都市街路의 遲滯度推定에 관한 硏究

임채문,권강훈,이주호,김태형 대구대학교 과학기술연구소 2001 科學技術硏究 Vol.8 No.1

This study suggested input variables whose effects have been considered by adjusting various input variables in the TRANSYT-7F and NETSIM, the Simulation programs employed in calculating the delay time at street sections. The results can be summarized as follow. 1. Among the input variables in the TRANSYT-7F needed to calculate the delay time at street sections, the excluded are those which effect the most on time delay, such as bus stops, pedestrian crossings and on/off ramps. Among the input variables the most affecting factors are Saturation flow rate and time delay whose suggested quotients are well summarized in the text of this study. 2. There are variables which affect the change of time delay in the NETSIM, such as bus stop, pedestrian crossing, bus appearance period, and departure time delay. This study did the Simulation program using those variables except pedestrian crossing because, as the result of the correlation analysis suggests, there is a strong correlation between bus stop and pedestrian crossing. In this study, the survey had been done in the morning and afternoon except the Peak time, so heavily congested sections were excluded. And both sides of three street sections were surveyed. Therefore, there should be further studies on heavily congested situations and many other street sections.

매복 상악 견치의 맹출 유도에 관한 증례 보고

이종갑,권태희,손홍규,김형태 大韓小兒齒科學會 1993 大韓小兒齒科學會誌 Vol.20 No.2

Upper cuspid impation is a serious that occurs with sufficient frequency to justify diagnosis and intervention as early as a dental age of 8 years. The maxillary cuspid follows a more difficult and tortuous path of eruption than other tooth. Where upper arch crowding prevents such a tooth from following its normal eruption path, it will diverted either buccally or palatally. The diagnosis of canine impaction is on both clinical and radiographic examinations. When clinician detects early signs of ectopic eruption of canines, an attempt should be made to prevent theier impaction and its potential sequelae. Screening consists of identifying patients who lack a normal cuspid bulge on palpation, with follow-up radiographic evaluation where indicated. Selective removal of deciduous cuspids is a suggested interceptive measure in class Ⅰ uncrowded malocclusions. Each patient with an impacted canine must undergo a comprehensive evaluation of the malocclusion. The clinician should then consider the various treatment options available for the patient. Surgical exposure of the canine and orthodontic treatment to bring the tooth into the line of occlusion is the most desirable approach. After the surgical exposure of the impacted tooth, an auxiliary(button) is attached to the crown. It should be reemphasized that in the surgical exposure of an impacted tooth, only enough bone should be removed to allow for the placement of a bracket and that during the procedure the CEJ should not be intentionally exposed. The removable appliance was designed This applied traction along a desired path of eruption using elastics changed daily Removable appliance seemed to offer more in vertical anchorage than did the fixed appliances. 13 year-old male and 14 year-old female with impacted maxillary canine were treated with surgical exposure and direct traction.

텔레스코픽 크라운 임플란트 지지 피개의치와 치아 지지 피개의치의 하악골내 응력분포에 관한 유한요소분석

이창규,백장현,김태훈,김민정,김형섭,권긍록,우이형 대한치과보철학회 2012 대한치과보철학회지 Vol.50 No.1

PURPOSE. The purpose of this study was to investigate the stress distribution in mandibular implant-supported overdentures and tooth-supported overdentures with telescopic crowns. MATERIALS AND METHODS. The assumption of this study was that there were 2, 3, 4 natural teeth and implants which are located in the second premolar and canine regions in various distributed conditions. The mandible, teeth (or implants and abutments), and connectors are modeled, and analyzed with the commercial software, ANSYS Version 10.1. Stress distribution was evaluated under 150 N vertical load bilaterally on 3 experimental conditions - between canine areas, canine and 2nd premolars, 10 mm posterior to 2nd premolars. RESULTS. Overall, the case of the implant group showed more stress than the case of the teeth group in stress distribution to bone. In stress distribution to superstructures of tooth and implants, there was no significant difference between TH group and IM group and the highest stress appeared in TH-IV and IM-IV. The stress caused from bar was much higher than those of implant and tooth. TH group showed less stress than IM group in stress distribution to abutment teeth and implant. CONCLUSION. The results shows that it is crucial to make sure that distance between impact loading point and abutment tooth does not get too far apart, and if it does, it is at best to set abutment tooth on premolar tooth region. It will be necessary to conduct more experiments on effects on implants, natural teeth and bone, in order to apply these results to a clinical treatment. 연구 목적: 이 연구의 목적은 텔레스코픽 크라운 하악 임플란트 지지 피개의치와 치아 지지 피개의치에서 지대치의 수와 위치에 따른 응력 분산을 비교하기 위함이다. 연구 재료 및 방법: 본 연구에서는 임플란트를 4개 식립하고 임플란트 지지 피개의치로 설계하였고, 식립 위치를 견치와 소구치 부위에 위치 별로 3개 또는 2개 존재시를 실험군으로 설정하였다. 자연치아를 갖는 경우도 견치와 제2소구치 4개를 가진 경우를 대조군으로 설정하고 부위별로 3개 또는 2개를 가지는 경우를 실험군으로 설정하였다. ANSYS Version 10.1 (Swanson, Inc., USA)로 분석하였다. 결과: 악골내 응력의 경우, 전반적으로 임플란트(IM)로만 구성된 경우가 치아(TH)로만 구성된 경우에 비해 응력이 크게 발생하였다. 상부구조의 경우, 치아군(TH)과 임플란트군(IM) 사이의 차이는 크게 없었으며 편측 견치와 제2소구치에 지대치 또는 임플란트가 위치하는 경우 가장 큰 응력이 나타났고 바(bar)에서 발생된 응력이 임플란트와 치아에서 발생되는 응력에 비해 상대적으로 훨씬 크게 발생하였다. 지대치와 임플란트의 경우, 치아군(TH)이 임플란트군(IM)보다 응력이 작게 발생하였다. 결론: 본 연구의 결과로부터 지대치(임플란트 또는 치아)를 설정할 때는 하중작용점과 지대치 사이의 거리가 너무 길어지지 않도록 지대치의 수와 위치를 확보해야 하며 소구치 자리에 지대치를 확보하는 것이 유리하다. 앞으로, 실제 임상에 적용하였을 경우, 임플란트 및 자연치아와 악골에 미치는 결과에 대한 연구가 더 필요할 것으로 생각된다.

임신 종결 후 발생한 자궁 동정맥 누공에서 자궁동맥색전술로 치료한 1예

김종민,이해혁,김태희,남계현,심일구,이권해,김형문,이임순,장종호 순천향의학연구소 2004 Journal of Soonchunhyang Medical Science Vol.10 No.2

Arteriovenous fistula of uterus is rarely reported disease. This vascular malformation is very dangerous condition because Dilatation & curettage can cause massive uterine bleeding without accurate diagnosis. The diagnosis is made by angiography, gray scale ultrasonography, color and duplex doppler ultrasonography, computed tomography, and magnetic resonance imaging is helpful. Especially color and duplex doppler ultrasonography is allows convincing detection and diagnosis of arteriovenous fistula. Recently transcatheter uterine artery embolization is treatment of choice. We have experienced a case of arteriovenous fistula of uterus. Which is presented with a brief review of literature.

Evaluation of a Crank-type Walking Cultivator for Upland Farming

Kwon, Tae Hyeong,Ashtiani-Araghi, Alireza,Lee, Chungu,Kang, Tae Gyoung,Lee, Byeong-Mo,Rhee, Joong-Yong Korean Society for Agricultural Machinery 2014 바이오시스템공학 Vol.39 No.1

Purpose: This research was conducted to evaluate feasibility of a crank-type walking cultivators for weeding in furrowed upland. Methods: A walking cultivator developed by RDA was selected and evaluated with its working speed (S), cultivation depth (CD) and weeding performance (WP). The evaluation was performed in upland field on July and August, 2012. Also kinematic analysis of the machine was performed to draw out design improvements. Results: S in flat, uphill and downhill were about 0.11 m $s^{-1}$, 0.11 m $s^{-1}$, and 0.13 m $s^{-1}$ respectively. It was found that S had a low relevance with user conditions. The CD was 35 ~ 40 mm which was satisfied with the RDA guide for weeding machine. A wide variation was observed in values of WP depending on the growth stages of weeds and field conditions. The cultivator showed low performance in eliminating the well-grown weeds. Kinematic simulation revealed that high forward speed caused a high ratio of un-weeded area. Conclusions: The weeding performance of the cultivator was satisfactory for weeds in early growth stage but it showed difficulties in handling on up-slope and in entering up-land. Specifically, the weight of the cultivator was judged as overweight for female workers. The crank-hoe type cultivator was judged as unsuitable for small walking type machine due to weight of the four-bar linkage system. Kinematic analysis revealed that the ratio of crank speed to the ground speed must be 850 rpm s $m^{-1}$ (255 rpm based on 0.3 m $s^{-1}$) or greater to avoid uncultivated area. Selection of forward speed is a decisive factor in designing the weeding cultivator.

A System Dynamics Model of Alternative Fuel Vehicles Market under the Network Effect

( Kwon Tae Hyeong ) 한국시스템다이내믹스학회 2007 한국시스템다이내믹스 연구 Vol.8 No.2

According to the system dynamics model of this study, if there is a significant network effect on vehicle operating costs, it is difficult to achieve the shift to AFV even in the long term without a policy intervention because the car market is locked in to the current structure. Network effect can be caused by an increasing return to scale in fuel supply sector as well as in maintenance service sector. It is also related to the fact that the reliability and awareness of consumers on new products increases with the growth of the market share of the new products. There are several possible policy options to break the "locked in" structure of car market, such as subsidy on vehicle price (capital cost), subsidy on fuel (operating cost) and niche management policy. Combined policy options would be more effective than relying on a single policy option to increase the market share of AFV.

Orlginal Article : Off-Road Machinery System Engineering ; Evaluation of a Crank-type Walking Cultivator for Upland Farming

( Tae Hyeong Kwon ),( Alireza Ashtiani Araghi ),( Chun Gu Lee ),( Tae Gyoung Kang ),( Byeong Mo Lee ),( Jong Yong Rhee ) 한국농업기계학회 2014 바이오시스템공학 Vol.39 No.1

Purpose : This research was conducted to evaluate feasibility of a crank-type walking cultivators for weeding in furrowed upland. Methods: A walking cultivator developed by RDA was selected and evaluated with its working speed (S), cultivation depth (CD) and weeding performance (WP). The evaluation was performed in upland field on July and August, 2012. Also kinematic analysis of the machine was performed to draw out design improvements. Results: S in flat, uphill and downhill were about 0.11 m s-1, 0.11 m s-1, and 0.13 m s-1 respectively. It was found that S had a low relevance with user conditions. The CD was 35 ~ 40 mm which was satisfied with the RDA guide for weeding machine. A wide variation was observed in values of WP depending on the growth stages of weeds and field conditions. The cultivator showed low performance in eliminating the well-grown weeds. Kinematic simulation revealed that high forward speed caused a high ratio of un-weeded area. Conclusions: The weeding performance of the cultivator was satisfactory for weeds in early growth stage but it showed difficulties in handling on up-slope and in entering up-land. Specifically, the weight of the cultivator was judged as overweight for female workers. The crank-hoe type cultivator was judged as unsuitable for small walking type machine due to weight of the four-bar linkage system. Kinematic analysis revealed that the ratio of crank speed to the ground speed must be 850 rpm s m-1 (255 rpm based on 0.3 m s-1) or greater to avoid uncultivated area. Selection of forward speed is a decisive factor in designing the weeding cultivator.

Rapid Identification and Validation of Xanthomonas oryzae pv. oryzae (Xoo) by using PCR-amplified Phage Integrase and Transposase A Gene

Hyeong-Kwon Shim,Tae-Hwan Noh,Mi-Hyung Kang,Young-Jin Park,Du-Ku Lee,Byoung Moo Lee,Kuldeep Tyagi,Chae-Hoon Paik,Geon-Hwi Lee 한국국제농업개발학회 2012 韓國國際農業開發學會誌 Vol.24 No.2

벼 흰잎마름병균의 정확한 진단을 위하여 PCR용 진단 kit를 개발하였다. 본 PCR kit를 개발하기 위하여 벼 흰잎마름 병균 유전체 정보 중 phage-related integrase and transposase gene의 염기서열을 이용하여 프라이머를 각각 제작하였다. 프라이머 염기서열은 XOP-F (5-CGG TCT GCT CAA TGA GGA AGA-3)와 XOP-R2 (5-TGC AAT TGG TGT TCTCCA GG-3), XOT-F (5-GTC ATA GGT GAG GCT TCCC-3)와 XOT-R2 (5-AGT GCG ATC TTT CAG CAG G-3)로 벼 흰잎마름병균의 DNA를 401bp와 492bp를 증폭하게 제작하였다. PCR 증폭은 벼 흰잎마름병균만 증폭하였으며 다른 세균인 Escherichia coli, Agrobacterim, Pectobacterium caratovora subsp. cartovorum, P. atrosepticum, Pseudomonasputida, P. syringae, P. savastanoi pv. phaeolicola, P. savastanoipv. savastanoi and P. marginalis pv. Marginalis 등은증폭되지 않아 특이성이 인정 되었다. 본 프라이머로 병이 의심되는 벼잎과 논물에서 병원균을 3시간 이내에 검출할 수 있었다. PCR-based specific identification of Xanthomonas oryzae pv. oryzae (Xoo), the pathogen responsible for bacterial blight (BB) of rice, was developed by amplifying the Xoo-specific phage-related integrase and transposase gene. Therefore, dual primers, XOP-F (5-CGGTCTGCTCAATGAGGAAGA-3) and XOP-R2 (5-TGCAATTGGTGTTCTCCAGG-3) and XOT-F (5-GTCATAGGTGAGGCTTCCC-3) and XOT-R2 (5-AGTGCGATCTTTCAGCAGG-3) were designed and found to specifically amplify 401bp and 492bp fragments from all strains of Xoo isolates from diverse regions in Korea. The PCR products were only amplified from Xoo among other bacterial strains including Escherichia coli, Agrobacterim, Pectobacterium caratovora subsp. cartovorum, P. atrosepticum, Pseudomonas putida, P. syringae, P. savastanoi pv. phaeolicola, P. savastanoi pv. savastanoi and P. marginalis pv. marginalis. This method could also be applied to detect the pathogen in infected rice leaves and paddy field water within 3 hr.

A Study on Rotary Weeding Blade Installation Angle for Reduction of Hand Vibration in Working Type Cultivator

Kwon, Tae Hyeong,Kim, Joonyong,Lee, Chungu,Kang, Tae Gyoung,Lee, Byeong-Mo,Rhee, Joong-Yong Korean Society for Agricultural Machinery 2014 바이오시스템공학 Vol.39 No.1

Purpose: Walking type cultivator used for weeding generated excessive handle vibration as well as bouncing motion depending on the weeding speed. This research was conducted to define a design factor of the rotary weeding blades for reducing soil reaction forces as well as hand vibration. Methods: The motion and forces acting on the rotary blades were reviewed to find out the most influencing parameter on hand vibration. The installation angle (IA) of the blade was selected and analyzed to determine the condition of no reaction force less. For removing the unnecessary upward soil reaction, the design factor theory of weeding blade was suggested based on geometrics and dynamics. For evaluation of design factor theory, the experiment in situ was performed base on ISO 5349:1. The vibration $a_{hv}$ and theoretical value $X_{MF}$ were compared with two groups that one was positive group ($X_{MF}$ > 0) and the other was negative group ($X_{MF}$ < 0). Results: $X_{MF}$ was derived from rotational velocity, forward velocity, disk diameter, weeding depth, blade's width and IA of blade. Two groups had significant difference (p < 0.05). In aspect of the group mean total exposure duration, positive group was 17.53% bigger than negative group. When disk radius 100, 150 and 200 mm, minimum IAs were $4{\sim}27^{\circ}$, $3{\sim}15^{\circ}$ and $2{\sim}10^{\circ}$, respectively. A spread sheet program which calculated XMF was developed by Excel 2013. Conclusions: According to this result, minimum IA of weeding blade for soil reaction reduction could be obtained. For reduction hand-arm vibration and power consumption, minimum IA is needed.

다발성 손상시 수상직후의 CBC상 band form 출현의 의의

권태영 ( Tae Hyeong Kwon ),임경수 ( Kyoung Soo Lim ) 대한외상학회 1991 大韓外傷學會誌 Vol.4 No.1

On CBC examined immediately after multiple trauma, surgeons and emergency physicians couldn``t get much informations about injury severity and degree of injury. In other words, the leukocytosis didn``t reveal injury severity and hemoglobin/hematocrit level done immediately after trauma was normal range althought internal bleeding was continued. But band form count in leukocytes reveals close relation with injury severity and mortality. One hundred twenty two patients were studied prospectively to assess the injury severtiy and mortality according to band form(%) on CBC. Among them, 25 patients was re-examinated to calculate the immune cells(lymphocyte, T cell, Helper T cell(Th) and cytotoxicsuppressor T cell(Tc/s) and Th: Tc/s ratio). The patients(n=17) with band form above 3% in differential count of CBC revealed 27.0 ± 10.25 in Injury Severity Score(ISS), and group with below 3% was 14.8±8.76(P<0.00l). The mortality of patients with band form above 3% was three times higher than patients with below 3%. The Th : Tc/s ratio was 0.98: 1 in patients with band23%(n=6) and 1.27 in band<3%(n=19). In summary, the patients with band forms above 3% on CBC immediately after trauma were severly injured and immune function was much decreased. So emergency physicians must re-evaluate the injured patients if band form was above 3% in differential count of CBC.