http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Nonlocal Formulation for Numerical Analysis of Post-Blast Behavior of RC Columns
Zhong-Xian Li,Bo Zhong,Yanchao Shi,Jia-Bao Yan 한국콘크리트학회 2017 International Journal of Concrete Structures and M Vol.11 No.2
Residual axial capacity from numerical analysis was widely used as a critical indicator for damage assessment of reinforced concrete (RC) columns subjected to blast loads. However, the convergence of the numerical result was generally based on the displacement response, which might not necessarily generate the correct post-blast results in case that the strain softening behavior of concrete was considered. In this paper, two widely used concrete models are adopted for post-blast analysis of a RC column under blast loading, while the calculated results show a pathological mesh size dependence even though the displacement response is converged. As a consequence, a nonlocal integral formulation is implemented in a concrete damage model to ensure mesh size independent objectivity of the local and global responses. Two numerical examples, one to a RC column with strain softening response and the other one to a RC column with post-blast response, are conducted by the nonlocal damage model, and the results indicate that both the two cases obtain objective response in the post-peak stage.
( Yan Xin ),( Zhibin Sun ),( Qiongzhen Chen ),( Jue Wang ),( Yicheng Wang ),( Linfeng Luogong ),( Shuhuan Li ),( Weiliang Dong ),( Zhongli Cui ),( Yan Huang ) 한국미생물 · 생명공학회 2015 Journal of microbiology and biotechnology Vol.25 No.11
A novel alkaline protease from Streptomyces sp. M30, SapHM, was purified by ammonium sulfate precipitation, hydrophobic interaction chromatography, and DEAE-Sepharose chromatography, with a yield of 15.5% and a specific activity of 29,070 U/mg. Tryptic fragments of the purified SapHM were obtained by electrospray ionization quadrupole timeof- flight mass spectrometry. Nucleotide sequence analysis revealed that the gene sapHM contained 1,179 bp, corresponding to 392 amino acids with conserved Asp156, His187, and Ser339 residues of alkaline protease. The first 24 amino acid residues were predicted to be a signal peptide, and the molecular mass of the mature peptide was 37.1 kDa based on amino acid sequences and mass spectrometry. Pure SapHM was optimally active at 80°C in 50 mM glycine-NaOH buffer (pH 9.0), and was broadly stable at 0-50°C and pH 4.0-9.0. The protease relative activity was increased in the presence of Ni2+, Mn2+, and Cu2+ to 112%, 113%, and 147% of control, respectively. Pure SapHM was also activated by dimethylformamide, dimethyl sulfoxide, Tween 80, and urea. The activity of the purified enzyme was completely inhibited by phenylmethylsulfonyl fluoride, indicating that it is a serine-type protease. The Km and Vmax values were estimated to be 35.7 mg/ml, and 5 × 104 U/mg for casein. Substrate specificity analysis showed that SapH was active on casein, bovine serum albumin, and bovine serum fibrin.
Study of the Ultimate Load Capacity of K-Type Tube-Gusset Plate Connections
Yan-Zhong Ju,Jia-Yang Li,De-Hong Wang,Jun-Feng Bai 한국강구조학회 2018 International Journal of Steel Structures Vol.18 No.2
In order to investigate the ultimate load capacity of K-type tube-gusset plate connections with stiff ened plate, the static tests of fi ve full-scale specimens were conducted in this study. The results indicate that the end stiff ened plate is critical for improving the load capacity of the connections. In addition, the parametric nonlinear fi nite element analysis of the K-type tube-gusset plate specimens was performed with account of such non-dimensional parameters as chord diameter-to-thickness ratio ( γ ), plate width-to-chord diameter ratio ( α ), plate thickness-to-chord thickness ratio ( 1 ), stiff ened plate thickness ( t d ), and nominal-to-yield stress ratio ( η ). The above analysis implies that the ultimate load capacity decreases with the increment of γ and increases with the increment of α and 1 , while it is only slightly aff ected by the stiff ened plate thickness. Compare the results of the fi nite element analysis with assessment by design guides existing. Based on the former results, an equation for estimating the load capacity of K-type tube-stiff ened gusset plate is proposed.
Yan, Changzeng,Xue, Xiaolan,Zhang, Wenjun,Li, Xiaojie,Liu, Juan,Yang, Songyuan,Hu, Yi,Chen, Renpeng,Yan, Yaping,Zhu, Guoyin,Kang, Zhenhui,Kang, Dae Joon,Liu, Jie,Jin, Zhong unknown 2017 Nano energy Vol.39 No.-
<P><B>Abstract</B></P> <P>To produce hydrogen and oxygen from photocatalytic overall splitting of pure water provides a promising green route to directly convert solar energy to clean fuel. However, the design and fabrication of high-efficiency photocatalyst is challenging. Here we present that by connecting different nanostructures together in a rational fashion, components that cannot individually split water into H<SUB>2</SUB> and O<SUB>2</SUB> can work together as efficient photocatalyst with high solar-to-hydrogen (STH) energy conversion efficiency and avoid the use of any sacrificial reagent. Specifically, Te/SnS<SUB>2</SUB>/Ag artificial nanoleaves (ANLs) consist of ultrathin SnS<SUB>2</SUB> nanoplates grown on Te nanowires and decorated with numerous Ag nanoparticles. The appropriate band structure of Te/SnS<SUB>2</SUB> p-n junctions and the surface plasmon resonance of Ag nanoparticles synergistically enhance the quantum yield and separation efficiency of electron-hole pairs. As a result, Te/SnS<SUB>2</SUB>/Ag ANLs enable visible-light driven overall water-splitting without any sacrificial reagent and exhibit high H<SUB>2</SUB> and O<SUB>2</SUB> production rates of 332.4 and 166.2μmolh<SUP>−1</SUP>, respectively. Well-preserved structure after long-term measurement indicates its high stability. It represents a feasible approach for direct H<SUB>2</SUB> production from only sunlight, pure water, and rationally-designed ANL photocatalysts.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Te/SnS<SUB>2</SUB>/Ag ANLs heterostructure is prepared to catalyze overall water splitting. </LI> <LI> The catalyst show impressive H<SUB>2</SUB> and O<SUB>2</SUB> production rate under visible light. </LI> <LI> The structure and efficiency of catalyst shows no degradation after 10 days. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>