CG실험에 의한 실내마감재의 평가 예측 모델 작성

이진숙,진은미,박유미 대한건축학회 2003 대한건축학회논문집 Vol.19 No.2

The purpose of this study is to evaluate the features of the finishing material according to their type and color. The purpose of this in order is to improve the pleasantness of the interior, by using the proper finishing materials, in planning the interior, and to apply it to framing the prediction model for practical use in interior design, This stud was conducted by evaluating experiment manufactured with the CG(Computer Graphics). The process of the study is as follows, 1) The finishing materials used in the interior based on the previous study was classified. The color range of the selected finishing materials was examined. 2) The evaluation experiment using the CG was conducted on the basis of the selected finishing materials. 3) With that result, the evaluation properties was analyzed according to evaluating variables(that is, the finishing material, hue, value, and chroma) for the interior image. 4) Finally, the prediction model of the interior finishing materials was framed with the image type. Through the Factor Analysis of 19 Adjectives, 8 representative image types such as 「Open·Bright」, 「Gorgeous·Strong」, 「Quiet·Natural」, 「Smooth·Elaborate」, 「Coarse·Rough」, 「Elegant·Refined, 「Warm」」 and 「Cool」 were extracted. The prediction model was framed for the 8 representative image types. The 「Open·Bright」, 「Quiet·Natural」, 「Cool」images are as follows, 1) When you want to produce the 「Open·Bright」image, it is ideal to use wallpaper as finishing material and Y or B in hues. The higher the value and middle chroma you use. The bigger 「Open·Bright」 the efficiency you achieve. 2) When you want to produce the 「Quiet·Natural」 image, it is good to use woods for finishing materials, You can get a better image with the YR or R in hues, with higher value and lower chroma. 3) When you want to produce the 「Cool」image, it is better to use stones for finishing materials. Cool colors and the hue of B, PB, BG are recommended. The lower value and chroma are effective as well.

혈액 및 비장조직에서 일산화탄소 헤모글로빈 농도에 관한 연구 : A Comparison of CO-Hb in Blood and Spleen Specimens

이진훈,오세진,김유나,이진숙,유재훈,장성길 內務部 國立科學搜査硏究所 2001 國立 科學 搜査 硏究所 年報 Vol.33 No.-

폴리에스테르 섬유 감량시스템용 프로세서 타이트레이터 개발

조진호,이흥락,이종현,김명남,구성모,김무영,진경찬,유병희,강민수,김국진 경북대학교 센서기술연구소 1993 연차보고서 Vol.1993 No.-

폴리에스테르 섬유 감량시스템의 제어를 위해서는 처리조 내에서 감량되는 섬유가 목표 감량치에 도달했는지를 판단해 주는 장치가 필요하다. 본 연구에서는 가성소다용액의 초농도 및 섬유 감량 정도의 정확한 측정과 감량 종료시간의 산출 및 이에 따른 종료신호를 발생할 수 있는 폴리에스테르 섬유 감량기 전용의 자동적정장치를 개발하였다. To control caustic soda treatment system for the polyester fabric reduction, we need the device to determine that the fabric has been arrived target reduction value. In this study, we develope an automatic process titrator for the caustic soda treatment system. Major functions of the target titrating system are accurate measurements of the caustic soda concentration and then producing the end point signal for caustic soda treatment system.

급성충수돌기염으로 발현된 방선균증 2예

조진원,송진영,김창억,민영훈,최창순,우흥정,현인규,김종현,유기철,채승완,손진희 대한화학요법학회 2001 대한화학요법학회지 Vol.19 No.1

The Actinomyces species are normal flora of oral cavity and upper intestine characterized as gram-positive, non-spore-forming anaerobic or mjcroaerophilic rods. Actinomycosis is a chronic suppurative and granulomatous disease characterized by abscess, sinus, abundant granulation and mass. The appendix is the commonly involved site among abdominal actinomycosis. Abdominal actinomycosis is often difficult to diagnose before operation because of no reliable clinical features and infrequency of the disease. We report two cases of abdominal actinomycosis which were manifested as acute appendicitis. Those were detected Incidentally tv the pathologist after routine appendectomy. Both patients were successfully treated with appendectomy followed by proper antibiotics use.

논문(論文) : 『상한론(傷寒論)』 비약증(脾約證)의 의미에 대한 소고(小考) -179조와 247조의 비교를 중심으로-

안진희 ( Jin Hee Ahn ),정창현 ( Chang Hyun Jeong ),장우창 ( Woo Chang Jang ),백유상 ( You Sang Baik ) 대한한의학원전학회(구 대한원전의사학회) 2015 대한한의학원전학회지 Vol.28 No.2

Objectives : The purpose of this study is to investigate splenic constipation syndrome(脾約證) in Shanghanlun by comparing 179 & 247 provisions. Methods : Including Shanghanlun, several texts which contain Cheng Wu-ji, Wan Mi-zhai, Qian Huang, Zhu Gong, Fang You-zhi, Yu Jia-yan, Zhang Lu, Cheng Ying-mao, Zhang Xi-ju, Chen Xiu-yuan, Wu Qian, Xu Ling-tai, You Zai-jing, Zhu Dan-xi`s opinion about the splenic constipation syndrome were chosen and comparative consideration was carried out. Results & Conclusions : The following conclusions could be drawn. 247 provisions in Shanghanlun is different from 179 provisions because the beginning of the each splenic constipation syndrome is different. The difference between 179 & 247 provisions are proved by comparing Mild Purgative Decoction which is used Taiyangyangming splenic constipation syndrome and Fructus Cannabis Pill which is used Dorsal pedal pulse splenic constipation syndrome. Cheng Wu-ji`s opinion that 179 & 247 provisions is different is meaningful because he is first investigated the different beginning of the splenic constipation syndrome. Several annotator`s opinion which oppose Cheng Wu-ji is majority and they set a high value on Jangbu(臟腑) factor. Several annotator`s opinion which agree Cheng Wu-ji is minority and they set a high value on splenic constipation syndrome also begins from Taiyangbing. The concept of overlapping of Taiyangyangming is different from the concept of Taiyangyangming. Consequently 179 & 247 provisions has to be distinguished.

유해화학물질의 계통분석

박성우,박유신,이진훈,김남이,김유나,임미애,이상기,유재훈,진광호,신호상,노동석 內務部 國立科學搜査硏究所 2001 國立 科學 搜査 硏究所 年報 Vol.33 No.-

탄성 다물체 동력학 해석 프로그램을 위한 중간 처리기 CNU_IP 개발

유진영,김성수 忠南大學校 産業技術硏究所 1996 산업기술연구논문집 Vol.11 No.1

An intermediate processor, called CNU_IP, has been developed to generate and transfer the necessary data from the commercial finite element program ANSYS to the flexible multibody dynamics program AUTODYN7, which is under development. Binary result file reading routines have been developed to extract deformation mode shapes and consistent mass matrices from the ANSYS binary result file. Using extracted deformation modes, the CNU_IP carries out inertia relief computation for the static correction mode based on the component mode synthesis theory. The program also produces lumped mass entries and lumped rotary inertia entries for the flexible body equations of motion by diagonalizing the consistent mass matrices from the finite element model of a flexible body. Various methods to generate lumped rotary inertia entries have been investigated to select the appropriate method. To show the use of CNU_IP, a flexible chassis model of a military jeep has been demonstrated to produce necessary flexible body data for AUTODYN7.

열처리된 ZnO:Al 투명 도전막의 전기적 및 광학적 특성

유권규,김진해,전춘배,김정규,박기철 경북대학교 센서기술연구소 1998 센서技術學術大會論文集 Vol.9 No.1

The heat treatment effects of the undoped ZnO and Al doped ZnO(ZnO:Al or AZO) transparent conductive films prepared by rf magnetron sputtering were investigated. The variations of the electrical and optical properties with heat treatment temperature and ambient gas or conditions were studied. The resistivity of the undoped ZnO films, heat-treated in air, vacuum and H_(2) plasma for 1 hour, increased rapidly above 200 ℃ , 300 ℃ ,400 ℃ and 400 ℃, respectively. And the resistivity of the ZnO:Al films heat-treated in air also increased rapidly above 300℃ . On the other hand the resistivity of the ZnO:Al films heat-treated in vacuum and H_(2) plasma were observed constant resistivity regardless of heat treatment temperature. The optical transmittance above 550nm is about 90% for all films regardless of impurity doping, the heat treatment temperature and ambient gas or conditions.

LSF의 우선순위 역전을 해결한 실시간 스케쥴링 전략

유한양,김상욱,김대용,김진호 강원대학교 정보통신연구소 1998 정보통신논문지 Vol.2 No.-

LSF scheduling policy involves the Priority Reversal which reverses the scheduling order of real-time tasks. The slack time of the task currently running isn't decreased under LSF. If the task is preempted by a task newly arrived, therefore, its slack time can become longer than those of other tasks with lower priority. This Priority Reversal can make the task with higher priority miss its deadline. In this paper, we propose a new real-time scheduling policy, Consistent_LSF guarantees consistently the scheduling order of current real-time tasks without regard to any new task. The preempted tasks are maintained in a separate stack and are scheduled earlier than the tasks with lower priority. We evaluate the performance of Consistent_LSF through experiments. The results reveal that Consistent_LSF misses deadline less than LSF across all ranges of system load.

含水比 및 다짐 에너지가 Soil-Cement의 壓縮强度에 미치는 影響에 關한 硏究

柳時昶,曺鎭久 慶尙大學校 1980 論文集 Vol.19 No.1

In order to investigate the effects of moisture content and compaction energy on the unconfined compressive strength of soil-cement mixtures, a labortory test for soil-cement mixtures was performed at three levels of cement content, five levels of moisture content and six levels of compaction energy. The results are summarized as follows: 1. The unconfined compressive strength of soil-cement mixtures was increased with the compaction energy increased. The increase of unconfined compressive strength was clearly observed until the compaction number became twenty-five, and also the effect of compaction was remarkable when cement content was in high level. 2. The maximum unconfined compressive strength was observed when moisture content of the soil-cement mixtures was higher than the optimum moisture content. 3. The effect of compaction was more conspicuously observed in the case which moisture content was higher than the optimum. 4. The specific gravity of soil-cement mixtures was almost proportionally increased until cement content was increased to 8 percent, but it was kept approximately constant at the cement content of above 8 percent.