http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
조진래,하대율,Jo, Jin-Rae,Ha, Dae-Yul 대한기계학회 2001 大韓機械學會論文集A Vol.25 No.6
Functionally graded materials(FGMs) are highlighted to be suitable for high temperature engineering due to their continuous distribution of material properties. In this paper, an optimal design is executed for determining the optimal material volume distribution pattern that minimizes the steady-state thermal stress of FGM heat-resisting composites. The interior penalty function method and the golden section method are employed as optimization techniques while the finite element method is used for thermal stress analysis. Through numerical simulations we suggest the volume fraction distributions that considerably improve initial thermal stress distributions.
조진래,정현성,이홍우,김남전,김기운,Jo, Jin-Rae,Jeong, Hyeon-Seong,Lee, Hong-U,Kim, Nam-Jeon,Kim, Gi-Un 대한기계학회 2001 大韓機械學會論文集A Vol.25 No.10
Automobile maneuverability and tire durability are significantly influenced by the sidewall tire contour. In order to improve these tire performances, it is very important far one to determine a sidewall contour producing the ideal tension and strain-energy distributions. However, these requirements can nut be simultaneously achieved by conventional non-interactive multi-objective optimization methods based on mathematical programming, because these exhibit the conflicting behavior each other, with respect lo the sidewall contour. Therefore, we execute the tire contour optimization fur improving the maneuverability and the tire durability using satisficing trade-off method.
경계층을 가진 박판구조물의 유한요소 해석을 위한 체눈 디자인
조진래 한국전산구조공학회 1996 한국전산구조공학회논문집 Vol.9 No.4
들보나 아치, 판재 그리고 쉘과 같은 박판구조물의 경계부근의 매우 좁은 영역에는 경계층이 존재하는데, 이 영역에서 해는 급격하게 변화하는 특이 거동을 나타낸다. 유한요소법을 이용하여 이러한 물체의 거동을 해석하는 경우, 이런 특이성을 묘사하기 위해 유한요소 체눈패턴이 대단히 중요한 역할을 한다. 이 논문은 경계층에 대한 이론적 해석과 최적의 체눈패턴을 형성하기 위한 가이드를 제시한다. 또한 이론적인 결과를 입증하는 예제도 소개하고자 한다. For thin elastic structures such as beams, arches, plates and shells, there may exist the boundary layer in the narrow thin region neighborhood of boundaries, where the solution displays the singular behavior exponentially decaying in the normal direction to the boundary. In the finite element analysis of these structures, finite element mesh patterns have a significant role to capture this singularity. This paper introduces the analytic study of this problem and provides a guideline to construct optimal mesh patterns together with numerical experiments.
얇은 탄성 구조물을 위한 계층적 모델에서의 후 록킹인식
조진래 한국전산구조공학회 1996 한국전산구조공학회논문집 Vol.9 No.4
전통적인 유한요소법을 이용하여 얇은 탄성 구조물을 해석하는 경우, 전단 및 막 록킹에 의하여 해석결과의 품질이 저하될 수 있다. 더욱이 수치결과의 록킹방생 여부를 다른 참고할 만한 자료와 비교하지 않고 감지한다는 것은 그다지 쉽지 않다. 본 논문은 록킹에 대한 이론적 해석과 더불어 후 록킹인식을 위한 신뢰성이 있는 한가지 간단한 방법을 소개하고자 한다. 또한 이론적인 결과를 입증하기 위한 수치결과도 주어져 있다. In the analysis of thin elastic structures such as beam-, arch-, plate- and shell-like bodies using standard finite element schemes, there may occur deterioration of approximation quality owing to shear and membrane lockings. Moreover, a recognition of this phenomenon in the computed numerical results is not easy without comparing with other available reference numerical data. This paper analyses briefly this phenomenon and introduces one inexpensive but reliable a posteriori locking detection method. Numerical examples are given supporting the theoretical results.
조진래,신성우,정현성,김남전,김기운,Cho, Jin-Rae,Shin, Sung-Woo,Jeong, Hyun-Sung,Kim, Nam-Jeon,Kim, Kee-Woon 대한기계학회 2002 大韓機械學會論文集A Vol.26 No.10
Contacting with ground in the post-card area size only, tire supports entire automobile weight. As well, it characterizes most of automobile running performance. Among the design parameters, the carcass contour becomes a key design factor. This paper deals with the time-effective optimal design of tire crown contour in order to improve the tire wear performance by employing a back-propagation neural network model.
Sidewall 반경변화에 따른 Carcass 장력분포 변동 추이에 관한 유한요소 해석
조진래,정현성,이홍우,김남전,김기운,Jo, Jin-Rae,Jeong, Hyeon-Seong,Lee, Hong-U,Kim, Nam-Jeon,Kim, Gi-Un 대한기계학회 2001 大韓機械學會論文集A Vol.25 No.6
Tire performance is significantly influenced by the carcass tension distribution that is governed by the sidewall contour. To maximize the tire performance, it is very important for one to find the sidewall contour with the ideal tension distribution. But it is not easy to find such an optimal sidewall contour. Therefore, in order for a successful tire-shape optimization, we need to investigate how the change of sidewall radius influences on the carcass tension distribution. In this paper, we intend to numerically investigate the relation between the sidewall-radius change and the carcass tension distribution.
조진래,홍상일,김민정 한국전산구조공학회 2003 한국전산구조공학회논문집 Vol.16 No.1
비행체의 선회운동 시 액체연료 저장탱크의 동응답을 ALE(arbitrary Lagrangian-Eulerian) 유한요소법을 이용하여 해석하였다. 연료탱크는 선회운동 시 내부 연료의 관성력에 의해 상당한 양의 충격하중을 받게 된다. 또한 이로 인해 유발된 큰 동 하중과 모멘트는 구조물의 안정성과 제어시스템에 영향을 미친다. 본 논문에서는 내부연료의 동적 영향력을 억제하기 위하여 링형배플을 채용하였다. 배플개수와 배플위치에 따른 연료탱크의 파라메트릭 해석을 통하여 연료탱크의 동응답 특성에 미치는 배플의 영향을 분석하였다. 유체와 구조물 사이의 연계는 ALE 유한요소법을 통하여 정확하고 효과적으로 처리되었다. Dynamic response of baffled fuel-storage tank in turnaround motion is simulated using the ALE finite element method. Fuel-storage tank undergoes abrupt impact load caused by inertia force of internal fuel in turnaround motion. Also, large dynamic force and moment caused by this load influence structural stability and control system. In this paper, ring-type baffles are adopted to suppress the dynamic influence. Through the parametric analysis with respect to the baffle number and location, the effects of baffle on the dynamic response of baffled fuel-storage tank is analyzed. The ALE finite element method is adopted for the accurate and effective simulation of the hydrodynamic interaction between fluid and structure.
조진래,이홍우,Cho, Jin-Rae,Lee , Hong-Woo 한국전산구조공학회 2005 한국전산구조공학회논문집 Vol.18 No.2
본 논문에서는 수치적분 정도를 향상시킬 수 있는 새로운 무요소 기법을 제안한파 저자들에 의해 페트로프-갤러킨 자연요소법(PG-NEM)이라 명명된 이 새로운 기법은 보로노이 다이어그램과 델라우니 삼각화에 기반을 두고 있으며, 이는 BG-NEM이라 불리는 기존의 자연요소법과 개념적으로 동일하다. 하지만, 동일한 시험 형상함수와 시도 형상함수를 선택하는 BG-NEM과는 달리, PG-NEM에서는 지지영역이 적분을 위한 배경격자에 정확하게 일치하도록 시험 형상함수를 독립적으로 선택하는 페트로프-갤러킨 개념에 기반을 두고 있다. 따라서, 제안된 기법은 BG-NEM과 비교하여 수치적분 정도를 현저히 향상시킬 것으로 기대된다. In this paper, a new meshfree technique which improves the numerical integration accuracy is introduced. This new method called thc Petrov-Galerkin natural clement method(PG-NEM) by authors is based on the Voronoi diagram and the Delaunay triangulation which is based on the same concept used lot conventional natural clement method called the Bubnov-Galerkin natural element method(BG-NEM). But, unlike the BG-NEM, the test basis function is differently chosen, based on the concept of Petrov-Galerkin, such that its support coincides exactly with a regular integration region in background mesh. Therefore, it is expected that the proposed technique ensures the remarkably improved numerical integration accuracy in comparison with the BG-NEM.