http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
ANFIS 기반의 유황별 조건부 댐 유입량 예측기법 개발 및 평가
문건호,김선호,배덕효,Moon, Geon-Ho,Kim, Seon-Ho,Bae, Deg-Hyo 한국수자원학회 2018 한국수자원학회논문집 Vol.51 No.7
본 연구에서는 ANFIS 기반의 유황별 댐 예측유입량 산정 기법(Flow regime-based ANFIS Dam Inflow Prediction, FADIP)을 개발하고, 이를 단순 ANFIS 기반 댐 예측유입량 산정 기법(ANFIS Dam Inflow Prediction, ADIP)과 비교 평가하였다. 대상유역은 국내 주요 다목적댐인 충주댐 유역과 소양강댐 유역을 선정하였으며, 입력자료로 댐 유입량, 강수량, 장기기상예보 자료를 사용하였다. 모델의 훈련 및 보정기간으로 충주댐 유역은 1987~2010년, 소양강댐 유역은 1984~2010년을 선정하였다. 검정기간은 두 유역 모두 2011~2016년을 활용하였다. 훈련 및 보정결과 FADIP는 ADIP에 비해 평수기, 저수기에 훈련이 개선되는 것으로 나타났다. 검정결과 ADIP는 통계모델의 학습방법 특성상 일반적인 사상에 학습이 이루어져, 저수기에 예측성이 떨어지는 것으로 나타났다. 반면 FADIP는 ADIP에 비해 전기간의 정확도가 향상되었으며, 특히 평수기와 저수기에 예측성이 우수하였다. 따라서 FADIP는 다목적댐 이수관리에 활용성이 높을 것으로 판단된다. Flow regime-based ANFIS Dam Inflow Prediction (FADIP) model is developed and compared with ANFIS Dam Inflow Prediction (ADIP) model in this study. The selected study area is the Chungju and Soyang multi-purpose dam watersheds in South Korea. The dam inflow, precipitation and monthly weather forecast information are used as input variables of the models. The training and validation periods of the models are 1987~2010 for Chungju and 1984~2010 for Soyang dam watershed. The testing periods for both watersheds are 2011~2016. The results of training and validation indicate that FADIP has better training ability than ADIP for predicting dam inflow in normal and low flow regimes. In the result of testing, ADIP shows low predictability of dam inflow in the low flow regime due to the model tuning on all flow regime together. However, FADIP demonstrates the improved accuracy over the entire period compared to ADIP, especially during the normal and low flow seasons. It is concluded that FADIP is valuable for the prediction of dam inflow in the case of drought years, and useful for water supply management of the multi-purpose dam.
적층제조방식으로 제작된 관 내부 핀 형상에 따른 내부 유동 특성 연구
문건호(Geon Ho Moon),서보민(Bo Min Seo),강동현(Dong Hyeon Kang),정승범(Seung Bum Jung),박창용(Chang Yong Park) 대한설비공학회 2022 대한설비공학회 학술발표대회논문집 Vol.2022 No.6
This study was conducted a numerical analysis to find out the pressure drop and heat transfer performance in the tubes with the fin structure by using ANSYS Fluent. The analysis models are four tubes in which the pin and triangular fin structures were arranged. Working fluid is water. The analysis conditions were set as Reynolds number 5000~15000, inlet temperature 32.5℃ and the boundary condition was set a constant heat flux 10000 W/m2 on the wall. The tubes with the triangular fin structure indicated lower pressure drop and higher heat transfer performance than the pin fin structure.
음향현미경의 V(z)곡선을 이용한 재료의 특성에 관한 연구
문건,고대식,전계석,Moon, G.,Ko, D.S.,Jun, K.S. 한국음향학회 1988 韓國音響學會誌 Vol.7 No.2
본 논문에서는 음향현미경의 V(z)곡선을 해석하고 실험결과와 비교 고찰하였으며 V(z)곡선과 재료의 탄성 특성사이의 관계를 연구분석하였다. V(z)곡선의 이론적인 해석은 angular spectrum과 ray optics 이론을 사용하였고 실험은 동작주파수가 3MHz인 음향현미경을 구성하여 행하였다. 실험결과 V(z)곡선은 재료마다 고유의 형태를 나타내며 V(z) 곡선에서 극대치 사이의 간격은 재료에서 Rayleigh 파의 음향속도를 산출하는 데 이용될 수 있음을 보였다. In this paper, V(z) curve has been analyzed theoretically and compared with the experimental result, and the relation between the V(z) curve and the material characteristic has been studied. Angular spectrum and ray optics theory have been used for theoretical analysis and the acoustic microscope operating at a center frequency of 3 MHz has been used for experiment. In experiment, it has been shown that each material has a V(z) curve of a unique form and the interval of dips appearing in the V(z) curves have been used to determine the Rayleigh wave velocity.
문건 濟州大學校 産業技術硏究所 1998 산업기술연구소논문집 Vol.9 No.2
The most difficult problem to be solved in the None-Destructive-Test is the separation of the correlated acoustic images caused by existing more than two images on the same axis. Though various techniques are proposed but satisfactory results are not yet come out. In this paper, I proposed the new technique enhancing the resolution of acoustic images by applying the time-delay signal aquisition method. By using the 500 won coin as the experimental sample, 1 detected and separated the backside image which is correlated with the front surface image by applying proposed technique. I used the variable time delayed pulse to distinguish the complex acoustic signals. The experimental results confirmed the better resolution compare with data thresholding techniques in separating the images.
음향횡파를 이용한 고체내부의 영상검출 개선에 관한 연구
문건,Moon, Gun 한국통신학회 1991 韓國通信學會論文誌 Vol.16 No.12
본 연구에서는 음향파의 입사각을 횡파임계각도 이상으로 하여 횡파를 발생시키고 이를 이용하여 종래방식보다 고체 내부에 존재하는 미소결함의 검출한계를 개선시키는 방법을 연구분석하였다. 실험을 위하여 중심주파수3MHz인 반사형 음향현미경 시스템을 구성하였고 서로 다른 깊이에 임의의 결함을 갖는 시료를 제작하였으며 defocus 깊이를 변화시키면서 실험하였다. 실험결과 고체내부 Rayleigh파장의 3배정도 깊이에 존재하는 1mm 크기의 결함을 검출할 수 있었다.
문건,Moon, Gun 한국통신학회 1993 韓國通信學會論文誌 Vol.18 No.1
본 연구에서는 3MHZ의 접속 음향변환자를 사용하여서 고체 샘플에서 반사되어 오는 음향파를 검출하는 시스템을 구성하였고, 이를 이용하여 음향 변환자의 촛점위치와 고체표면과의 거리(Z)에 따른 음향 반사신호의 특성곡선 V(Z)을 검출하였다. 여러가지 고체재료의 V(Z) 특성곡선을 실험에의해 검출한 결과 고체에따라 그들 고유의 V(Z)특성곡선 모양을 나타내고 있음을 보여 주었다. 본 연구에서는 V(Z)곡선을 분석하면 고체특성을 판별할 수 있음을 제시하였다. On this study. Constructed the system detecting the reflective acoustic waves from the solid-samples using the 3MHZ focused-acoustic transducer and detected the V(Z) charateristics curves varied by the distance between the focusing position and the solid surface. The results of the experimental detection to various solid materials showed that the materials have their own unique shape of V(Z) curves. This paper suggested the possibility distinguishing the solid characteristics by analysing the V (Z) curves.