http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
재생 폴리에틸렌/비산회 분말 충전 복합체 제조와 기계적 물성, 내마모성 및 저속균열성장 저항성에 관한 연구
계형산 ( Hyoung San Kye ),신경철 ( Kyung Chul Shin ) 한국고무학회 2011 엘라스토머 및 콤포지트 Vol.46 No.4
비산회를 첨가한 폐 PE의 직접적인 재활용 및 용도 개발을 위하여 재생 폴리에틸렌 수지와 순수 HDPE를 기본으로 비산회(fly ash)와 블렌드하여 비산회/재생 PE 복합재료를 치합형 동방향 회전 이축 압출기(fully intermeshing co-rotating twin screw extruder)를 이용하여 각 조성별로 제조하였다. 본 연구에서는 플라스틱 수지(재생 PE, HDPE)와 비산회의 혼합비를 (0~40) wt.%로 하였고 비산회의 함량 변화에 따른 물성을 비교하였다. 세 종류의 PE 모두 비산회 함량이 증가할수록 항복인장강도가 감소하고, 파단신율이 감소한다. 내마모성 시험 결과는 사포 거칠기가 증가할수록 내마모성이 떨어지고 거칠기가 감소할수록 충전제의 함량에 따라 내마모성이 증가한다. Notched Constant Ligament Stress 시험에서는 신재 PE와 재생 PE의 경우 하중의 변화에 따라 파괴 시간이 짧아지는 결과를 나타냈고, 비산회가 혼합된 KRPE 복합체는 신재 PE, 폐 PE 그리고 신재 PE 복합체 및 JRPE 복합체와 비교할 때 상대적인 파괴 시간은 짧게 나타나지만 매설용 구조물에 대한 한국산업표준에서 정하는 20% 노치 깊이, 15%의 하중에서 24시간 이상의 저속 균열저항성을 나타내어 지하매설용 구조체로서 하수 이음관/받침대와 옥외구조물로서 가로수 보호의자와 같은 구조물에 적용할 수 있을 것으로 판단한다. The virgin and recycled polyethylene composites with various ratio of fly ash were manufactured by using a fully intermeshing co-rotating twin screw extruder for the reuse of fly ash from power plant and post-consumed polyethylene. Fly ash were blended with virgin HDPE and recycled polyethylene at the weight fraction of 0 to 40 wt.%. Mechanical properties such as yield strength, abrasion resistance, and slow crack resistance were measured with ISO and ASTM standards. The experimental results for the various composites showed that the elongation at break and the yield stress of the composites decreased with increasing fly ash contents. Generally, the abrasion resistance of PEs decreased with increasing sandpaper grits but the abrasion resistance of the composites increased with fly ash content at finer abrasive surface. The slow crack growth resistance of virgin HDPE, recycled JRPE and the JRPE composite showed higher slow crack growth resistance up to 50% of load at notch depth of 20% and 30%, but KRPE and the KRPE composite showed much lower resistance than virgin HDPE, JRPE and the JRPE composite. Time to break, measured with NCLS test method, of all PEs and the composites satisfies the regulation of Korean Industrial Specification for sewer pipe and support application.
Lauryl lactam - EPDM 의 연속 중합 및 In-Situ 블렌드
계형산 (Hyoung San Kye) 한국고무학회 1998 엘라스토머 및 콤포지트 Vol.33 No.4
N/A One-step continuous reactive blend with EPDM is investigated using a modular intermeshing corotating twin screw extruder. This was performed via anionic polymerization mechanism. Mechanical properties were characterized and compared with mechanical blends.
이축 압출기를 이용하여 제조된 PMMA/MWNT 복합체의 특성 분석
우종석 ( Jong Seok Woo ),방대석 ( Dae Suk Bang ),이건웅 ( Geon Woong Lee ),계형산 ( Hyoung San Kye ),신경철 ( Kyung Chul Shin ) 한국고무학회 2007 엘라스토머 및 콤포지트 Vol.42 No.3
최근 들어 전기적, 기계적 성질이 우수한 다중벽탄소나노튜브(Multi-Walled Carbon Nanotubes)/고분자 복합재료에 대한 연구가 활발히 진행 중이다. 본 연구에서는 모듈라 치합형 동방형 회전 이축 압출기(Modular Intermeshing Co-Rotating Twin Screw Extruder, L/D=42)를 이용하여 PMMA/MWNT 복합체를 제조하였다. 이렇게 제조된 PMMA/MWNT 복합체의 표면저항을 측정한 결과 MWNT의 함량이 4 wt% 일 때 104 Ω/sq를 나타내어 전자파차폐(Electronic Magnetic Interference) 물질로 응용할 수 있는 가능성을 확인 하였다. 그리고 열중량 분석기 (Thermogravimetric Analysis), 시차주사열량계(Differential Scanning Calorimeter)를 이용한 열적 특성, 주사전자현미경(Scanning Electron Microscopy)을 통하여 형태학적 변화를 분석하였다. 또한 유변학적 특성을 알아보기 위해 용융흐름지수(Melt Flow Index)를 측정하였다. MWNTs have been widely investigated due to unique properties of such as good electrical conductivity and thermal stability in polymer composites industries. This paper established the procedure to fabricate PMMA/MWNT composites by a modular intermeshing co-rotating twin screw extruder with L/D ratio of 42. The electrical properties of PMMA/MWNT composites with different content of MWNT have been investigated. A sheet resistance percolation was observed at 4 wt% of MWNT for the melt processed composites. Sheet resistance of PMMA/MWNT composite film containing 4 wt% of MWNT was nearby 104 Ω/sq and this shows the possibility of potential application to EMI (Electronic Magnetic Interference) shielding materials. The characteristics of composites were analyzed by TGA, DSC, and SEM. In addition, MFI (Melt Flow Index) has been measured to analyze the rheological property.