http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Gd<sub>2</sub>O<sub>3</sub> 첨가에 따른 AC PDP 보호막용 MgO 박막의 광학적.전기적 특성
김창일,임은경,박용준,이영진,백종후,최은하,정석,김정석,Kim, Chang-Il,Lim, Eun-Kyeong,Park, Young-Jun,Lee, Young-Jin,Paik, Jong-Hoo,Choi, Eun-Ha,Juang, Seok,Kim, Jeong-Seok 한국전기전자재료학회 2007 전기전자재료학회논문지 Vol.20 No.7
The effects of $Gd_2O_3$ addition and sintering condition on optical and electrical properties of MgO films as a protective layer for AC plasma display panels were investigated. Doped MgO films prepared by the e-beam evaporation have a higher ${\Upsilon}$ (secondary electron emission coefficient) than pure MgO protective layer. Relative density and grain size increased with amount of $Gd_2O_3$ up to 100 ppm and then decreased further addition. These results showed that discharge properties and optical properties of MgO protective layers seemed to be closely related with microstructure factors such as relative density and grain size. Good optical and electrical properties of ${\Upsilon}$ of 0.138, surface roughness of 5.77 nm and optical transmittance of 95.76 % were obtained for the MgO+100 ppm $Gd_2O_3$ protective layer sintered at $1700^{\circ}C$ for 5 hrs.
바이몰프형 압전세라믹 캔틸레버를 이용한 수력에너지 하베스터 모듈 제작 및 발전 특성
김경범,김창일,윤지선,정영훈,남중희,조정호,백종후,남산,성태현,Kim, Kyoung-Bum,Kim, Chang-Il,Yun, Ji-Sun,Jeong, Young Hun,Nahm, Jung Hee,Cho, Jeong-Ho,Paik, Jong-Hoo,Nahm, Sahn,Seong, Tae-Hyeon 한국전기전자재료학회 2012 전기전자재료학회논문지 Vol.25 No.12
A new water energy harvester module, which is composed of piezoelectric bimorph cantilevers, harvesting circuit and a shaft with 16 impellers at a center axis, was fabricated for energy harvesting application. High energy density $Pb(Zr_{0.54}Ti_{0.46})O_3$ + 0.2 wt% $Cr_2O_3$ + 1.0 wt% $Nb_2O_5$ (PZT-CN) thick film obtained by tape casting method was used for the bimorph cantilever. The PZT-CN bimorph cantilever with a proof mass of 49 g exhibited extremely high output power of 22.5 mW (24 $mW//cm^3$) at resonance frequency of 11 Hz. In addition, the fabricated water energy harvester has a cylindrical structure with 48 bimorph cantilevers clamped at inner surface. A significantly high output power of 433 mW was obtained at a rotation speed of 120 rpm with a resistive load of $500{\Omega}$ for the water energy harvester.
Cl$_2$ 유도결합 플라즈마를 이용한 SBT 박막의 식각특성
김동표,김창일,Kim, Dong-Pyo,Kim, Chang-Il 대한전기학회 2001 전기학회논문지C Vol.49 No.5
SBT thin films were etched at different content of $Cl_2$ in $Cl_2$/Ar or $Cl_2/N_2$(80%). As $Cl_2$ gas increased in $Cl_2$/Ar or $Cl_2/N_2$ gas plasma. the etch rate decreased. The result indicates that physical puttering of charged particles is dominant to chemical reaction in etching SBT thin films. To evaluate the etching mechanism of SBT thin films, x-ray photoelectron to chemical reaction in etching SBT thin films. To evaluate the etching mechanism of SBT thin films, x-ray photoelectron spectroscopy (XPS), secondary ion mass spectrometry (SIMS) and atomic force microscopy (AFM) were carried out. From the result of AFM, the rms values of etched samples in Ar only or $Cl_2$ only plasma were higher than that of as-deposited, $Cl_2$/Ar and $Cl_2/N_2$ plasma. This can be illustrated by a decrease of Bi content of nonvolatile etching products (Sr-Cl and Ta-Cl), which are revealed by XPS and SIMS.
김창일,김태형,장의구 한국전기전자재료학회 1995 電氣電子材料學會誌 Vol.8 No.6
Process optimization experiments based on the Taguchi method were performed in order to set up the optimal process conditions for the contact oxide etching process module which was built in order to be attached to the cluster system of multi-processing purpose. In order to compare with Taguchi method, the contact oxide etching process carried out with different process parameters(CHF$_{3}$/CF$_{4}$ gas flow rate, chamber pressure, RF power and magnetic field intensity). Optimal etching characteristics were evaluated in terms of etch rate, selectivity, uniformity and etched profile. In this paper, as a final analysis of experimental results the optimal etching characteristics were obtained at the process conditions of CHF3/CF4 gas flow rate = 72/8 sccm, chamber pressure = 50 mTorr, RF power = 500 watts, and magnetic field intensity = 90 gauss.
NORMAL FUZZY PROBABILITY FOR TRAPEZOIDAL FUZZY SETS
김창일,윤용식 영남수학회 2013 East Asian mathematical journal Vol.29 No.3
A fuzzy set A de ned on a probability space (\omega, F, P) is called a fuzzy event. Zadeh de nes the probability of the fuzzy event A using the probability P. We de ne the normal fuzzy probability on R using the normal distribution. We calculate the normal fuzzy probability for generalized trapezoidal fuzzy sets and give some examples.
압전 캔틸레버 구조를 이용한 도로용 에너지 하베스터의 개발 및 평가
김창일,김경범,전종학,정영훈,조정호,백종후,강인석,이무용,최범진,조영봉,박신서,남산,이영진,Kim, Chang-Il,Kim, Kyung-Bum,Jeon, Jong-Hac,Jeong, Young-Hun,Cho, Jeong-Ho,Paik, Jong-Hoo,Kang, In-Seok,Lee, Moo-Yong,Choi, Beom-Jin,Cho, Young-Bong 한국전기전자재료학회 2012 전기전자재료학회논문지 Vol.25 No.7
A road energy harvester was designed and fabricated to convert mechanical energy from the vehicle load to electrical energy. The road energy harvester is composed of 24 piezoelectric cantilevers and a vehicle load transfer mechanism. Applying a vehicle load transfer mechanism rather than directly installing energy harvesters under roads decreases the area of road construction and allows more energy harvesters to be installed on the side of the road. The power generation amount with respect to the vehicular velocity change was assessed by installing the vehicle load transfer mechanism and the energy harvester in the form of speed bumps and underground. The energy harvester installed in a speed bump form generated power of 7.61 mW at the vehicular velocity of 20 km/h. Also, power generation of the energy harvester installed in the underground form was 63.9 mW at the vehicular velocity of 28 km/h. Although the number of piezoelectric cantilevers was reduced by 1/3 to 24 in comparison to the previous research results with 72 piezoelectric cantilevers, similar power generation characteristic value was obtained within the vehicular velocity of 20 km/h by altering the vehicle load transfer mechanism and cantilever vibration method.