http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고재철,김진호,전제열,박영구,김승호,박준석 유기성자원학회 2009 유기물자원화 Vol.17 No.1
This research was conducted to evaluate pyrolysis characteristics of the sludge discharged from paper mill process with sintering temperature. The sludge was composed of 70.72% of moisture, 9.52% of volatile solids, and 19.76% of ash, respectively. The sludge contained high 66.40% of Fe2O3 and CaO(15.80%), Al2O3(9.42%), and SO3(3.75%) components, and minor SiO2, Na2O, and Cr2O3 were also contained in it. The other components except Fe2O3 and Cr2O3 were slightly decreased with increase of sintering temperature. Specific surface area of the sludge before sintering was 130m2/g and ones after sintering at 400℃ and 700℃ were 114m2/g and 33m2/g respectively. Specific surface area of sludge was decreased with increase of sintering temperature. From the result of TG-DTA, it was shown that weight of the sludge was decreased by moisture and organic loss until 600℃ and decreased by volatilization of metal components and additional combustion of carbon until 800℃. 본 연구는 제지공정에서 발생하는 슬러지의 소성온도에 따른 열분해 특성을 파악하기 위하여 실시되었다. 제지슬러지의 수분, 가연분 및 회분 함량은 각각 70.72%, 9.52%, 19.76%로 나타났다. 제지슬러지에는 Fe2O3가 66.40%로 가장 많이 함유되어 있었으며, CaO(15.80%), Al2O3(9.42%), SO3(3.75%)와 그 밖에 SiO2, Na2O, Cr2O3 등도 미량 함유되어 있었다. 소성 전 보다 소성 후 그리고 소성온도가 증가함에 따라 Fe2O3와 Cr2O3를 제외한 다른 원소들의 상대적 함유량은 약간씩 감소하였다. 소성 전 제지슬러지의 비표면적은 130㎡/g이었으며, 400℃와 700℃에서 소성한 슬러지의 비표면적은 각각 114㎡/g와 33㎡/g으로 소성온도가 높아짐에 따라서 비표면적 값이 감소하였다. 열중량 분석 결과 600℃까지는 결합수와 유기물 분해에 의한 중량 감소가 나타났으며, 800℃이후에는 금속들의 휘발 및 미연탄소분 연소에 의한 중량감소가 나타났다.
디지털 SOP 기반의 기능연속성 관리체계 적용 방안에 관한 연구 - 금융권 BCP시스템 사례를 바탕으로 -
고재철,안일규,정종수 한국재난정보학회 2020 한국재난정보학회 학술대회 Vol.2020 No.11
본 논문에서는 2018년 1월 19일 「재난 및 안전관리기본법」에서 법제화된 기능연연속성계획(COOP)의 관리체계를 효과적 으로 유지관리하기 위한 방안에 대해 연구하였다. 적용대상은 모든 중앙행정기관과 지방자치단체, 그 외 「재난 및 안전관리기 본법」 시행령에 기재된 지방행정기관·공공기관이다. 현재 기능연연속성계획을 수립하였거나 수립중인 기관은 2020년 행정안전부에서 배포한 「기능연속성계획 수립 지침」 및 「기업재난관리표준」에 따라 작성하였다. 이렇게 각 재난관리책임기관에서 수립된 기능연속성계획은 매년 행정안전부의 평가 를 받아야하며 또는 행정안전부가 인정한「재해경감 우수기업 인증」 인증기관을 통해 인증 받을 경우에는 기능연속성계획 평 가를 3년간 유예 받을 수 있다. 다만 이러한 기능연속성계획이 재난관리책임기관에 정착하는 초기에 있어 법 취지 맞게 목적 및 실효성을 확보하기 위해서는 제도를 운영하는 주관부처의 노력과 의지도 중요하지만, 각 기관에서 지속적인 운영관리가 될 수 있는 체계적인 시스템 마련도 매우 중요하다. 기능연속성계획에 대한 문서 및 문서화된 정보는 「기업재난관리표준」에 따라 기밀성, 정합성, 가용성, 최신성이 지속적으로 확보되어야 하며, 현재의 문서화된 매뉴얼 방식으로는 3년 이라는 인증 유효기 간으로 인해 지속적이고 최신화된 유지관리가 현실적으로 어렵다. 본 연구에서는 앞서 공공기관 기능연속성계획과 유사한 제도를 도입하여 안정적으로 운영중인 금융권의 영업연속성계획 및 영업연속성계획 관리시스템을 검토하여 디지털 SOP(Standard Operating Procedure) 기반의 기능연속성관리체계 (Continuity of Operation Management System)의 적용 방안에 대해 연구 하였다.
Crocosmia의 캘러스 유도 및 자구 형성에 미치는 생장조절제의 영향
고재철,이은주,박현근 한국화훼산업육성협회 2007 화훼연구 Vol.15 No.4
우리나라 자연 상태의 노지재배에서 종자번식이 되 지 않는 크로코스미아의 기내증식을 위하여 2,4-D, NAA, kinetin, BA 처리가 캘러스 및 소자구 형성 등 에 미치는 영향을 조사하였다. 어린자방 배양에서 캘러 스 형성율은 BA와 2,4-D 혼합 처리에서 1~28%로 나타났으며 기내 뿌리 발생은 2,4-D, NAA 단독처리 에서 양호하였다. 소화를 이용한 배양에서는 kinetin+2,4-D, kinetin+NAA 조합에서 뿌리만 형성되기도 하 였다. rhizome 배양에서 줄기 형성에는 kinetin 단독 처리, kinetin+2,4-D 혼합처리가 양호하였으며 캘러스 형성에는 2,4-D 단독처리, 2,4-D+BA, 2,4-D+kinetin 혼합처리에서 25~92.8%의 형성율을 나타냈으며 corm 형성에서는 kinetin 처리와 kinetin+ 2,4-D 0.1 mg·L-1 처리구에서 30~70%의 높은 형성율을 보였다. For in vitro propagation of crocosmia, which can not be propagated by seeds in the fields outside of greenhouse in Korea, effects of 2,4-D, NAA, kinetin and BA on the formation of callus and cormlets were investigated. The percentage of callus formation from the culture of young ovary was only 1~28% in a combined treatment of BA and 2,4-D. However, root formation was excellent even in a single treatment of either 2,4-D or NAA. In the culture using florets, a combined treatment of kinetin+2,4-D or kinetin+ NAA resulted in root formation. From the rhizome culture, a single treatment of kinetin and a combined treatment of kinetin+ 2,4-D showed good results for stem formation, and a single treatment of 2,4-D and a combined treatment of 2,4-D+ BA or 2,4-D+ kinetin resulted in 25~92.8% callus formation. At the same time, a single treatment of kinetin and a combined treatment of kinetin+ 0.1 mg ·L-1 2,4-D showed 30~70% corm formation.