http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
'관계'의 개념에 의한 현대 미술관의 공간 프로그램과 디자인 특성을 적용한 공간디자인
홍준기 건국대학교 건축전문대학원 2020 국내석사
오늘날 우리가 사는 이 시대는 점점 복잡 다양해지고 많은 문제들이 서로 얽혀 있어 사회 전체를 온전히 파악하는 것은 불가능하다. 따라서 현실 자체가 너무 풍부하고 계속 변하기 때문에 옳고 그름을 정하는 것이 아니라 우리는 다양한 가치와 아름다움에 주의를 기울여야 한다. 이러한 시대적 변화는 현대예술에도 커다란 영향을 미쳤으며, 다양한 문화의 접촉과 이념의 변화, 새로운 기술의 발달 등으로 새로운 장르의 예술작품들이 생겨나고 있다. 예전에는 뛰어난 손재주로 아름다운 작품을 만들어내는 것이 작가였다면, 오늘날에는 사람들을 작품에 참여하게 함으로써 그 사이에서 의미를 창출하여 '관계'를 맺게 하는 것이 중요한 의미를 가진다. 이러한 현대예술의 확장은 어디까지가 예술의 영역이고 일상의 영역인지 구분이 모호해지고, 더 나아가 작가와 관람자, 작품과 공간의 영역을 넘나들며 공유관계를 형성해가고 있다. 이처럼 예술의 내용과 형태가 변화함에 따라 필연적으로 미술관이라는 영역에서 벗어나 전시하는 작품들이 생겨나고, 예술을 담는 공간은 열린 장소로 확장된다. 또한 과거 작품에 대한 해석의 문제는 전문적인 지식을 갖춘 미술가나 비평가 등에 의해 정의되어 왔으나 현재는 작품을 직접 보고 느끼는 관람자에 의해 다양하게 정의된다. 이러한 예술작품의 변화는 일상과 이웃과 관계를 맺는 방식으로 진전되었으며, 이는 사람들 사이의 관계, 사회적 교류 안에서 작품을 전개한다. 따라서 예술작품을 전시하는 미술관의 공간 프로그램 형성과정에 영향을 끼치며 미술관의 공간 변화가 일어난다. 이에 현대 미술관을 사람중심으로 삶과 상호 밀접한 관계를 가진 열린 장소이자 새로운 문화를 창출하는 장으로 인식하고 작가-작품-관람자의 ‘관계’에 주목하고자 하였다. 따라서 본 논문은 미술관의 성립 배경 과 기능의 변화과정 고찰하여 현대 미술관의 개념과 공간 프로그램의 변화를 살펴보았고, ‘관계’의 개념에 대한 다양한 관점을 통해 그 의미와 변화를 살펴보고 현대미술관에서 나타나는 작가-작품-관람자의 관계를 현대작가의 작품을 통해 분석하였으며 그 결과 다음과 같은 특성을 3가지 도출할 수 있었다. 첫째, 주체성을 지닌 사용자로 다수의 대상, 즉 타자와의 만남을 통해 관람자는 감각적 경험을 하게 되고 새로운 관계를 형성한다. 따라서 오감을 자극하는 공간의 분위기와 재료의 물성은 관람자의 감각을 이끌어내는 중요한 수단이다. 둘째, 미확정적인 프로그램은 불특정 다수 관람자의 요구와 예측불가능성을 담고 있는 공간으로 관람자의 다양한 행위를 수용할 수 있는 다양한 기능들의 관계설정이다. 마지막으로 시간성에 따른 움직임은 관람자가 이동하는 과정 중에 경험하게 되는 체험이며, 이는 시간과 장면 프레임의 연속적인 공간의 흐름을 만들어 낸다. 이와 같은 내용을 토대로 작품의 다양한 구성을 통한 상호관계적인 특징이 드러나는 박서보 작가의 작품세계를 공간적으로 구현하기 위한 박서보 아트 뮤지엄의 공간디자인을 제안하였다. 본 연구에서는 ‘사람’을 위한 공간으로 변화하고 있는 현대 미술관의 흐름과 방향성을 모색하였으며, 앞으로도 현대사회에서 일어나고 있는 다양한 흐름을 반영한 현대 미술관에 대한 연구가 지속되길 바란다. In this age where we are living today, it becomes more complex and varied and many problems are interwined and so it is impossible to understand the entire society completely. Therefore, the reality itself is too plentiful and constantly changes, we have to pay attention to various values and beauty rather than setting what is right and what is wrong. This situation had a huge impact on modern art, and contact with different cultures and changes of ideology and development of new technology generated new genres of artistic work. Someone who made a beautiful work with good dexterity was an author in the past, whereas in the present, encouraging people to participate in making a work and creating a meaning from it and making them to have a 'relation' carries an important meaning. Such expansion of modern art obscures the distinction of the territory of art from that of everyday life and going further, forms a shared relationship across the areas of author and viewer and work and space. Like this, with the changing content and shape of art, the works that are exhibited inevitably beyond the area of art museum are emerging, and the space containing art expands to an open space. Also the interpretation of the past works has been defined by artist or critic with professional knowledge, but now defined in various ways by the viewer who sees a work and feels from it. Such changes of artistic work have developed in a way of having a relationship with everyday life and neighbors. This unfolds a work within the relationship among people and social exchanges. Therefore, it has an impact on art museum’s space program formation process exhibiting artistic works and the space changes in art museum are happening. Accordingly this study aims to see modern museum as a venue for creating new cultures by viewer, author and works together as a open place having a close relationship with life and focus on ‘relation’ between author-work-viewer that is formed centering on humans. Therefore, this study looked at the changes in modern museum’s concept and space program by considering the background and function of art museum and looked at the meaning and changes of ‘relation’ concept through various perspectives and analyzed the relation of author-work-viewer appearing in modern museum through contemporary authors’ works, and as a result, the following three characteristics could be drawn. First, viewers have sensory experience and form a new relationship through meeting with others, that is, multiple others as users with independence. Therefore, the atmosphere of the space exciting senses and the physical property of material are important means for eliciting viewers’ senses. Second, indefinite program sets a relation of various functions that can accept viewer’s various acts as space containing many and unspecified viewers’ needs and unpredictability. Finally, the movement that depends on temporality is experience of viewer in the process of movement and this makes a continuous spatial flow of time and scene frames. Based on the contents above, this study proposed Park Seo-bo Art Museum’s space design to realize the author Park Seo-bo’s world of art where interrelational characteristics are shown through diverse composition of works spacially. This study tried to seek the flow and direction of modern museum that was changing as space for ‘humans’ and it is hoped that further studies on modern museum reflecting diverse flows happening in the modern society can continue.
브랜드디자인 선호도 측정을 위한 도구 개발 연구 : 자동차 브랜드이미지 중심으로
브랜드의 중요성과 디자인의 관계성이 중요하다는 사실은 국내외 많은 학자들은 물론 기관이나 논문에서 밝혀져 왔다. 해마다 여러 나라에서는 브랜드 평가가 시행되고 있으며, 국내의 여러 기관에서는 브랜드 자산평가나 순위 등이 집계되어 꾸준히 발표되고 있는 실정이다. 일반적으로 브랜드에 대한 정의는 브랜드디자인을 포함하고 있으나, 브랜드 자산평가 등에서의 디자인 평가는 단순하게 이루어지거나, 아예 제외되는 경우가 많다. 디자인 학문의 특성상 정량적 수치로 계산하기에는 어려움이 따르지만, 정량적 수치에 익숙한 환경과 사회적 현상들을 감안한다면 브랜드디자인에 대한 가치를 계량화할 필요성이 높다. 이에 본 연구는 브랜드디자인의 우월성을 평가하기 위한 도구 개발을 목적으로 하고 있다. 연구범위는 국가와 세계경제에 미래 산업 가치로서 큰 영향을 주고 있는 자동차 브랜드이며 국내 자동차 시장으로 한정지었다. 사전 연구를 통해 우리나라 소비자의 경우 자국산(自國産)의 구매 비율이 월등히 높다는 것을 알 수 있었으므로, 공식 수입되는 해외 브랜드 중 판매순위 10위까지의 브랜드를 객관적 설문조사를 통해 선정하였다. 연구방법은 관련 학문분야에서 사용되는 방식을 인용하였으나, 디자인 평가 관련 연구에서는 대부분 정량적인 방법과 정성적인 방법을 혼용하여 사용하고 있음을 알 수 있었다. 사전 선행조사를 실시하여 브랜드디자인 요소들 중 브랜드를 잘 연상하는 요소가 무엇인지를 고찰해보았다. 조사를 통해 해당 브랜드 제품의 외형 디자인과 브랜드마크의 재인율이 높았으며, 특히 브랜드마크가 가장 높은 것으로 나타났다. 이는 제품의 디자인, 광고 등은 시기에 따라 다양하게 변화하였지만, 브랜드마크의 경우 상대적으로 변화의 폭이 적었음을 시사해준다. 따라서 본 연구에서는 브랜드디자인의 선호도를 측정할 때 브랜드마크를 브랜드이미지 연상으로서 보조하고자 하였으며, 브랜드마크의 대표성에 대한 이론적 근거는 Thorstien Veblen의 논문 및 선행연구를 통해 초석을 다지고자 하였다. 주요 연구는 관계자와의 심층인터뷰와 선행연구 고찰을 통한 가설 설정, 이를 검증하는 설문조사와 요인분석의 방법으로 연구를 진행하였으며, 브랜드이미지 조사를 위하여 의미분별법(Semantic Differential Scaling)을 5점 척도로 측정하였다. 연구의 내용은 선행 연구를 통해 브랜드디자인의 정의 및 브랜드이미지와의 관계성에 대해 고찰하였으며, 평가도구에 관한 가설을 설정하였다. 정량적인 결과의 도출을 위하여, 기존 KDPI의 공식을 응용한 BDPI(Brand Design Preference Index) 수식을 제안하였다. 자동차 제작업체 마케팅관계자와의 심층 인터뷰에서 특정 언론을 추천받았으며, 추천 받은 매체를 통해 6개월간의 자동차 관련 기사 1076개를 검토하여 총 129개의 형용사를 추출하였으며, 출현빈도가 높은 13개의 형용사를 최종 선정하였다. 또한 선행연구를 참조하여 13개의 형용사의 반의어를 선정 한 후 운전면허와 자동차 소유 경험자 중에서 자동차 동호회 회원 100명의 그룹과 대한민국 성인 일반인 그룹 100명에게 제 1연구를 실시하였다. 제 1연구 결과, 자동차 브랜드 이미지에 영향을 주는 주요요인의 수는 3가지이며, 이는 ‘고급스러운’ 느낌을 대표로 외형디자인 요인, ‘날렵한’ 느낌의 기술적 요인 그리고 ‘오래된’ 느낌의 역사성 요인으로 도출 되었다. 이를 근거로 가설에서 제시한 BDPI 수식을 설정하여 연구모형을 제시하였다. 제 2연구에서는 제 1연구와 같은 모집단에서 표본 수를 늘려 400여명을 대상으로 설문조사를 실시하였다. 표집방법은 가능한 유층별 표집방법을 따르고자 하였다. 제 2연구를 통해 제안된 BDPI 수식의 오류를 점검하고 브랜드디자인 선호도 도출을 위한 수식으로서 사용 가능 여부를 판단하였다. 제 2연구 결과, 수식을 이용한 브랜드디자인 선호도 지수(BDPI)를 도출 하였으며, 결과적으로 자동차 브랜드마크 선호도를 정량적으로 표현하고, 순위를 제시 할 수 있었다. 다만, 고찰을 통해 주요인이라고 예측된 시간적 속성인 ‘역사’는 다른 요인들에 비해 영향력이 미미하였다. 또한 브랜드마크의 선호도 순위와 실제 판매 순위가 다르게 나타난 것으로 보아, 이는 경제적 요인과 원산지 등의 요인이 주효했을 것으로 추측된다. 그러나 브랜드별 상위권 순위의 변동은 있었지만, 원산지에 따른 변화는 없음을 알 수 있었다. 연구의 핵심인 브랜드디자인 선호도 측정을 위한 도구의 방법은 다음과 같다. 첫째, 측정하고자 하는 브랜드의 품목 및 모집단과 시장 설정. 둘째, 관련 전문가와 심층인터뷰를 통한 객관적 언론매체 선정. 셋째, 선정된 매체의 일정기간에 나타난 형용사 어휘와 빈도수 수집. 넷째, 설문조사와 요인분석을 통한 브랜드 이미지의 주요 요인 도출. 다섯째, 도출된 주요요인의 수와 가중치를 BDPI수식에 대입, 해당 브랜드디자인의 선호도 값 출력. 여섯째, 브랜드의 순위 도출의 순으로 이루어졌다. 본 연구의 의미는 디자인 중심의 선호도 측정을 위한 방법과 수식을 도출하기 위한 시도였다는 점이다. 정성적 영역으로 분류하여 소비자의 주관에만 의지하는 디자인 연구에서도 정량적인 시도들이 이어지길 기대한다는 것이다. 연구의 결과를 이용한다면, 브랜드디자인의 선호도 지수를 계측하여 순위 측정이 가능하다. 아울러 일정기간을 주기로 지속적인 데이터의 축적이 이루어진다면 소비자 경향 분석과 자동차 제조업체의 브랜드이미지 개선 작업에 활용될 수 있을 것으로 기대된다. 또한 자동차 이외의 분야에서도 응용활용된다면, 더욱 다양한 산업에서도 적용되어 확산될 수 있을 것으로 사료된다.
홍준기 서강대학교 공공정책대학원 2003 국내석사
탈냉전 이후 국제정치환경은 공동안보 및 협력안보를 추구하는 경향이 증대되고 군비통제의 교섭양상도 군비통제의 필요성에 대한 폭넓은 공감대를 바탕으로 전 세계 거의 모든 국가들이 참여하는 다자적 군비통제의 형태로 확대되고 있으며, 그 통제의 대상도 핵무기를 포함한 대량살상무기의 통제는 물론 재래식 무기의 통제까지도 그 대상으로 하는 군비통제가 매우 활발하게 추진되고 있다. 그러나 이러한 국제정치환경이 남북한을 중심으로한 한반도에도 똑같이 적용되고 있는 것은 아니다. 물론 『남북정상회담』이후 공동선언에 대한 후속조치로 군사분야에서는 경의·동해선 철도 및 도로 연결공사 관련 군사보장합의서가 발효되어 현재 남북간 해당지역에서 공사가 진행되고 있으며 남북관리구역 설정, 지뢰제거 작업, 작업장 경비 및 안전보장, 직통전화 설치 등 초보적 단계의 신뢰구축 조치가 실천되고 있다. 이러한 긍정적인 여건과는 달리 국제정치환경의 변화에 부합된 북한의 핵무기를 포함한 대량살상무기와 재래식 무기의 통제는 거의 이루어지지 않고 있으며 특히, 북한의 핵무기 개발관련 내용은 현재 국내·외적으로 엄청난 충격으로 받아들여지고 있어 향후 한반도 평화체제 구축에 가장 큰 장애물이 되고 있다. 이러한 시대적 배경과 함께 한반도의 안보는 본질적으로 남북한 당사자 차원, 동북아 지역차원, 그리고 국제적 차원의 안보환경 등 3개의 환경이 함께 어우러지는 구조 속에서 방향이 결정되어 왔기 때문에 본 논문에서는 한반도 군비통제와 관련된 국내·외적인 환경들을 분석하여 우리 한반도 실정에 맞는 한반도 군비통제 추진방향을 제시하였다. 이에 대한 접근방식으로 유럽의 군비통제 성공사례와 국제 및 지역 군비통제 동향, 미군정∼현 국민의 정부까지의 한반도 군비통제 추진현황을 분석하여 그 교훈을 도출해 봄으로써 한반도의 국내·외적인 추진여건을 평가하여 한반도 군비통제 추진 시 나타나는 장애물을 효과적으로 극복하고 한 차원 더 발전된 군비통제 방안들이 구체화 될 수 있도록 실천 가능한 군비통제 방향을 다루어 보았다. 본 논문에서는 유럽의 군비통제 사례에 대한 협상과정을 중심으로 유럽지역에서의 군비통제가 성공할 수 있었던 배경 및 추진현황과 최근에 국제 및 지역차원에서 활발히 추진되고 있는 군비통제 현황과 노력에 대하여 정리해 보았으며 지금까지 진행되어온 남북한간 군비통제 추진현황 및 문제점에 대하여 분석하였다. 이 같은 한반도 주변 및 국내 군비통제 여건 속에서 우리가 추진해야 할 한반도 군비통제 추진 시 장애요소를 중심으로 그에 대한 극복대책을 제시하였다. 이제 남북한간의 각종 교류와 협력은 결코 퇴보되어져서는 안될 민족적인 사안이다. 남북한간에 진정한 교류와 협력을 달성하여 그 동안의 갈등과 반목에서 화해의 시대를 이룩한다면 지금까지 언급했던 군사적 신뢰구축 및 긴장완화는 더불어 이루어질 것이며, 우리 민족이 염원하는 한반도에서의 평화체제가 구축되어 통일된 국가로 탄생할 것이다. 그러기 위해서는 북한도 진정으로 변화된 모습을 우리에게 보여주어야 할 것이며 우리도 또한 국내 여론, 국제적인 여건, 북한의 태도를 종합적으로 고려하여 일관된 대북 정책을 추진해 나가야 한다. International politics has increasingly sought after joint security and cooperative security since the end of the cold war. Almost all countries unanimously agreed on negotiating for a multilateral system for arms control that pays particular attention to nuclear and conventional weapons. This trend, however, has not been similarly practiced in South Korea and North Korea although the two countries formed a joint declaration after the Summit Meeting. Consequently, North and South Korea created a military security agreement that promotes the construction of railways between Seoul and Sinuiju and along the east coast, as well as roads that connect the two. North and South Korea, therefore, rely on each other for security. The agreement led to the building of administrative zones, the elimination of land mines, and the implementation of stricter security measures in construction places. As a result, hot lines have been installed and guards have been stationed in these locations. Contrary to these changes, the inter-Korea arms control has rarely been applied to massive killing machines, like North Koreas nuclear and conventional weapons. Besides having a tremendous impact on South Korea and foreign countries, the development of these weapons will only hinder the creation of a peaceful system in the Korean peninsula. The peninsulas security has evolved into a frame that has three dimensions; namely, South and North Korea, Northeast Asia and the international scope. This thesis, therefore, aims to develop a more practical arms control system in the peninsula according to national and international surroundings. The thesiss development depends largely on the analysis of the arms control system in Europe and that of the peninsula from its liberation through the American military regime until the current government. As the peninsulas internal and external environs were being evaluated, more feasible arms control schemes that would effectively promote the system were studied. The thesis describes the background and the present status of the arms control system in Europe that focuses on the countrys negotiation process and its local and international efforts. In addition, it analyzes the current status and problems of inter-Korea arms control, with a recommendation on how to overcome obstacles to effective implementation. What North Korea and South Korea must do is to cooperate first in order for this to materialize. Once they have learned to reconcile, instead of antagonize each other, only then can tensions be minimized and military confidences be encouraged. If a peaceful accord could be formed between North and South Korea, only then can Koreans live in a unified nation. North Korea should show a truly changed face while South Korea must develop a more reliable policy for arms control in the light of national public opinions, international circumstances, and of course, North Korea's attitude.
유아의 체육 프로그램 참여가 기초운동능력에 미치는 영향
홍준기 수원대학교 교육대학원 2010 국내석사
This research focused on influence of physical program participation of infant to basic exercise ability, and it will provide basic materials about analysis and evaluation of exercise ability of the child. For achieving this purpose, exercise ability of participants, 30 boys, 30 girls, total 60 of H kindergarten children and I kindergarten of non physical education, is analyzed and researched. With material processing, two group of unisex basic exercise ability contain average and standard deviation of two group, which are related with clause of exercise ability. With using SAS 9.1 program, independent t-test is implemented because beforeㆍafter of application about physical program from test and comparison group should be evaluated. Through this research and process, Following results with influence of participation about physical program child to basic exercise ability are on the below. First, upper body curving (flexibility) shows difference about before․after of application about child physical program. Looking results specifically, flexibility of test group of boyㆍgirl is increasing. It is more improvements than that of comparison group. Second, making one-foot balancing (balance) shows difference before․after of application about child physical program. Looking results specifically, test group has more improvements than that of comparison group about balance. Third, standing long jump (quick reaction) does not show difference before․after of application about child physical program to both groups. Forth, Long chin-up bar hanging (muscle endurance) about before․after of application about child physical program shows difference. For muscle endurance of boys, test group has more improvements than that of comparison group. Fifth, 5m back and forth running (quickness) does not show difference about before․after of application about child physical program shows difference to both groups.
근로계약서를 위한 SPL 기반 실행 가능한 리카르디안 컨트랙트 생성 프레임워크
홍준기 전북대학교 일반대학원 2023 국내석사
A Ricardian Contract is a digital document that defines the terms and conditions of a contract for two or more contracting parties to act with each other. It is a contract that both humans and machines can read and can prove the fact of the contract and can also be used as legal evidence. However, as with existing contracts, it is only possible to prove the fact of the contract, but it is impossible to prove the enforcement of the contract, and there is a problem that each contract must be converted. We aim to enable contracts not only to prove facts but also to prove enforcement and increase reusability by providing various templates for electronic contracts. In this research, we propose an Executable Ricardian Contract Generation Framework based on SPL that utilizes a feature model to achieve the goal. Executable ricardian contracts can be generated through the framework, and automated contract execution and proof of enforcement in case of disputes are also possible through contracts. Also, users can use the framework to receive various contract templates and increase contract reusability. We applied it to the domain of the labor contract and proceeded with verification and evaluation by implementing a prototype. It was evaluated using the GQM method, and as a result of the experiment, 1,048,576 templates can be generated, and 6 out of 8 actually written contracts were generated identically. In addition, it has confirmed the possibility that it is possible to prove enforcement by using smart contracts. We look forward to kick-start digital contracts and reducing disputes through this approach.
Roux 함량을 달리한 supreme sauce의 물성 및 관능적 특성
Sensory test of five supreme sauces having different roux contents at 60℃ revealed that significant differences in color, flavor, texture, taste and overall preference were found at α = 0.01 level. The supreme sauce with 7.6% roux content was found to be the best in quality for the above sensory parameters. At 3 0℃, however, no significant differences were found in texture, taste and overall preference although color and flavor were found to be significantly different at α = 0.01 and 0.05 levels, respectively. All of the supreme sauces had the yield stress and thixotropy. These properties were fortified as the roux content in the sauce increased. Moreover, the properties were stronger in 30℃ than in 60℃. Yield stress is the rheological parameter related with the force to initiate fluid flow. In this sense, it could be an important parameter to affect the velocity of dispersion of supreme sauce on the meat. The optimum range of yield stress for supreme sauce was estimated to be 4.2-6.7 Pa. Consistency index and flow behavior index along with yield stress should be taken into account for the optimum texture of supreme sauce. 닭뼈를 이용하여 우리입맛에 맞는 소스를 개발하기 위하여 배합비를 달리하여 supreme sauce를 제조하고 관능검사와 기기분석을 통하여 이를 분석하고 난괴법및 Duncan의 다중비교를 통하여 Roux의 함량을 달리하여 제조한 5종류의 supreme sauce에 대하여 60℃에서 관능검사를 실시한 결과 색, 향, 조직감, 맛, 전체적인 기호도에서 1% 유의수준에서 유의성이 인정되었다. 모든 항목에서 roux 함량이 7.6%인 supreme sauce(S3)가 가장 우수한 것으로 나타났다. 반면에 30℃에서는 색은 1% 유의수준에서 향은 5% 유의수준에서 유의성이 인정되었으나 조직감, 맛, 전체적인 기호도에서는 유의차가 인정되지 않았다. Rheometer에 의한 측정결과 30℃와 60℃에서 5종의 supreme sauce 모두 항복응력과 thixotropy성이 있음이 확인되었고 roux의 함량이 증가함에 따라 항복응력과 thixotropy성은 증가함이 발견되었다. 이성질들은 60℃보다 30℃에서 더 높게 나타났다. 항복응력은 유체가 흐르기 위하여 가하여져야 하는 힘과 관련이 되는 인자로서 supreme sauce를 닭고기에 가하였을 때의 퍼져나가는 속도에 영향을 미치기 때문에 매우 중요하다. Supreme sauce의 항복응력의 최적치는 4.2-6.7Pa의 범위에 있을 것으로 추정되며 아울러 점조도지수와 유동성지수도 중요하게 다루어져야 할 변수라고 사료된다.
목 적: 적층 가공 기술의 발달과 제작 방식의 장점으로 인해 치과 영역에 3D 프린팅 기술의 적용 범위가 늘어가고 있다. 하지만 3D 프린팅과 기존의 방식으로 제작한 보철물의 여러 특성을 비교한 연구가 부족하다. 본 연구의 목적은 3D 프린팅 방식의 한 종류인 선택적 레이저 용융 (Selective Laser Melting; SLM) 방식으로 제작한 코발트–크롬 합금의 기계적인 성질과 세라믹과의 결합강도가 기존의 주조, 절삭가공 방식으로 제작한 합금과 차이가 있는지 알아보는 것이다. 재료 및 방법: 먼저 합금의 기계적인 성질을 측정하기 위해서 주괴(Star Loy C, Dentsply Sirona, Pennsylvania, USA)를 이용한 주조, 디스크(Starbond Co–Cr block, Scheftner dental alloys, Mainz, Germany)를 이용한 밀링, 파우더(SP2, EOS, Krailling, Germany)를 이용한 SLM 3가지 다른 방식으로 코발트–크롬 합금을 제작하였다. ISO 22674:2016 규격에 따라 34 × 13 × 1.5 mm 크기의 판 모양으로 시편을 제작했다. 각 그룹별로 12개의 시편을 준비해 3점 굽힘 실험을 통해 금속의 응력–변형 곡선을 그리고, 탄성계수, 항복강도, 굴곡강도를 계산했다. 또한, 금속–세라믹의 결합강도 측정을 위해 ISO 9693-1:2012 규격에 따라 시편을 똑같이 세 가지 방법으로 25 × 3 × 0.5 mm 크기로 제작하고, 그 위의 중앙 부위에 세라믹(Hera Ceram, Heraeus, Hanau, Germany)을 8 × 3 × 1.1 mm 크기로 올린 시편을 각 12개씩 제작했다. 이후에 3점 굽힘 실험을 통해 금속-세라믹 결합 강도(τb)를 측정했다. 실험 후 각 실험군 당 5개의 시편을 무작위로 추출해 시편 당 3개 부위에서 표면의 미세거칠기(Ra)를 측정하고, 세라믹이 탈락한 표면의 성분분석을 진행했다. 또한 주사전자현미경을 이용해 금속의 표면을 관찰했다. 통계적 분석은 각 실험 결과를 Levene's test를 통해 등분산 확인하고, 3가지의 다른 제작방법에 대하여 미세거칠기, 탄성계수, 항복강도, 굴곡강도, 결합강도, 금속 표면에 세라믹이 남아있는 비율을 종속변수로 일원 분산 분석 시행하고, Tukey's post-hoc test로 사후 검정했다 (α = 0.05). 결 과: 미세거칠기는 각 실험군 사이에 통계적인 차이는 없는 것으로 나타났다. (주조군 1.19 ± 0.58 μm, 밀링군 0.88 ± 0.46 μm, SLM군 1.10 ± 0.30 μm) 탄성계수는 주조군에서 더 크게 나타났다. (주조군 560.53 ± 21.53 GPa, 밀링군 473.55 ± 35.02 GPa, SLM군 464.55 ± 10.77 GPa) 항복강도와 (주조군 567.92 ± 35.53 MPa, 밀링군 323.86 ± 32.04 MPa, SLM군 591.18 ± 22.31 MPa) 굴곡강도는 (주조군 792.31 ± 81.64 MPa, 밀링군 494.16 ± 51.93 MPa, SLM군 849.48 ± 24.45 MPa) 밀링군에서 작게 나타났다. 금속의 파절면을 주사전자현미경으로 관찰한 결과, 주조군에서는 주조 후에 불균일하게 식으면서 생기는 특징적인 수지상 구조를 관찰할 수 있었고, 밀링군에서는 균일한 표면을 볼 수 있었다. SLM군에서는 나노크기의 결정구조를 볼 수 있었다. 밀링군에서는 파절면에서 물결무늬를 관찰할 수 있었고, SLM군에서는 계단면처럼 보이는 파절양상을 볼 수 있었다. 금속-세라믹 결합강도(τb)를 측정한 결과, 주조군이 높게 나왔다. (주조군 32.51 ± 2.68 MPa, 밀링군 26.98 ± 3.97 MPa, SLM군 29.07 ± 2.90 MPa) 하지만 ISO 규격에 따르면 세 군 모두 기준치를 만족하는 결과를 보였다. 세라믹이 탈락한 면을 보면 금속 표면에 세라믹이 남아있는 것을 관찰할 수 있었다. 성분분석(EDS) 결과 표면에서 규소가 검출된 비율이 밀링군, SLM군, 주조군의 순서로 나타났으며, (주조군 36.44 ± 6.37 %, 밀링군 57.10 ± 12.26 %, SLM군 49.50 ± 7.69 %) 모두 혼합된 탈락양상을 보였다. 결 론: 세 가지 다른 방법으로 제작한 코발트–크롬 합금의 미세거칠기값은 통계적으로 차이가 없었다. 기계적인 성질 중에서 탄성계수는 주조군이 높았고, 항복강도와 굴곡강도는 밀링군이 낮았다. 세라믹 탈락면을 검사하면, 모두 혼합된 탈락양상을 보였다. 주조, 밀링, SLM 제작 방식에 따라 결과의 차이는 있었지만, ISO 기준에 따르면 세 군 모두 결합강도가 임상적으로 사용 가능한 기준을 통과한 것으로 나타났다. 여러 특성을 고려했을 때, 선택적 레이저 용융 방식은 기존의 전통적인 제작방법을 대체할 가능성이 있을 것으로 보인다. Purpose: The application range of 3D printing technology in the dental field is increasing due to the development of additive manufacturing technology and the advantages of manufacturing methods. However, there is a lack of research on differences in various characteristics when a prosthesis produced by 3D printing is compared with one produced by a conventional method. The purpose of this study is to determine whether there are differences in characteristics (metal-ceramic bond strength, mechanical properties) of metal depending on different manufacturing methods (casting, milling, and selective laser melting). Materials and methods: To measure the mechanical properties of alloys, Co–Cr alloy specimens were prepared in three different ways: via casting using ingots (Star Loy C, Dentsply Sirona, Pennsylvania, USA), milling using milling disks (Starbond Co–Cr block, Scheftner Dental Alloys, Mainz, Germany), or selective laser melting (SLM) using powder (SP2, EOS, Krailling, Germany). Specimens were fabricated in the shape of a 34 × 13 × 1.5 mm plate in accordance with ISO 22674:2016. Twelve specimens were prepared for each group. The flexural stress–strain curves of the metals were drawn based on the results of three-point bending tests. Afterward, elastic modulus, yield strength, and flexural strength values were calculated. In addition, to measure their metal–ceramic bond strength values, specimens were prepared in the same way as 25 × 3 × 0.5 mm plates in accordance with ISO 9693-1:2012. An 8 × 3 × 1.1 mm ceramic part (Hera Ceram, Heraeus, Hanau, Germany) was applied in the center portion above it. For each of the 12 specimens produced, the metal–ceramic bond strength (τb) value was measured through three-point bending tests. After the experiment, five specimens were randomly selected from each group, and their surface roughness (Ra) values were measured at three sites per specimen. Next, the surface of specimens was analyzed via energy dispersive X-Ray spectroscopy (EDX) after the ceramic part had been removed. In addition, the surface where the metal had broken and the surface from which the ceramic part fell off were observed using scanning electron microscopy (SEM). The results of the tests were checked for equal dispersion by applying the Levene's test, and the influence of manufacturing methods on Ra, elastic modulus, yield strength, flexural strength, and metal–ceramic bond strength values, as well as the percentage of ceramic remaining on the surface, were statistically analyzed using one-way ANOVA (analysis of variance) followed by Tukey's Post-hoc test (α = 0.05). Results: The Ra values were not statistically different (casting group 1.19 ± 0.58 μm, milling group 0.88 ± 0.46 μm, and SLM group 1.10 ± 0.30 μm), the elastic modulus value was the largest for the casting group (casting group 560.53 ± 21.53 GPa, milling group 473.55 ± 35.02 GPa, and SLM group 464.55 ± 10.77 GPa), and the yield strength value (casting group 567.92 ± 35.53 MPa, milling group 323.86 ± 32.04 MPa, and SLM group 591.18 ± 22.31 MPa) and the flexural strength value (casting group 792.31 ± 81.64 MPa, milling group 494.16 ± 51.93 MPa SLM group 849.48 ± 24.45 MPa) were the smallest for the milling group. By observing the fracture surface of the metals via SEM, characteristic dendritic and inter-dendritic structures resulting from non-uniform cooling after casting were observed in the casting group, uniform surfaces were observed in the milling group, and the SLM group showed nanosized crystalline structures. Wave striations were observed on the fracture surface of the milling group, while the SLM group showed cleavage step patterns. The casting group attained a high τb value (casting group 32.51 ± 2.68 MPa, milling group 26.98 ± 3.97 MPa, and SLM group 29.07 ± 2.90 MPa). However, all three groups passed the ISO standard test. Ceramic remains on the surface after removing the ceramic were observed. From the results of the component analysis using EDX, the proportion of silicon detected on the surface is in the order of the milling group, the SLM group, and the casting group, all of which showed a mixed failure pattern (casting group 36.44 ± 6.37%, milling group 57.10 ± 12.26%, and SLM group 49.50 ± 7.69%). Conclusions: The Ra values of the Co–Cr alloys produced by the three different methods were not different. Among the mechanical properties tested, the elastic modulus value was high for the casting group and yield strength and flexural strength values were low for the milling group. Every specimen showed a mixed failure pattern. Although there were differences in the results for the casting, milling, and SLM manufacturing methods, it was found that they all passed the test of bond strength according to the ISO standards. Considering many other advantages, the SLM method seems to have the potential to replace the traditional fabrication method.
Z-scheme mechanism에 의한 광촉매 물 분해 수소제조
We studied the water splitting into H₂ and O₂ using two different semiconductor photocatalysts and a redox mediator, mimicking the Z-scheme mechanism of the photosynthesis. It was found that the H₂ evolution took place on a Pt-SrTiO₃ (Cr-Ta doped) photocatalyst using an I- electron donor under the visible light irradiation. The Pt-WO₃ photocatalyst showed an excellent activity of the O₂ evolution using an IO₃^(-) electron acceptor under visible light. Both H₂ and O₂ gases evolved in the stoichiometric ratio (H₂/O₂=2) for more than 250h under visible light a mixture of the Pt-WO₃ and the Pt-SrTiO₃ (Cr-Ta doped) powders suspended in NaI aqueous solution. It is for the first time that the stoichiometric water splitting occurred over oxide semiconductor photocatalysts under the visible light irradiation. We proposed a two-step photo-excitation mechanism using a pair of I-/IO₃^(-) redox mediators.