http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
3D 웨이퍼 전자접합을 위한 관통 비아홀의 충전 기술 동향
고영기,고용호,방정환,이창우,Ko, Young-Ki,Ko, Yong-Ho,Bang, Jung-Hwan,Lee, Chang-Woo 대한용접접합학회 2014 대한용접·접합학회지 Vol.32 No.3
Through Silicon Via (TSV) technology is the shortest interconnection technology which is compared with conventional wire bonding interconnection technology. Recently, this technology has been also noticed for the miniaturization of electronic devices, multi-functional and high performance. The short interconnection length of TSV achieve can implement a high density and power efficiency. Among the TSV technology, TSV filling process is important technology because the cost of TSV technology is depended on the filling process time and reliability. Various filling methods have been developed like as Cu electroplating method, molten solder insert method and Ti/W deposition method. In this paper, various TSV filling methods were introduced and each filling materials were discussed.
비트 플레인 정합에 의한 움직임 추정기의 VLSI 설계
고영기,오형철,고성제,Go, Yeong-Gi,O, Hyeong-Cheol,Go, Seong-Je 대한전자공학회 2001 電子工學會論文誌-SP (Signal processing) Vol.42 No.3
Full-search algorithm requires large amount of computation which causes time delay or very complex hardware architecture for real time implementation. In this paper, we propose a fast motion estimator based on bit-plane matching, which reduce the computational complexity and the hardware cost. In the proposed motion estimator, the conventional motion estimation algorithms are applied to the binary images directly extracted from the video sequence. Furthermore, in the proposed VLSI motion estimator, we employ a Pair of processing cores that calculate the motion vector continuously By controlling the data flow in a systolic fashion using the internal shift registers in the processing cores, we avoid using SRAM (local memory) so that we remove the time overhead for accessing the local memory and adopt lower-cost fabrication technology. We modeled and tested the proposed motion estimator in VHDL, and then synthesized the whole system which has been integrated in a 0.6-$\mu$m triple-metal CMOS chip of size 8.15 X 10.84$\textrm{mm}^2$. 전역탐색알고리즘(full-search algorithm, FSA)은 탐색영역의 범위가 커짐에 따라 방대한 양의 계산을 필요로 하기 때문에 이에 따른 알고리듬의 처리시간이 커지고, 하드웨어로 구현했을 때 회로가 복잡해진다는 문제점을 안고 있다. 본 논문에서는 이러한 문제점을 개선하기 위한 방안으로 비트플레인 정합에 의한 움직임 추정기의 VLSI 구조를 제안한다. 제안된 움직임 추정기에서는 비트 플레인 정합기준을 이용하여 기존의 전역 탐색 알고리즘을 하나의 이진영상으로 적용함으로써 움직임 추정에 소요되는 연산의 양을 크게 줄이면 서도 전역탐색 알고리듬과 유사한 움직임 추정 성능을 갖도록 하였으며, 제안된 VLSI 구조에서는 두 개의 프로세싱 코어를 채택하여 데이터 흐름을 시스톨릭 (systolic) 어레이의 형태로 제어하여, 시스템 내부의 SRAM을 제거하여 동작 속도 상의 이득뿐만 아니라, 메모리 공정을 필요로 하지 않는 저가의 공정을 사용 가능하게 함으로써 제작상의 비용을 절감할 수 있는 해결책을 제시하였다. 구현된 하드웨어는 VHDL을 이용하여 설계하고, 기능 검증을 수행한 후 0.6-μm three-metal CMOS 공정을 이용하여 8.15 X 10.84㎟의 크기로 집적하였다.
MPEG-2 비디오 부호화기의 프레임 메모리 하드웨어 구현
고영기,강의성,이경훈,고성제 한국통신학회 1999 韓國通信學會論文誌 Vol.24 No.9
본 논문에서는 MPEG-2 비디오 부호화기에서의 프레임 메모리 하드웨어 구현을 위한 DRAM의 효율적인 메모리 맵과 이에 따른 하드웨어 구조를 제안한다. 논문에서 제시된 메모리 맵은 DRAM 사용 시간과 대역폭을 줄임으로써 시스템의 성능을 개선할 수 있도록 설정되었고, 개발된 하드웨어는 MPEG-2 비디오 부호화기에 구성된 타모듈과 인터페이스를 위해 하드웨어는 VHDL을 이용하여 구현하였으며, $0.5\mu\textrm{m}$, VTI, ASIC 라이브러리인 camn5a3을 이용하여 합성하였다. 개발된 하드웨어에 대한 RT (register transfer) 수준 및 게이트 수준의 검증을 위해 VHDL 시뮬레이터와 로직 합성 툴을 사용하였고, 추후 성능 개선과 기능 검증을 위해서 하드웨어 에뮬레이터를 개발하였다. 구현된 하드웨어 MPEG-2의 MP@ML에서 요구하는 전송률로 데이터를 채널에 전송할 수 있도록 하였다. In this paper, we present an efficient hardware architecture for the frame memory of the MPEG-2 video encoder. Both the total size of internal buffers and the number of logic gates are reduced by the proposed memory map which can provide an effective interface between MPEG-2 video encoder and the external DRAM. Furthermore, the proposed scheme can reduce the DRAM access time. To realize the frame memory hardware,$0.5\mu\textrm{m}$, VTI, vemn5a3 standard cell library is used. VHDL simulator and logic synthesis tool are used for hardware design and RTL (register transfer level) function verification. The frame memory hardware emulator of the proposed architecture is designed for gate-level function verification. It is expected that the proposed frame memory hardware using VHDL can achieve suitable performance for MPEG-2 MP@ML.