족저압력분포 측정장비를 이용한 골프 스윙시 족저압 분석

이동기,이중숙,이범진,이훈식,김용재,박승범,주종필 한국운동역학회 2005 한국운동역학회지 Vol.15 No.1

D. K. LEE, J. S. LEE, B. J. LEE, H. S. LEE, Y. J. KIM, S. B. PARK, J. P. JOO. PIantar foot pressure analysis during golf swing motion using plantar foot pressure measurement system. Korean Journal of Sport Biomechanics, Vol. 15, No. 1, pp. 75-89, 2005. In this study, weight carrying pattern analysis and comparison method of four foot region were suggested. We used three types of club(driver, iron7, pitching wedge). This analysis method can compare between top class golfer and beginner. And the comparison data can be used to correct the swing pose of trainee. If motion analysis system, which can measure the swing speed and instantaneous acceleration at the point of hitting a ball, is combined with this plantar foot force analysis method, new design development of golf shoes to increase comfort and ball flight distance will be available. 1. Address acting, forces concentrated in rare foot regions and lateral foot of right foot. Back swing top acting, relatively high force occurred in medial forefoot region of left foot and forefoot region of right foot. Impact acting, high force value observed in the lateral rarefoot region of left foot and medial forefoot region of right foot. Finish acting, force concentration observed on the lateral region and rarefoot region of left foot. 2. Forces were increased in address of right foot with clubs length increased. All clubs, back swing top acting, high force value observed in the lateral forefoot region of right foot. All clubs, in impact, high force value observed in the lateral rarefoot region of left foot and medial forefoot region of right foot. Finish acting, force concentration observed on the rarefoot region in driver and lateral foot region in iron on left foot. 3. Right foot forces distribution were increased in address, back swing top and left foot force distribution were increased in impact, finnish

NGS_SNPAnalyzer: a desktop software supporting genome projects by identifying and visualizing sequence variations from next-generation sequencing data

Dong‑Jun Lee,Taesoo Kwon,Chang‑Kug Kim,Young‑Joo Seol,Dong‑Suk Park,Tae‑Ho Lee,Byung‑Ohg Ahn 한국유전학회 2020 Genes & Genomics Vol.42 No.11

Background Sequence variations such as single nucleotide polymorphisms are markers for genetic diseases and breeding. Therefore, identifying sequence variations is one of the main objectives of several genome projects. Although most genomeproject consortiums provide standard operation procedures for sequence variation detection methods, there may be differencesin the results because of human selection or error. Objective To standardize the procedure for sequence variation detection and help researchers who are not formally trainedin bioinformatics, we developed the NGS_SNPAnalyzer, a desktop software and fully automated graphical pipeline. Methods The NGS_SNPAnalyzer is implemented using JavaFX (version 1.8); therefore, it is not limited to any operatingsystem (OS). The tools employed in the NGS_SNPAnalyzer were compiled on Microsoft Windows (version 7, 10) andUbuntu Linux (version 16.04, 17.0.4). Results The NGS_SNPAnalyzer not only includes the functionalities for variant calling and annotation but also providesquality control, mapping, and filtering details to support all procedures from next-generation sequencing (NGS) data to variantvisualization. It can be executed using pre-set pipelines and options and customized via user-specified options. Additionally,the NGS_SNPAnalyzer provides a user-friendly graphical interface and can be installed on any OS that supports JAVA. Conclusions Although there are several pipelines and visualization tools available for NGS data analysis, we developedthe NGS_SNPAnalyzer to provide the user with an easy-to-use interface. The benchmark test results indicate that theNGS_SNPAnayzer achieves better performance than other open source tools.

SNL-EFDC를 이용한 군산항 유사퇴적고 계산의 비교 연구

이동주 ( Dong-joo Lee ),송상현 ( Sang-hyun Song ) 한국환경기술학회 2015 한국환경기술학회지 Vol.16 No.4

본 논문은 Ziegler, Lick, and Jones에 의해 개발된 SEDZLJ라 부르는 유사역학 알고리즘이 계산되는 SNL-EFDC 모델을 이용하여 군산항의 퇴적고 계산에 관하여 연구하였다. SEDZLJ모듈은 SEDflume 이나 Annular flumes로부터 얻은 현장 침식률 및 침식 한계전단응력 자료를 직접 결합할 필요가 있다. 군산항에서는 SEDflume 자료를 구할 수 없기 때문에 Ryu와 Yim에 의한 Annular flumes 실험으로부터 얻은 현장 침식률 및 침식 한계전단응력 자료를 이용하였다. SNL-EFDC 모델이 군산항의 유사퇴적고를 계산하기 위해 적용되었고 관측된 부유사 농도와 퇴적고를 사용하여 검증되었다. 유사 퇴적고 계산에 대한 모델의 적용성은 NSEC가 0.72로 침식과 퇴적의 물리적 변화가 적절하게 재현됨이 입증되었다. 부가적으로 검증된 모델은 저면 활성층두께에 대한 매개변수 α값의 영향을 조사하기 위해 사용되었고, Lee와 Park에 의해 수행된 SEDTM을 이용한 유사이동 계산의 결과와 비교하기 위해 사용되었다. 그 결과, 매개변수 α값의 변화는 유사퇴적고 계산에 미미한 영향이 미치는 것으로 나타났다. SEDZLJ에 의한 결과를 SEDTM의 것과 비교할 때 SEDZLJ모듈이 군산항에서 SEDTM 보다 NSEC가 0.03향상 되어 토사이송 과정을 재현함이 확인되었다. This paper was studied on the sediment deposition height computation at Gunsan port using recently advanced SNL-EFDC model which the sediment dynamics algorithm was called as SEDZLJ developed by Ziegler, Lick and Jones. SEDZLJ module needs to directly incorporate site-specific erosion rate and critical shear stress data from SEDflume or Annularflumes. Here this model attempted to use site-specific erosion rate and critical shear stress data from Annular flumes experiment by Ryu and Yim instead of unavailable SEDflume data at Gunsan port. SNL-EFDC was applicated to calculate deposition height at Gunsan port and verified using observed values for suspended sediment concentration and sediment deposition height. The model applicability for sediment deposition height computation was evaluated as NSEC 0.72 and verified that it reproduced the physical variations of erosion and deposition. In addition, the verified model was used to investigate the effect of parameter “α” on the active bed layer thickness and used to compare with the result of sediment transport computation using SEDTM done by Lee and Park. As a result, it was found that the change of parameter “α” value has a negligible effect on sediment deposition height computation. As results of SEDZLJ are compared with those of SEDTM, it was identified that SEDZLJ module reproduces the sediment transport process more appropriately than SEDTM at Gunsan port with advanced NSEC 0.03.

진도(전라남도, 진도군)의 거미상

김주필(Joo Pil Kim),지승환(Seung Hwan Ji),이형민(Hyung Min Lee),이형진(Hyung Jin Lee),이현동(Hyun Dong Lee) 한국거미연구소 2017 한국거미 Vol.33 No.1

2016년 7월 6일부터 8일까지 전라남도 진도군 일대를 한국거미연구회 회원인 김주필, 지승환, 이형민, 이형진, 이현동 등이 채집 조사한 결과 19과 47속 62종의 거미가 조사 연구되어 이에 보고하는 바이다. The author investigated the spiders of Jin island in July 06~08.2016. In the present paper 62 species of 47 genera belongs to 19 families were identified. These specimens are deposited at the Joo-Pil Spider Museum, Namyangju-Si, Gyeonggi-Do.

서초동(서울시 서초구)의 거미상

김주필(Joo Pil Kim),정혜리(Hye ri Jeong),김대희(Dae Hee Kim),박동우(Dong Woo Park),서재웅(Jae Woong Seo),이현우(Hyun woo Lee) 한국거미연구소 2017 한국거미 Vol.33 No.1

2016년 3월 31일부터 7월 31일까지 서울특별시 서초구 서초동에 위치한 서울고등학교 교정 일대를 서울고등학교 환경생물부 부원들이 채집 조사한 결과 20과 43속 53종의 거미가 조사 연구되어 이에 보고하는 바이다. From March 31st to July 31st in 2016, members of an environmental biology club at Seoul High School located in Seocho-gu, Seoul, Dae-Hee Kim, Dong-Woo Park, Jae-Woong Seo and Hyun-woo Lee, collected 20 families 43 genera 53 species of spiders and report the result of the study here.

유착성 관절낭염 치료에 있어서 한방 치료와 양방 치료의 임상적 고찰 : 동서협진 모델 개발을 위한 기초 연구를 중심으로

남동우,정인태,김주희,박유선,임사비나,이두익,이재동,이윤호,최도영 경희대학교 동서의학연구소 2006 東西醫學硏究所 論文集 Vol.2006 No.-

Objectives : To observe the effect of acupuncture treatment and western medical treatment on frozen shoulder patients. Methods : 39 voluntary patients were randomly assigned to the Eastern treatment group(E group, n=22) and the Western treatment group(W group, n=17). The E group received acupuncture treatment on LI15, TE14, GB21 and Master Dong's acupuncture points, Shin-gwan and Gyun-joong, twice a week for 4 weeks. The W group received suprascapular nerve block, subacromial injection and trigger point injection, twice a week for 4 weeks. Both groups were instructed to practice self exercise during their daily lives. Evaluations were made before treatment and after treatment using Constant Shoulder Assessment(CSA), Shoulder Pain and Disability Index(SPADI) and the patient's satisfaction concerning the treatment was measured by Visual Analogue Scale(VAS). The obtained data were analyzed and compared. Results : The E group showed significant improvement(p<0.05) according to the CSA and SPADI. The patient's satisfaction scored 5.67 on a scale of 10. The W group showed significant improvement(p<0.05) according to the CSA and SPADI. The patient's satisfaction scored 7.73. But the difference between the two groups were insignificant according to CSA and SPADI. Conclusion : Both acupuncture and nerve block treatment significantly improved frozen shoulder. But the difference of the two treatments was insignificant.

BEZ235 (PIK3/mTOR inhibitor) Overcomes Pazopanib Resistance in Patient-Derived Refractory Soft Tissue Sarcoma Cells

Kim, Hee Kyung,Kim, Sun Young,Lee, Su Jin,Kang, Mihyeon,Kim, Seung Tae,Jang, Jiryeon,Rath, Oliver,Schueler, Julia,Lee, Dong Woo,Park, Woong Yang,Kim, Sung Joo,Park, Se Hoon,Lee, Jeeyun Neoplasia Press 2016 Translational oncology Vol.9 No.3

<P><I>BACKGROUND:</I> Although pazopanib treatment has become the standard chemotherapy in salvage setting for metastatic sarcoma patients, most patients progress after pazopanib treatment in 4 to 6 months. After failure to pazopanib, patients have limited options for treatment. Therefore, subsequent therapy in patients who failed to pazopanib is urgently needed and the use of patient derived cells or patient derived tumors for accompanying testing with various pharmacological inhibitors could offer additional treatment options for these patients. <I>METHODS:</I> Patient derived tumor cells were collected from ascites at the time of progression to pazopanib and a 13-drug panel was tested for drug sensitivity. We confirmed the results using <I>in vitro</I> cell viability assay and immunoblot assay. We also performed the genomic profiling of PDX model. <I>RESULTS:</I> The growth of patient derived tumor cells was significantly reduced by exposure to 1.0 μM AZD2014 compared with control (control versus AZD2014, mean growth = 100.0% vs 16.04%, difference = 83.96%, 95% CI = 70.01% to 97.92%, <I>P</I> = .0435). Similarly, 1.0 μM BEZ235 profoundly inhibited tumor cell growth <I>in vitro</I> when compared to control (control versus BEZ235, mean growth = 100.0% vs 7.308%, difference = 92.69%, 95% CI = 78.87% to 106.5%, <I>P</I> < .0001). Despite the presence of CDK4 amplification in the patient-derived tumor cells, LEE011 did not considerably inhibit cell proliferation when compared with control (control vs LEE011, mean growth = 100.0% vs 80.23%, difference = 19.77%, 95% CI = 1.828% to 37.72%, <I>P</I> = .0377). The immunoblot analysis showed that BEZ235 treatment decreased pAKT, pmTOR and pERK whereas AZD2014 decreased only pmTOR. <I>CONCLUSION:</I> Taken together, upregulation of mTOR/AKT pathway in sarcoma patient derived cells was considerably inhibited by the treatment of AZD2014 and BEZ235 with downregulation of AKT pathway (greater extent for BEZ235). These molecules may be considered as treatment option in STS patient who have failed to pazopanib in the context of clinical trials.</P>

韓國의 西海 및 南海에 있어서 各港의 潮位頻度分布에 관하여

李東周 군산대학교 1981 群山水産專門大學 硏究報告 Vol.15 No.3

It has been considered the applicability of pearson distribution to tide frequency distribution of harbors in the western and southern sea of Korea with data of tide tables (1981). The results were obtained as follows. 1.Pearson distribution is applicable to tide frequency distribution of harbors in the southern sea, but not to those of harbors in the western sea. 2.It is assured that pearson distribution curves resemble closely tide frequency distribution diagrams on 10 harbors in the southern sea. 3.In the future it is expected their curves obtained from 10 harbors will be useful far design water level.

2상 스테인리스강의 인장특성에 미치는 오스테나이트상의 함량 및 합금원소의 영향

주동원,성장현,이성근 동아대학교 공과대학부설 생산기술연구소 1997 生産技術硏究所硏究論文集 Vol.2 No.1

The effect of alloying elements addition, austenite content and distributions on the tensile properties and corrosion resistance of duplex and super duplex stainless steels has been investigated by changing heat treatment conditions. With the addition of N and Cu, the austenite content of duplex stainless steels increased. After heat treating the super duplex stainless steel, the austenite content increased above 1200℃ and the ferrite single phase temperature shifted to 50℃ high in comparison to duplex stainless steel. Due to the stored energy induced from cold rolling the super duplex stainless steel. the specimen with fibous structure showed to be increased in austenite content compared to the specimen with dispersed structure. Tensile strengths decreased and elongations increased with increasing austenite content. The super duplex stainless steel with fibrous structure showed superior tensile strengths and elongations to the fibrous duplex stainless steel and super duplex stainless steel with dispered structure. The effect of Cu and CU+W addition on tensile properties was small. The passive current density and critical current density of high alloyed super duplex stainless steel showed value in comparison to duplex stainless steel. The Cu+W added super duplex stainless steel appeared the highest corrosion resistance among all specimens.

分岐配水管網의 經濟的 設計에 관한 硏究

李東周 군산대학교 1980 群山水産專門大學 硏究報告 Vol.14 No.3

Based on the method for Least Cost Design of Branched Pipe Network developed by Deb. (1974), Author studied on the simpler equations for the economical design of Branched Pipe Network System and obtained the following results. (1) The total annual cost of the system is the sum of the annual cost of pipes, pumps, pumping station and electric power which can put to the function of a total head loss. An equation for the most economical total head loss is obtained by finding the partial derivatives of the total annual cost with respect to the total head loss. (2) Economical diameters for the all pipes airs calculated by using the Hazen-Williams equation with the economical head losses for the all pipes. (3) An economical pumping head is calculated by adding the economical total head loss to the specified residual head.