輪廻理論의 起源

尹炳植(윤병식) 한국학중앙연구원 1983 한국학 Vol.6 No.2

유무선망에서 사용되는 디지털 음성 부호화 기술 동향

윤병식(Byungsik Yoon),최송인(Songin Choi),강상원(Sangwon Kang) 한국방송·미디어공학회 2005 방송공학회논문지 Vol.10 No.3

도시자영자 가입실태와 정책과제

윤병식 한국보건사회연구원 1999 보건복지포럼 Vol.34 No.-

철도통합무선망(LTE-R)의 무선통신특성 분석

윤병식(Byungsik Yoon),이숙진(Sook-Jin Lee),김동준(Dong Joon Kim),성동일(Dong Il Sung) 한국산학기술학회 2020 한국산학기술학회논문지 Vol.21 No.9

국토교통부는 2012년부터 주요 철도 정책으로 철도전용의 통합무선망 기술 확산에 노력했다. 그 결과, 2017년 세계 최초로 LTE 기반 철도통합무선망(LTE-R)을 강릉선 KTX 노선에 (만종역-강릉역) 구축 완료하였으며, 현재 해당 구간에서 LTE-R 통신 시스템을 상용 운영 중이다. 안전하고 효율적인 열차 운행을 위하여 철도통합무선망은 그룹통화, 긴급통화, 철도전용 호처리, 무선통신 기반 열차제어를 수행함에 따라 통상적인 무선통신과 차별화된 철도전용의 통신기능과 성능요구사항이 존재한다. 본 논문에서는 철도통합무선망이 갖춰야 하는 기능 및 성능 요구사항을 유럽 철도통합 무선망의 분석을 통하여 제시하고, 아울러 강릉선 KTX에서 실제 측정한 LTE-R 무선통신의 특성과 성능을 기반으로 현재 구축된 통신망의 적정성과 안정성에 대한 분석을 수행하였다. 해당 노선의 평균적 전파품질이 열차제어를 위한 통신 요구사항을 만족하더라도 일부 구간에서 RLF(Radio Link Failure)와 같은 급격한 통신 성능저하를 확인하였다. 본 논문에서는 필드 테스트를 기반으로 하는 LTE-R 무선통신 분석을 바탕으로 향후 열차제어를 위한 네트워크 구축과 성능개선 방향을 제시한다. The Ministry of Land, Infrastructure and Transport of Korea has been trying to spread integrated railway communication network technologies based on a major railway policy since 2012. As a result, the world"s first commercial Long-Term Evolution - Railway (LTE-R) network was established on the Gangneung line (Manjong station - Gangneung station) and has been commercially operating as a railway communication system since 2017. Special function and performance requirements are needed for safe and efficient railway operations, such as group calls, emergency calls, functional addressing, and train control based on wireless communications. In this paper, we present functional and performance railway communications requirements that are based on European wireless railway communications systems. In addition, we measured communications characteristics and performance using a KTX field test on the Gangneung line to analyze the validity and reliability of the LTE-R network. Although the average Radio Frequency (RF) conditions were satisfied in the requirements, we found sudden communications quality degradation, such as Radio Link Failure (RLF) in some railway sections. We propose a way to improve performance and network installations based on in-depth analysis of LTE-R communications field-test results.

이종금속 용접부 축방향 결함 검출을 위한 초음파 탐촉자 설계

윤병식(Byung-Sik Yoon),김용식(Yong-Sik Kim),양승한(Seung-Han Yang) 한국비파괴검사학회 2011 한국비파괴검사학회지 Vol.31 No.5

원자력발전소의 이종금속 용접부는 PWSCC 결함에 민감한 것으로 알려져 있으며 기량검증된 검사자가 기량검증된 절차서를 사용하여 가동중검사 기간 중에 주기적인 검사를 수행하고 있다. 국내 원자력발전소 이종금속 용접부의 형상 조사 결과에 따르면 대부분의 이종금속 용접부가 경사진 노즐부나 인접부에 위치하는 것으로 나타났다. 일반적인 초음파 탐촉자를 사용하여 경사부위에 위치한 이종금속 용접부의 검사를 수행할 경우 초음파 탐촉자의 접근성이 제한되어 검사체적을 모두 검사하기가 어렵다. 특히 축방향 결함 검출을 위한 원주방향 주사에서는 초음파 탐촉자가 경사면에 위치하게 되면 반사체로부터 결함 신호를 얻기가 어려우며 이에 따라 결함 검출이 어렵게 된다. 이러한 문제점을 극복하기 위해서는 경사면을 고려하여 비틀림 각도를 적용한 초음파 탐촉자를 사용하는 것이 필요하다. 모델링을 통하여 비틀림 굴절 종파탐촉자를 설계하고 축방향 결함 검사용 비틀림 굴절 종파탐촉자를 제작하여 실험을 통하여 결함으로부터 신호를 취득하였다. 일반 탐촉자와 비틀림 각도가 적용된 탐촉자의 초음파 응답신호를 비교한 결과 비틀림 각도가 적용된 탐촉자의 초음파 응답신호가 훨씬 뛰어난 것으로 나타났다. Dissimilar metal welds in nuclear power plant are known as very susceptible to PWSCC flaws, and periodically inspected by the qualified inspector and qualified procedure during in-service inspection period. According to field survey data, the majority of their DMWs are located on tapered nozzle or adjacent to a tapered component. These types of configurations restrict examination access and also limit examination volume coverage. Additionally, circumferential scan for axially oriented flaw is very difficult to detect located on tapered surface because the transducer can"t receive flaw response from reflector for miss-orientation. To overcome this miss-orientation, it is necessary adapt skewed ultrasonic transducer accomodate tapered surface. The skewed refracted longitudinal ultrasonic transducer designed by modeling and manufactured from the modelling result for axial flaw detection. Experimental results showed that the skewed refracted longitudinal ultrasonic transducer get higher flaw response than non-skewed refracted longitudinal ultrasonic transducer.

작업효율성과 작업여건 간의 관계 정량적 분석

윤병식(Yoon Byung-Sik),유정호(Yu Jung-Ho),김창덕(Kim Chang-Duk) 대한건축학회 2010 大韓建築學會論文集 : 構造系 Vol.26 No.7

Construction industries is a labor intensive industries. According to Korea Productivity Center, most OECD members indicate high labor productivity more than Korea labor productivity in construction industries. First of all, work efficiency should be improved, to increase labor productivity. Because the characteristic of construction work is a labor intensive, it is a important that the laborers should conduct effectively work. Also, as work condition has a influence on laborers and work process, work condition has a great influence on work efficiency and labor productivity. However, management of work condition is not easy in construction site, because work condition has a large number and variety of elements, such as materials, labor and equipments. Therefore the purpose of this study is to analyze quantitative analysis on the relationship between Work Condition and Work Efficiency

횡파 위상배열 초음파탐촉자를 이용한 원자력발전소 저압 터빈 검사 적용 타당성 연구

윤병식,김용식,김진회,Yoon, Byung Sik,Kim, Yong Sik,Kim, Jin Hoi 한국압력기기공학회 2013 한국압력기기공학회 논문집 Vol.9 No.1

Steam turbine blades and discs of nuclear power plants are one of the most highly stressed areas of turbine rotor, and periodic inspection of the blade roots is essential for monitoring integrity and preventing turbine failure. Ultrasonic technique is applied for volumetric inspection of blade root. However, the complexity of blade root geometry imposes challenges to inspection of blades and discs. Recently, phased array ultrasonic inspection technology is being applied to numerous power generation inspection applications including turbine rotor. The phased array ultrasonic technique requires customized inspection wedges which are generally necessary to generate effectively higher incident angle. But the usage of this wedge can cause access limitation for the lower stage blades of turbine because of the wedge front length. Therefore, the shear wave phased array probe which can generate high inspection angle without wedge is essentially necessary. In this study, feasibility study is conducted for the shear wave phased array ultrasonic probe application to blade and disc inspection. As results, the experimental results show that the shear wave phased array probe can detect the flaw and measure its size with reliable accuracy. Therefore if this shear wave phased array probe is applied to field inspection of blade and disc, more reliable inspection is expected for turbine having access limitation.

한울 3호기 주급수 배관 용접부 육안검사 경험

윤병식,문균영,김용식,Yoon, Byung Sik,Moon, Gyoon Young,Kim, Yong Sik 한국압력기기공학회 2015 한국압력기기공학회 논문집 Vol.11 No.1

Nuclear power plant steam generator that is one of the main component has several thousands of thin tubes. And the steam generator tube is subject to damage because of the severe operation conditions such as the high temperature and pressure. Therefore periodic inspections are conducted to ensure the integrity of steam generator component. Hanul unit 3 also has been inspected in accordance with in-service inspection program and is scheduled to be replaced for exceeding the plugging rate which was recommended by manufacturer. During the steam generator replacement activity, we found several clustered porosity on inner surface of main feed water pipe. Additionally crack-like indications were found at weld interface between base material and weld of main feed water pipe. This paper describes the field experience and visual testing results for inner surface of main feed water pipes. The destructive test result had shown that these indications were porosities which were caused by manufacturing process not by operation service.

원자력발전소 배관 내부 매질이 초음파검사에 미치는 영향 평가

윤병식,김용식,양승한,Yoon, Byung Sik,Kim, Yong Sik,Yang, Seung Han 한국압력기기공학회 2013 한국압력기기공학회 논문집 Vol.9 No.1

The periodic inspection of piping and pressure vessels welds in nuclear power plant has to provide reliable result related to weld flaws, such as location, maximum amplitude response, ultrasonic length, height and finally the nature or flaw pattern. The founded flaw in ultrasonic inspection is accepted or rejected based on these data. Specially, the amplitude of flaw response is used as basic parameter for flaw sizing and it may cause some deviation in length sizing result. Currently the ultrasonic inspections in nuclear power plant components are performed by specific inspection procedure which describing inspection technique include inspection system, calibration methodology and flaw characterizing. To perform ultrasonic inspection during in-service inspection, reference gain should be established before starting ultrasonic inspection by the requirement of ASME code. This reference gain used as basic criteria to evaluate flaw sizing. Sometimes, a little difference in establishing reference gain between calibration and field condition can lead to deviation in flaw sizing. Due to this difference, the inspection result may cause flaw sizing error. Therefore, the objective of this study is to compare and evaluate the ultrasonic amplitude difference between air filled and water filled pipe in nuclear power plant. Additionally, the accuracy of flaw sizing is estimated by comparing both conditions.

원자력발전소 배관 용접부 위상배열 초음파검사 절차서 개발 및 기량검증

윤병식(Byung-Sik Yoon),양승한(Seung-Han Yang),김용식(Yong-Sik Kim),이희종(Hee-Jong Lee) 한국비파괴검사학회 2010 한국비파괴검사학회지 Vol.30 No.4

원자력발전소 배관 용접부에 대한 수동 초음파검사는 KPD(Korean Performance Demonstration)의 일반 절차서를 사용하여 기량 검증을 인정받고 있으나, 자동 초음파검사의 경우에는 일반 절차서가 없으며 해당 자동 검사 장비를 이용하여 절차서 기량 검증을 받아야 한다. 현재까지 국내에서 수행되고 있는 자동 초음파검사에 대한 절차서 기량검증은 대부분 펄스-반사기법을 적용한 절차서이나, 최근에 각광받고 있는 위상배열 초음파검사 기법을 이용한 절차서 기량검증은 국내에서 시행된 사례가 전무하다. 본 연구에서는 원자력발전소 가동중검사에 위상배열 초음파검사 기법을 적용하기 위하여 위상배열 초음파 신호취득 및 평가 소프트웨어를 개발하고 위상배열 초음파 탐촉자 및 웨지를 설계 하였다. 개발된 절차서에 대하여 결함 검출, 길이 및 크기 측정에 대한 기량검증을 수행하였으며, 검증된 위상배열 초음파탐상검사 절차서는 향후 원자력발전소 배관 용접부 검사에 적용할 예정이다. The manual ultrasonic examination for the nuclear power plant piping welds has been demonstrated by using KPD(Korean Performance Demonstration) generic procedure. For automated ultrasonic examination, there is no generic procedure and it should be qualified by using applicable automated equipment. Until now, most of qualified procedures used pulse-echo technique and there is no qualified procedure using phased array technique. In this study, data acquisition and analysis software were developed and phased-array transducer and wedge were designed to implement phased array technique for nuclear power plant in-service inspection. The developed procedure are qualified for performance demonstration for the flaw detection, length sizing and depth sizing. The qualified procedure will be applied for the field examination in the nuclear power plant piping weld inspection.