http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Yunwoo Jung,Nalae Lee,Jonghoon Kim,Yeong Ji Im,조상완 한국진공학회 2015 Applied Science and Convergence Technology Vol.24 No.5
The interfacial electronic structure between zinc phthalocyanine (ZnPc) and aluminumdoped zinc oxide (AZO) substrates has been evaluated by ultraviolet photoemission spectroscopy and angle-dependent x-ray absorption spectroscopy to understanding the molecular orientation of a ZnPc layer on the performance of small molecule organic photovoltaics (OPVs). We find that the ZnPc tilt angle improves the π-π interaction on the AZO substrate, thus leading to an improved short-circuit current in OPVs based on phthalocyanine. Furthermore, the molecular orientation-dependent energy level alignment has been analyzed in detail using ultraviolet photoemission spectroscopy. We also obtained complete energy level diagrams of ZnPc/AZO and ZnPc/indium thin oxide.
Non-periodic Subway Scheduling that Minimizes Operational Cost and Passenger Waiting Time
YunWoo Hong(홍연우),Yerim Chung(정예림),YunHong Min(민윤홍) 한국컴퓨터정보학회 2018 韓國컴퓨터情報學會論文誌 Vol.23 No.8
Subway metro scheduling is one of the most important problems impacting passenger convenience today. To operate efficiently, the Seoul metro uses regular, periodic schedules for all lanes, both north and southbound. However, many past studies suggest that non-periodic scheduling would better optimize costs. Since the Seoul metro is continuously facing a deficit, adopting a non-periodic schedule may be necessary. Two objectives are presented; the first, to minimize the average passengers’ waiting time, and the second, to minimize total costs, the sum of the passenger waiting time, and the operational costs. In this paper, we use passenger smart card data and a precise estimation of transfer times. To find the optimal time-table, a genetic algorithm is used to find the best solution for both objectives. Using Python 3.5 for the analysis, for the first objective, we are able to reduce the average waiting time, even when there are fewer trains. For the second objective, we are able to save about 4.5 thousand USD with six fewer trains.
A Study on the Long-Term Measurement Data Analysis of Existing Cable Stayed Bridge Using ARX Model
Yunwoo Lee,장민서,김승준,강영종 한국강구조학회 2020 International Journal of Steel Structures Vol.20 No.6
Various sensors have been installed in cable-stayed bridges to monitor the behavior of structures and external conditions. These sensors alert the administrator to take appropriate action when an abnormal signal is detected. Although inherent meaningful information about the history of structural responses in long-term accumulated measurement data are available, the methodology for utilizing such data in the long-term point of view has not yet been established. Structural response is determined by the mechanical principle of external loads and the structural system characteristics. Assuming that structural responses have a certain pattern in a constant condition, the state of the structure can be estimated to have changed or not through an analysis of the pattern variation of the measured data. This study utilizes the temperature and displacement data of a cable-stayed bridge to analyze the pattern variation of the measurement data. An autoregressive model is used to defi ne the pattern of the time series data. A pattern model is then constructed with the data adopted as a reference for comparison. The compared data are applied to the pattern model to simulate the data refl ecting the reference data pattern. Subsequently, the simulated data are compared with the actual data, and the pattern diff erence is computed through the error discriminant index
정윤우(Yunwoo Jeong),김한종(Han-Jong Kim),남택진(Tek-Jin Nam) 한국HCI학회 2020 한국HCI학회 학술대회 Vol.2020 No.2
움직임과 인터랙션이 있는 인터랙티브 오토마타는 계산적 사고를 교육하기 위한 수단으로 활용되고 있다. 인터랙티브 오토마타 제작을 통해 학생들은 다양한 지식과 경험을 습득할 수 있다. 하지만 사전 지식이나 경험 없이 인터랙티브 오토마타의 움직임과 인터랙션을 설계하고 제작하는 것은 어렵다. 직관적이지 못한 설계 방법과 제작하는 과정에서 생기는 문제 때문에 많은 시행착오를 겪는다. 본 논문에서는 인터랙티브 오토마타의 움직임과 인터랙션의 설계와 제작을 돕는 증강현실 도구를 소개한다. 증강현실 도구는 키보드와 마우스 없이도 움직임과 인터랙션을 설계할 수 있도록 돕고 투사되는 정보를 활용해 시뮬레이션하고 제작을 할 수 있도록 구성하였다. 예시 시나리오를 통해 도구를 사용하는 방법에 대해 설명하고 초기 개발을 통해 얻은 시사점과 향후 연구방향에 대해 논한다.
Mechanism Board: 움직이는 링크 기구를 테스트하기 위한 탠저블 메커니즘 디자인 도구
정윤우(Yunwoo Jeong),남택진(Tek-Jin Nam) 한국HCI학회 2017 한국HCI학회 학술대회 Vol.2017 No.2
최근 인터랙티브 제품 및 시스템 디자인 분야에서 움직임이 있는 피지컬 컴퓨팅이 많이 쓰이면서 자유로운 움직임을 나타낼 수 있는 링크 기반 메커니즘이 중요해지고 있다. 하지만 링크 기반 메커니즘을 제작하는 과정에서는 많은 시행착오를 겪게 된다. 이는 제작 시간을 지연시켜 충분한 테스트를 하지 못하게 한다. 본 논문에서 우리는 움직이는 링크기구를 테스트하기 위한 탠저블 메커니즘 도구인 Mechanism Board 를 소개한다. 기구 설계 이후 쉽고 빠른 링크 기구의 테스트를 위해 링크 기반 메커니즘 설계 소프트웨어와 연계 가능하도록 시스템을 구성하였으며 그 시스템에 맞는 새로운 탠저블 디자인 도구를 개발하고 소프트웨어를 일부 수정하였다. Mechanism Board 의 기능을 평가하고 개선점을 찾기 위해 초기 평가를 실시하였으며 그 결과 앞으로의 개발을 통해 Mechanism Board 가 움직이는 기구를 프로토타이핑 할 때 시행착오를 겪는 시간을 줄여 디자이너에게 도움을 줄 것으로 예상된다.