http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
수냉쿨러의 냉각 효율 향상을 위한 플레이트 부품의 형상에 관한 연구
성윤호,김형찬,김선민,윤석영,이영웅,이상욱 순천향대학교 부설 산업기술연구소 2021 순천향 산업기술연구소논문집 Vol.27 No.2
This study investigates changes in cooling efficiency for heat sink plate width, perforated width, and chamfer angle as part of a parameter study to maximize cooling efficiency of heat sink by setting various variables on plates. The width of the plate is set to 16, 20, 24, 28 mm, perforated width 1.5, 2.0, 2.5 mm, chamfer angles 5, 10, 15 and 20°. By conducting a computational study with Ansys Fluent, the sink plate with plate width of 16mm, perforated width of 3mm and chamfer angle of 10° is shown to be the best cooling efficiency.
The outcome of endoscopic management of bile leakage after hepatobiliary surgery
( Seon Ung Yun ),( Young Koog Cheon ),( Chan Sup Shim ),( Tae Yoon Lee ),( Hyung Min Yu ),( Hyun Ah Chung ),( Se Woong Kwon ),( Taek Gun Jeong ),( Sang Hee An ),( Gyung Won Jeong ),( Ji Wan Kim ) 대한내과학회 2017 The Korean Journal of Internal Medicine Vol.32 No.1
Background/Aims: Despite improvements in surgical techniques and postoperative patient care, bile leakage can occur after hepatobiliary surgery and may lead to serious complications. The aim of this retrospective study was to evaluate the efficacy of endoscopic treatment of bile leakage after hepatobiliary surgery. Methods: The medical records of 20 patients who underwent endoscopic retrograde cholangiopancreatography because of bile leakage after hepatobiliary surgery from August 2009 to September 2014 were reviewed retrospectively. Endoscopic treatment included insertion of an endoscopic retrograde biliary drainage stent after endoscopic sphincterotomy. Results: Most cases of bile leakage presented as percutaneous bile drainage through a Jackson-Pratt bag (75%), followed by abdominal pain (20%). The sites of bile leaks were the cystic duct stump in 10 patients, intrahepatic ducts in five, liver beds in three, common hepatic duct in one, and common bile duct in one. Of the three cases of bile leakage combined with bile duct stricture, one patient had severe bile duct obstruction, and the others had mild strictures. Five cases of bile leakage also exhibited common bile duct stones. Concerning endoscopic modalities, endoscopic therapy for bile leakage was successful in 19 patients (95%). One patient experienced endoscopic failure because of an operation-induced bile duct deformity. One patient developed guidewire-induced microperforation during cannulation, which recovered with conservative treatment. One patient developed recurrent bile leakage, which required additional biliary stenting with sphincter-otomy. Conclusions: The endoscopic approach should be considered a first-line modality for the diagnosis and treatment of bile leakage after hepatobiliary surgery.
박제선,윤경구,이주형,용석응 江原大學校 産業技術硏究所 1997 産業技術硏究 Vol.17 No.-
This study was conducted to evaluate durability of concrete which are increasingly demanded recently. Concrete durability properties incorporating waste foundry sand was performed with the variable of W/C ratio, Sand/Waste foundry sand ratio and Air entrainment-Non air entrainment. Cylinder specimens were made and subjected to freezing and thawing cycle at -18℃ and 4℃. Dynamic modulus of elasticity were as F/T cycle increase. The results show that decreasing W/C ratio and AE concrete makes improved resistance of freezing and thawing improved. Especially, resistance for freezing and thawing is improved by Fine aggregate/Waste foundry sand ratio which is 50%, 25%, 0% in a row.
한국어 교육을 위한 수량사구 연구: -말뭉치 분석을 중심으로-
윤희수 ( Yun Hui-su ),이선웅 ( Yi Seon-ung ) 한민족문화학회 2018 한민족문화연구 Vol.62 No.-
한국어에서 수량사구는 수사, 단위명사, 수량화 대상 명사 등의 다양한 요소가 관여하여 여러 가지 형태로 형성된다. 동일한 의미의 수량 표현이 다양한 유형으로 실현되는 것은 각 유형의 기능과 그것이 사용되는 환경이 다르다는 것을 의미한다. 따라서 한국어 교수· 학습 상황에서 각각 유형과 그것을 사용할 수 있는 상황 및 변별된 의미를 함께 제시해야 한다. 선행 연구에서 분류된 수량사구 유형은 실제 사용하는 결합 가능한 모든 수량사구를 반영하기에는 부족하므로 새로운 수량사구 유형 분류를 제시하였다. 선행 연구의 유형 분류에 ‘묶음 수량사’라는 새로운 유형을 추가하여, 수량사구 유형을 모두 일곱 가지로 분류한 뒤, 이를 말뭉치 분석 기준으로 삼았다. 수량화 대상 명사가 수량사구 안에 실현되느냐에 따라 ‘단일 구성’과 ‘복합 구성’으로 나누었고, ‘복합 구성’은 다시 수량화 대상 명사의 성격과 위치에 따라 ‘묶음 수량사’, ‘후행 구성’, ‘선행 구성’으로 나누었다. 말뭉치 분석을 통해 쓰임이 제한적인 수량사구를 제외하고, 수량사구 유형을 총 6가지로 설정하였다. 실제 언어생활에서 나타난 수량 표현의 모습을 바탕으로 수량사구의 유형별 특징을 분석하고, 객관적인 수치와 함께 제시하였다. 이는 효율적인 수량사구 교수를 위한 교육 문법으로서 의의가 있다. In Korean, the numeral phrase consists of multiple elements such as number words, unit nouns, and quantification target nouns. Various numeral phrases differ in meaning, function, and environment in which they are used in the sentence. It is necessary to define the proper context for using the numeral phrases in Korean teaching and learning situations. Previous works did not reflect all the possible combinations for numeral phrases. In this work, we aim to rebuild the classification of the numeral phrases and describe the features and meanings for each category focusing on corpus analysis. we classified the numeral phrases in six classes and developed a new class based on bundled quantity; mainly we divided into two main categories that we named single and complex composition respectively. The previous categories composed the first level of hierarchical structure that evaluated if the numeral phrases include quantification target noun. We derived complex composition, into bundled quantity, pre-composition, and postcomposition categories by the nature and location of the quantification target nouns in the sentence. As a result of our study, the proposed classification expanded the study of numeral phrases by analyzing corpus data and emphasized its significance as a primary work for the pedagogical grammar for the numeral phrases.
군청안료의 합성에 있어서 반응 메카니즘에 관한 기초적 연구
황선국,유연태,최영윤,홍성웅,Hwang, Seon-Guk,Yu, Yeon-Tae,Choe, Yeong-Yun,Hong, Seong-Ung 한국재료학회 1997 한국재료학회지 Vol.7 No.10
본 연구에서는 고령토, 유황, 탄산나트륨, 규석 및 송진을 원료로 하여 군청을 합성하였고, 그 반응 메카니즘을 조사하였다. 원료의 혼합시료는 군청의 중간 생성물인 녹색군청을 합성하기 위하여, 82$0^{\circ}C$에서 4시간 동안 소성하였다(승온율 2$^{\circ}C$/min). 합성된 녹색군청은 최종적으로 군청을 얻기 위해 50$0^{\circ}C$에서 산화처리하였다. 합성 과정에서 발생하는 반응 생성물 및 이들의 구조적 변화는 x선 회절 분석과 Raman Spectrum 분석에 의하여 평가하였다. 소성과정에서 황화나트륨은 50$0^{\circ}C$에서 생성되었고, NaAISiO$_{4}$는 62$0^{\circ}C$에서 형성되었다. 그리고, 녹색군청은 황화나트륨과 NaAISiO$_{4}$의 반응에 의하여 74$0^{\circ}C$부근에서 형성하기 시작하였다. 또한, 청색군청의 형성은 녹색군청 중에 잔존하던 황화타트륨의 산화로 방출되는 유황 원자에 기인하였다.
VCR 헤드 제조시 $SiO_2$박막과 유리의 계면 결함
윤능구,황재웅,고경현,안재환,제해준,홍국선,Yun, Neung-Gu,Hwang, Jae-Ung,Go, Gyeong-Hyeon,An, Jae-Hwan,Je, Hae-Jun,Hong, Guk-Seon 한국재료학회 1994 한국재료학회지 Vol.4 No.1
Mn-Zn ferrite를 가공하여 VCR헤드의 제조과정에서 비자성체 gap용 $SiO_{2}$증착층과 유리와의 접합시 유리내에 기포 형태의 결함이 발생하는 경우가 있다. 기판의 조도나 $SiO_{2}$의 증착속도의 영향을 분석한 결과, 기포의 생성원인이 $SiO_{2}$ 증착층과 접합유리의 융착시 계면에 존재하는 요철의 불완전한 충진에 의한 것으로 나타났다. 따라서 이러한 기포생성을 억제시키는 위해서는 기판을 최대한 경면 연마시켜 표면조도를 작게하고 $SiO_{2}$증착속도를 조절함으로써 $SiO_{2}$증착층의 표면조도를 작게하여 유리 융착시 계변의 요철 크기를 작게해야 한다. 기판을 0.05$\mu\textrm{m}$알루미나 분말로 경면연마시키고, 10% Osub 2/분압을 갖는 Ar plasma상태하로 조절된 증착속도로 즈악된 $SiO_{2}$증착층과 접합유리의 융착시 기포가 전혀 발생치 않았다. The bonding behavior of $SiO_{2}$ thin film and glass during VCR head fabrication was investigated, varying the surface roughness of substrate and the sputtering parameter. Insufficient fillings of grooves In the $SiO_{2}$ film with glass was postulated to give rise to the generation of bubble in the glass. The surface roughness of $SiO_{2}$ film was found to depend on that of substrate. The lower the deposition rate, the smoother the surface of film. The bubble free glass after bonding could be obtained using substrate polished with 0.05$\mu\textrm{m}$ $Al_2O_3$ powder under the sputtering condition of 10% oxygen pressure.