Sung Park),은세원(Se-Won Eun),장영순(Young-Soon Jang),이영무(Yeong-Moo Yi) 한국비파괴검사학회 2009 한국비파괴검사학회지 Vol.29 No.4
우주 발사체는 매우 높은 신뢰도의 경량구조가 필요하다. 비파괴검사 방법 등을 이용한 구조 건전성 관리가 중요하다. 본 논문에서는 우주발사체의 제작 및 검사에 실제 사용되었던 비파괴검사 사례 중 일부를 정리하였다. 겸사 방법으로는 초음파, X-ray, tapping, 음향방출 등이 사용되었고, 하드웨어로는 페이로드 페어링, 고압탱크, 체결부 및 접합부 등을 대상으로 하였다. 페이로드 페어링에서는 샌드위치 미접착 검사의 정량적 기준을 제시하였고, 고압탱크는 내압 인증시험시 내압증가에 따른 음향방출 데이터를 정리하였다. 샌드위치 체결부에서는 음향방출 신호의 주파수 변화에 따른 파손모드를 분석하였고, 이종재료 접합 구조에서는 미접착부 초음파검사를 위한 표준시편을 제시하였다. 이러한 분석 및 기록은 발사체 시스템을 구성하여 어떠한 상황이 발생하여도 신속하게 판단할 수 있는 근거가 될 수 있으며 발사체 시스템의 신뢰도를 높여주는 역할을 한다. Space launch vehicles require highly reliable, lightweight structures. It is thus important to monitor the structural health of these components with nondestructive inspections. In this paper, we studied an example of a nondestructive inspection that was partially applied to the manufacture and inspection of a launch vehicle. Ultrasonic tests, X-rays, tapping, and acoustic emissions comprised the inspection method. A payload fairing, high pressure tank, fastener part, and bonding part were used as hardware to be inspected. We proposed a quantitative standard for debonding inspection of the payload fairing and acoustic emission data for the proof test of the high pressure tank. We analyzed the fracture mode of the sandwich fastener part according to frequency changes. We also proposed a standard specimen for ultrasonic inspection of bonds of different materials. The present analyses and results provide data for evaluation of the launch operation sequence to ensure launch vehicles afford high reliability.
공철원(Cheol-Won Kong),남기원(Gi-Won Nam),이영무(Yeong-Moo Yi),Akira Ohnishi 한국항공우주연구원 2011 항공우주기술 Vol.10 No.1
다공성 소재의 열 확산도 측정 시스템을 개발하였다. 열확산도를 측정하는 다양한 시스템이 있지만 다공성 소재의 열확산도를 측정하는 것은 기존의 시스템으로는 어렵다. 본 논문에서는 주기가열법을 이용한 열확산도 측정시스템 및 장비의 검증에 대하여 정리하였다. 주기가열법을 검증하기 위해서 사용한 표준시편은 세라믹 소재를 사용하였다. 그 결과 표준값과 측정값이 일치함을 보였다. 다공성 소재 적용을 위하여 검증한 시편은 폴리스티렌폼이었다. 진공에서 열확산도 값도 측정하였는데, 진공에서 열확산도는 대기조건과 비교하여 63% 감소함을 보였다. 두 결과 모두 측정값과 표준값은 10% 오차 범위 이내에 있었다. A system of measurement for the thermal diffusivity of porous materials was developed. Although there are several measurement systems for thermal diffusivity, it is typically difficult to measure the thermal diffusivity of porous materials. This paper presents a measurement system for thermal diffusivity that utilizes a cyclic heating method along with the verification of the measured device. To verify the cyclic heating method, the available reference data of aceramic specimen was utilized. To apply the system to an actual porous material, polystyrene foam was tested. The thermal diffusivity of the polystyrene foam under vacuum was reduced by 63%. The measured values from both tests were in good agreement with the reference values, as they were within 10% of these values.