Correction: Bioinspired M-13 bacteriophage-based photonic nose for differential cell recognition

Moon, Jong-Sik,Kim, Won-Geun,Shin, Dong-Myeong,Lee, So-Young,Kim, Chuntae,Lee, Yujin,Han, Jiye,Kim, Kyujung,Yoo, So Young,Oh, Jin-Woo Royal Society of Chemistry 2017 Chemical Science Vol.8 No.2

<P>Correction for ‘Bioinspired M-13 bacteriophage-based photonic nose for differential cell recognition’ by Jong-Sik Moon <I>et al.</I>, <I>Chem. Sci.</I>, 2017, DOI: 10.1039/c6sc02021f.</P>

위절제술 환자의 표준진료지침 개발 및 적용 효과

김은희,김철규,이순교,김순덕,이혜옥,권정순,이경미,이민미,심순미,유용만,신종식,강은희,이상일,김병식,오성태,육정환,박수길 한국의료QA학회 2003 한국의료질향상학회지 Vol.10 No.2

Background : Gastric cancer is the most common malignant tumor in Korea. surgical operation is one of the major treatment modalities for gastric cancer patients. Therefore, gastrectomy is one of the most common procedures in General Surgery. There were variation in length of hospital stay and medical treatment for gastrectomy between three surgeons at Asan Medical Center. Clinical pathways have received considerable attention as a tool for recucing the medical practice variation, increasing the efficiency of care process, and improving the quality of care. The aim of this study was to evaluate the effect of a clinical pathway for gastrectomy in gastric cancer patients. Methods : The clinical pathway for gastrectomy was developed and implemented by a multidisciplinary group in Asan Medical Center. A computerized clinical pathway program was developed and revised after a pilot test. A total of 145 patients underwent gastrectomy by three surgeons at Asan Medical Center. We compared the length of hospital stay, patient satisfaction, and unplanned readmission rate between the pre-pathway group(n=67) and the post-pathway group(n=78). We also investigated the degree of satisfaction among the physicians and nurses who were main end-users of the clinical pathway. Results : The clinical pathway was applied to all target patients. The average length of hospital stay was shortened from 12.7days to 10.6days(p<0.01). The degree of patient satisfaction with the care process changed from 90.3% to 89.2% after the implementation of the clinical pathway, but the difference was of satistically significant(p=0.761). Unplanned readmission rate was 2.9% in the pre-pathway group. More than 90% of physicians and nurses answered that the clinical pathway had been a useful tool in their medical practice. Conclusions : The findings of the study demonstrated that implementation of the clinical pathway for gastrectomy produced substantial reduction in the length of hospital stay while improving the quality of patient outcomes. The computerized clinical pathway program can be used as one of the powerful patient management tools for reducing the practice variations and increasing the efficiency of care process in Korea hospital settings.

당뇨병성 합병증을 가진 환자에서 혈증 Erythropoietin 농도

김동규,유기동,허광식,김상용,윤성호,조영신,권용은,김태원,김건영,정종훈,배학연 조선의대 1998 The Medical Journal of Chosun University Vol.23 No.1

플라즈마 이온주입기에서의 시변환 쉬스 연구

김곤호,김건우,김영우,최영도,김종식,김상진,한승희,홍문표 漢陽大學校 工學技術硏究所 1998 工學技術論文集 Vol.7 No.1

Abstract- In a plasma source ion implantation, the target is successively biased by negative voltage pulses with an intrinsic finite rise time, resulting in the time-dependent sheath formation around the target. Measurement of time-dependent sheath during the pulse rise show the ion matrix sheath development which is in proportion to square root of time and pulse rise rate over plasma density but independent of the ion mass.

조혈모세포이식 환자에서 침습성 진균 감염에 대한 Micafungin의 예방 효과 및 안전성

김시현,이동건,최수미,권재철,박선희,최정현,유진홍,이성은,조병식,김유진,이석,김희제,민창기,조석구,김동욱,이종욱,민우성,박종원 대한감염학회 2010 감염과 화학요법 Vol.42 No.3

Background: Micafungin, a potent inhibitor of 1,3-β-D-glucan synthase, is a novel antifungal agent of the echinocandin class. In vitro study showed that micafungin was effective against Aspergillus species as well as Candida species, but clinical data on the prophylactic efficacy against invasive fungal infections (IFIs) other than candidiasis are still lacking. Materials and Methods: We identified 60 consecutive adult hematopoietic stem cell transplantation (HSCT) recipients who received at least 3 doses of micafungin during neutropenic period. Micafungin was started as an alternative in patients who were intolerant or had adverse events (AEs) to primary prophylactic antifungal agents. We retrospectively reviewed the medical records and analyzed the efficacy and safety of micafungin for prophylaxis against IFIs. Results: The patients either had autologous (n=9) or allogeneic (n=51: 1 syngeneic, 24 sibling, 26 unrelated donor) HSCT. Itraconazole oral solution (n=58) was the most frequently used first line antifungal agent for prophylaxis and was administered for median 11 days. The most frequent cause of switch to micafungin was vomiting (n=42). The duration of neutropenia and micafungin administration was median 13 and 12 days, respectively. A successful outcome was achieved in 45 (75%) patients. Empirical antifungal therapy was initiated in 13 (22%) patients. There were 2 cases (3.3%) of breakthrough fungal infections which comprised a probable invasive pulmonary aspergillosis and a possible invasive fungal sinusitis. There was no case of invasive candidiasis. A total of 53 (88%) patients experienced at least one AE regardless of causality during micafungin administration. The most frequent AEs were hypokalemia, vomiting, diarrhea, and elevated serum aspartate aminotransferase or alanine aminotransferase. Among the aforementioned AEs, only 1 case of diarrhea could be classified as a probable relation with micafungin when causality was assessed. There was no AEs that caused discontinuation of micafungin. Conclusions: Micafungin seems to be a safe and effective agent for prophylaxis of IFIs including aspergillosis as well as candidiasis in HSCT recipients. However, further large, prospective, and randomized comparative studies are warranted for aspergillosis.

Callus distraction method를 이용한 하악골 신장술 : 계단골절단술식의 적용

김명진,윤필영,신동준,김수경,김종원,김규식 대한악안면성형재건외과학회 2000 Maxillofacial Plastic Reconstructive Surgery Vol.22 No.2

Since callus distraction technique was applied clinically for the correction of dentofacial deformity to the patients with hemifacial dysplasia by McCarthy in 1992, many surgeons have tried to apply this method to the maxillofacial region. But this technique has some drawbacks. One of the disadvantages of this technique is extensive scar formation in the facial area, which is a sequelae of extraoral approach for supraperiosteal dissection of the periosteum overlying the mandible. Recently, we have made an effort to perform this technique through intraoral approaches to prevent scar formation on the submandibular area and modified the design of the osteotomy, that is step osteotomy technique, to increase the raw bone surface on both osteotomized segments. The rationale for the application of this step osteotomy technique is to increase the amount of regeneracted bone and the length of distraction, to avoid damage of inferior alveolar neurovascular bundle, and to increase initial stability of the splitted segments. Step osteotomy procedure can be done with fine micro-osteotomy saw through subperiosteal tunneling. Extraoral pins should be inserted before making the osteotomy. Since 1974 we have applied this technique at 8 sites In 5 patients with mandibular deficiencies: 2 cases of hemifacial microsomia, 1 case of developmental facial asymmetry and 2 cases of mandibular bony defect. Mandibular elongation have been achieved from 12 to 20mm in length. 1 out of 8 site, we experienced non-union in the case of mandibular body defect. Some skeletal relapse and growth retardation phenomenon have been observed in some cases with the longest follow-up of 48 months.

매복된 상악 중절치의 교정적 견인을 이용한 치험례 : CASE REPORT

김종식,김은정,김현정,남순현,김영진 大韓小兒齒科學會 2005 大韓小兒齒科學會誌 Vol.32 No.1

치아 매복이란 여러 가지 이유로 구강 점막이나 악골내에서 치아가 맹출하지 못하고 있는 상태를 의미한다. 상악 중절치 매복의 원인은 치아종, 과잉치, 공간의 상실, 선행유치의 만기잔존 또는 조기상실, 선행유치의 외상으로 인한 치관이나 치근의 기형, 치배의 이소위치 등이 있다. 매복된 상악 중절치의 경우, 측절치가 빠르게 근심으로 이동하여 공간을 상실하고, 정중선의 변이가 발생하며, 낭종을 형성할 가능성도 있다. 따라서, 매복치의 조기 진단과 그에 따른 적절한 처치가 즉각적으로 이루어져야 한다. 일반적으로 매복의 정도가 심하지 않거나, 각화조직에 의해 매복이 초래된 경우 외과적인 노출만으로도 맹출을 유도할 수 있지만, 외과적인 노출후에 일정기간의 관찰에도 맹출이 되지 않는다거나, 치아의 맹출 방향이 자가 교정될수 없을 정도로 심하게 변위되어 있는 경우, 매복의 위치가 너무 심부에 있는 경우에는 교정적 견인을 시도하는 것이 바람직하다. 본 증례는 매복된 상악 중절치 중 일정기간의 주기적 관찰후 맹출이 기대되지 않았기에, 교정적으로 견인하여 치료하였으며, 치료후 다소의 지견을 얻었기에 보고하는 바이다. A tooth impaction means a state that a tooth does not erupt out of oral mucosa or alveolar bone for many reasons. The reasons for an impaction of the Maxillary central incisor are an odontoma, supernumerary tooth, space loss, prolonged remaining or early loss of a preceding deciduous tooth, abnormalities of crown or root caused by trauma of a deciduous tooth and an ectopic position of a tooth germ. In the case of the impacted maxillary incisor, a rapid mesial movement of a lateral incisor leads a space loss and a midline deviation can be happened. Furthermore, it can cause a cyst. When we treated a patient with an impacted central incisor early, we could see a better prognosis. It means an early diagnosis and an exact treatment are very important. Generally if the impaction is not severe or it is caused by a keratinized covering tissue, a surgical exposure can induce an eruption easily but an orthodontic force is recommended when an eruption does not happen after a surgical method, when the eruption path is too transpositioned to be corrected spontaneously and when an impacted tooth is located so deeply. In the treatment using an orthodontic force, careful considerations about a root length, pulp, and a periodontal tissue can improve the periodontal and esthetic prognosis for the long follow-up results. This case is using an orthodontic traction following a periodic observation and in no expectation of spontaneous eruption. After treatment of this case, I have got some knowledges, so I report this case.

정전위 SSRT법에 의한 해양구조물용 Cu함유 고장력저합금강의 수소취성한계전위 규명에 관한 연구

김성종,박태원,심인옥,김종호,김영식,문경만 한국해양대학교 해양과학기술연구소 2001 硏究論文集 Vol.10 No.1

A marine structural material was well known to have high tensile strength, good weldability and proper corrosion resistance . Cu-containing high strength low alloy (HSLA) steel was recently developed for their purposes mentioned above, And the steel is free about preheating for welding, therefore it is reported that shipbuilding cost by using it can be saved more or less. However the marine structural materials like Cu-containing HSLA steel are being generally adopted with cathodic protection method in severe corrosive environment like natural sea water but the high strength steel may give rise to Hydrogen Embrittlement due to over protection at high cathodic current density for cathodic protection. In this study, Cu-containing HSLA steel using well for marine atructure was investigated about the susceptibility of Hydrogen Embrittlement as functions of tensile strength, strain ratio, fracture time, and fracture mode, etc. and an optimum cathodic protection potential by slow strain rate test(SSRT) method as well as corrosion properties in natural sea water. And its corrosion resistance was superior to SS400 steel , but Hydrogen Embrittlement susceptibility of Cu-containing HSLA steel was hider than that of SS400 steel. However Hydrogen Embrittlement of its steel by SSRT method was showed with pheonomena such as decreasing of fracture time. strain ratio and fracture mode of QC (quasi-cleavage) Eventually it is suggested that an optimum cathodic protection potential not presenting Hydrogen Embrittlement of Cu-containing of HSLA steel by SSRT method was from-770mV(SCE) to - 900mV(SCE) under natural sea water. (Received September 21, 2000)

Curcumin ameliorates cadmium-induced nephrotoxicity in Sprague-Dawley rats

Kim, Kyeong Seok,Lim, Hyun-Jung,Lim, Jong Seung,Son, Ji Yeon,Lee, Jaewon,Lee, Byung Mu,Chang, Seung-Cheol,Kim, Hyung Sik Elsevier 2018 Food and chemical toxicology Vol.114 No.-

<P><B>Abstract</B></P> <P>Chronic exposure to cadmium (Cd) causes remarkable damage to the kidneys, a target organ of accumulated Cd after oral administration. The aim of the present study was to investigate the protective effect of curcumin against Cd-induced nephrotoxicity. Sprague–Dawley male rats were divided into the following four treatment groups: control, curcumin (50 mg/kg, oral), CdCl<SUB>2</SUB>, (25 mg/kg, oral), and pre-treatment with curcumin (50 mg/kg) 1 h prior to the administration of CdCl<SUB>2</SUB> (25 mg/kg, oral) for 7 days. At 24 h after the final treatment, the animals were killed, and the biomarkers associated with nephrotoxicity were measured. Our data indicated that blood urea nitrogen (BUN) and serum creatinine (sCr) levels were significantly reduced by curcumin pre-treatment in CdCl<SUB>2</SUB>-treated animals. Histopathological studies showed hydropic swelling and hypertrophy of the proximal tubular cells in the renal cortex after Cd treatment. Pretreatment with curcumin ameliorated the histological alterations induced by Cd. The urinary excretion of kidney injury molecule-1 (Kim-1), osteopontin (OPN), tissue inhibitor of metalloproteinases 1 (TIMP-1), neutrophil gelatinase-associated lipocalin (NGAL), and netrin-1 significantly reduced by curcumin treatment compared to that in the CdCl<SUB>2</SUB>-treated group. The administration of curcumin provided a significant protective effect against Cd-induced nephrotoxicity.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Curcumin protects against cadmium-induced renal injury. </LI> <LI> Curcumin reduces urinary excretion of AKI biomarkers. </LI> <LI> Curcumin protects against cadmium-induced apoptosis in the kidney. </LI> </UL> </P>

피스톤 가공용 CNC 선반 HOT-1000 개발에 관한 연구

김경석,김종관,김상복,김성식,정현철,이도윤 한국공작기계학회 1996 한국생산제조학회지 Vol.5 No.2

The purpose of this study is the development of a lathe which can cut any pistons of oval shape with high speed, accuracy and precision by CNC (computer Numerical Control) method. Y axis which is the mechanism of position determination with high speed response has been aded to the CNC lathe and ovality and profile has been cut under the synchronous control of C-Y-Z axes. In the case of ovality of Φ0.5mm, the productivity can be improved up to 1500rpm by high speed cutting than modeling method.