New method for rapidly estimating population densities of the concealed wood‐borer Monochamus alternatus (Coleoptera: Cerambycidae) in the field

Xiao‐Yi Wang,Zhong-qi Yang,Chun-Nan SITU,Jian WANG,Fu-Yong FU 한국곤충학회 2016 Entomological Research Vol.46 No.2

To rapidly estimate pine sawyer, Monochamus alternatus Hope, population densities in forests, the vertical distributions of M. alternatus oviposition sites and larvae on infested Masson pines (Pinus massoniana Lamb.) were studied. Results showed that the number of oviposition sites on sections of trunks between 0 and 2 m above ground was significantly greater than on sections of trunk above 2 m, and the vertical distribution had a significant logarithmic relationship with trunk height. The larval number of M. alternatus on dead infested trees had a significant difference among heights of trunks. Sections on trunks at 2–4 m usually contained the largest number of M. alternatus larvae, while the number of larvae on trunks above 10 m declined significantly, as well as in the 1 m section of trunk at the base. The vertical distribution of M. alternatus larvae on dead infested pines showed a distinct parabolic relationship with trunk height. The number of oviposition sites of M. alternatus on infested Masson pine trunks revealed a significant exponential relationship with the diameter at breast height (DBH) of trees. A significant positive linear relationship also was observed between M. alternatus larval number and DBH on the host pine trees, as well as between the numbers of larvae and oviposition sites on an individual tree. The total number of larvae in an infested tree could be calculated easily using an established equation, through counting the number of oviposition sites at 3–4 m of trunk aboveground. This study developed a practical method for rapid estimation of M. alternatus populations.

Transcriptome profiling of rubber tree (Hevea brasiliensis) discovers candidate regulators of the cold stress respo

Xiao‑Xiao Gong,Bing‑Yu Yan,Jin Hu,Cui‑Ping Yang,Yi‑Jian Li,Jin‑Ping Liu,Wen‑Bin Liao 한국유전학회 2018 Genes & Genomics Vol.40 No.11

Tropical plant rubber tree (Hevea brasiliensis) is the sole source of commercial natural rubber and low-temperature stress is the most important limiting factor for its cultivation. To characterize the gene expression profiles of H. brasiliensis under the cold stress and discover the key cold stress-induced genes. Three cDNA libraries, CT (control), LT2 (cold treatment at 4 °C for 2 h) and LT24 (cold treatment at 4 °C for 24 h) were constructed for RNA sequencing (RNA-Seq) and gene expression profiling. Quantitative real time PCR (qRT-PCR) was conducted to validate the RNA-Seq and gene differentially expression results. A total of 1457 and 2328 differentially expressed genes (DEGs) in LT2 and LT24 compared with CT were respectively detected. Most significantly enriched KEGG pathways included flavonoid biosynthesis, phenylpropanoid biosynthesis, plant hormone signal transduction, cutin, suberine and wax biosynthesis, Pentose and glucuronate interconversions, phenylalanine metabolism and starch and sucrose metabolism. A total of 239 transcription factors (TFs) were differentially expressed following 2 h or/and 24 h of cold treatment. Cold-response transcription factor families included ARR-B, B3, BES1, bHLH, C2H, CO-like, Dof, ERF, FAR1, G2-like, GRAS, GRF, HD-ZIP, HSF, LBD, MIKC-MADS, M-type MADS, MYB, MYB-related, NAC, RAV, SRS, TALE, TCP, Trihelix, WOX, WRKY, YABBY and ZF-HD. The genome-wide transcriptional response of rubber tree to the cold treatments were determined and a large number of DEGs were characterized including 239 transcription factors, providing important clues for further elucidation of the mechanisms of cold stress responses in rubber tree.

Effect of Prior Microstructures on Cementite Dissolution Behavior During Subcritical Annealing of High Carbon Steels

Xiao‑Yu Zhao,Xian‑Ming Zhao,Chun‑Yu Dong,Yang Yang,Huai‑Bin Han 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.6

The variation of the morphology and distribution of cementite particles in different prior structures with spheroidizingannealing process has been proceeded in this paper. It is found that the dissolution and coarsening progresses of variousinitial structures in spheroidizing annealing process are quite asynchronous due to the different interlamellar spacing. Thedissolution rate of degenerated pearlite (D-P) with finer interlamellar spacing is faster. The granular cementite in the spheroidizedmicrostructure is fine, uniform and dense. The mean diameter of spherical cementite is refined to 233 nm. However,the initial structure of degenerated pearlite (D-P) is highly sensitive to the austenitization temperature. The cementite iseasy to be coarsened under high austenitizing temperature. The coarsening is accompanied by the gradual increase of theCr content in the cementite, which increases the stability of the cementite. Therefore, the optimal austenitizing temperaturefor degenerated pearlite (D-P) is suggested to be 770 °C.

Meteorological driven factors of population growth in brown planthopper, Nilaparvata lugens Stål (Hemiptera: Delphacidae), in rice paddies

Xiao‐Zhen Li,Yi ZOU,Hai-Yan YANG,Hai-Jun XIAO,Jian-Guo WANG 한국곤충학회 2017 Entomological Research Vol.47 No.5

Growth of brown planthopper (BPH) (Nilaparvata lugens Stål) in rice paddies is mainly driven by meteorological factors under similar management practices. By analyzing field investigation and meteorological data collected from 2008 to 2013 in Nanchang, China, we show that BPH population densities and monthly growth rates (BGR) changed greatly from May to October, and these changes were closely associated with meteorological factors. Stepwise regression and path analysis indicated average speed of winds (AW) in June and lowest temperature (LT) in July were the first factors entering analysis, which interpreted 46.20% and 31.90% of their influences on BGR. While highest temperature (HT) in August and average temperature (AT) in September were the most important factors affecting BGR, but their direct path coefficients were all smaller than their corresponding indirect path coefficients. In October, relative humidity (RH), AW and number of raining days (RD) had significant effects on BGR. According to the sum of each meteorological factor entering stepwise regression analysis sequences, we found AW had the utmost effect on BPH growth, followed by AT and RH, but LT and RD least. The work demonstrate dynamic meteorological factors driving BPH growth and outbreak in rice paddies, which would facilitate the development of durable approaches for forecasting and controlling this destructive rice pest.

Construction of High Strain Rate Loading Constitutive Model and Failure Model and Prediction of Forming Limit for LA103Z Magnesium Alloy

Hailiang Yang,Xiao Wang,Peng Ni,Zhewen Li,Huixia Liu 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.8

In order to use numerical simulation to reveal the formability of magnesium–lithium alloys and other light alloys under highstrain rate, it is crucial to construct a constitutive model and a forming limit diagram (FLD) of LA103Z alloy that was formedby laser shock at high strain rate. In this study, three different uniaxial tensile experiments on the ultralight alloy materialLA103Z magnesium alloy were conducted, the mechanical behavior of the material with sensitivity to high strain rate wasstudied, and a Johnson–Cook (JC) constitutive model sensitive to high strain rates and suitable for laser shock forming wasproposed. At the same time, the constitutive parameters and failure parameters of the modified JC model of LA103Z magnesiumalloy were obtained through three different uniaxial tensile experiments. On the basis of the relationship betweentensile loading and stress–strain of LA103Z magnesium alloy, the experiments demonstrated the precision of the modified JCconstitutive model. A modified constitutive model was then developed by using the user material subroutine VUMAT, andthen it was applied to ABAQUS. Finally, the formability of the material was simulated, and the FLD of LA103Z magnesiumalloy material in laser shock forming was predicted. This study provides guidance on the actual production and applicationof LA103Z magnesium alloys.

The USP21/YY1/SNHG16 axis contributes to tumor proliferation, migration, and invasion of non-small-cell lung cancer

Pei Xu,Haibo Xiao,Qi Yang,Rui Hu,Lianyong Jiang,Rui Bi,Xueyan Jiang,Lei Wang,Ju Mei,Fangbao Ding,Jianbing Huang 생화학분자생물학회 2020 Experimental and molecular medicine Vol.52 No.-

Deubiquitinases (DUBs) and noncoding RNAs have been the subjects of recent extensive studies regarding their roles in lung cancer, but the mechanisms involved are largely unknown. In our study, we used The Cancer Genome Atlas data set and bioinformatics analyses and identified USP21, a DUB, as a potential contributor to oncogenesis in nonsmall-cell lung cancer (NSCLC). We further demonstrated that USP21 was highly expressed in NSCLCs. We then conducted a series of in vitro and in vivo assays to explore the effect of USP21 on NSCLC progression and the underlying mechanism involved. USP21 promoted NSCLC cell proliferation, migration, and invasion and in vivo tumor growth by stabilizing a well-known oncogene, Yin Yang-1 (YY1), via mediating its deubiquitination. Furthermore, YY1 transcriptionally regulates the expression of SNHG16. Moreover, StarBase bioinformatics analyses predicted that miR4500 targets SNHG16 and USP21. A series of in vitro experiments indicated that SNHG16 increased the expression of USP21 through miR-4500. In summary, the USP21/YY1/SNHG16 axis plays a role in promoting the progression of NSCLC. Therefore, the USP21/YY1/SNHG16/miR-4500 axis may be a potential therapeutic target in NSCLC treatment.

Fabrication of spherical biochar by a two-step thermal process from waste potato peel

Yang, Xiao,Kwon, Eilhann E.,Dou, Xiaomin,Zhang, Ming,Kim, Ki-Hyun,Tsang, Daniel C.W.,Ok, Yong Sik Elsevier 2018 Science of the Total Environment Vol.626 No.-

<P><B>Abstract</B></P> <P>The aim of this study was to develop a new approach for the preparation of spherical biochar (SBC) by employing a two-step thermal technology to potato peel waste (PPW). Potato starch (PS), as a carbon-rich material with microscale spherical shape, was separated from PPW as a precursor to synthesizing SBC. The synthesis process comprised (1) pre-oxidization (preheating under air) of PS at 220 °C and (2) subsequent pyrolysis of the pretreated sample at 700 °C. Results showed that the produced SBC successfully retained the original PS morphology and that pre-oxidization was the key for its shape maintenance, as it reduced surface tension and enhanced structural stability. The SBC possessed excellent chemical inertness (high aromaticity) and uniform particle size (10–30 μm). Zero-cost waste material with a facile and easy-to-control process allows the method to be readily scalable for industrialization, while offering a new perspective on the full use of PPW.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Potato starch (PS) derived from potato peel waste (PPW) has highly regular spherical shape. </LI> <LI> PS morphology was retained with pre-oxidation process after pyrolysis. </LI> <LI> PS's spherical shape affords great homogeneity to the produced biochar. </LI> <LI> Mechanism of shape maintenance was studied via various spectral characterizations. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>

Experimental Investigations of Natural Convection in Wire-Woven Bulk Kagome

Yang, Xiao Hu,Bai, Jia Xi,Kang, Ki-Ju,Lu, Tian Jian,Kim, Tongbeum Springer-Verlag 2014 Transport in porous media Vol.105 No.1

Effect of Trichostatin A on CNE2 Nasopharyngeal Carcinoma Cells - Genome-wide DNA Methylation Alteration

Yang, Xiao-Li,Zhang, Cheng-Dong,Wu, Hua-Yu,Wu, Yong-Hu,Zhang, Yue-Ning,Qin, Meng-Bin,Wu, Hua,Liu, Xiao-Chun,Lina, Xing,Lu, Shao-Ming Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.11

Trichostatin A (TSA) is a histone deacetylase (HDAC) inhibitor. We here investigated its effects on proliferation and apoptosis of the CNE2 carcinoma cell line, and attempted to establish genome-wide DNA methylation alteration due to differentially histone acetylation status. After cells were treated by TSA, the inhibitory rate of cell proliferation was examined with a CCK8 kit, and cell apoptosis was determined by flow cytometry. Compared to control, TSA inhibited CNE2 cell growth and induced apoptosis. Furthermore, TSA was found to induce genome-wide methylation alteration as assessed by genome-wide methylation array. Overall DNA methylation level of cells treated with TSA was higher than in controls. Function and pathway analysis revealed that many genes with methylation alteration were involved in key biological roles, such as apoptosis and cell proliferation. Three genes (DAP3, HSPB1 and CLDN) were independently confirmed by quantitative real-time PCR. Finally, we conclude that TSA inhibits CNE2 cell growth and induces apoptosis in vitro involving genome-wide DNA methylation alteration, so that it has promising application prospects in treatment of NPC in vivo. Although many unreported hypermethylated/hypomethylated genes should be further analyzed and validated, the pointers to new biomarkers and therapeutic strategies in the treatment of NPC should be stressed.

RAKE Receiver for Time Division Synchronous CDMA Mobile Terminal

Yang Xiao,Kwang-Jae Lee,Moon-Ho Lee 한국전자파학회JEES 2006 Journal of Electromagnetic Engineering and Science Vol.6 No.1

For the sake of the potential ability of overcoming interference in TD-SCDMA(time division-synchronous code division multiple access) systems, pilot signal is adopted, but the presented TD-SCDMA protocol has not considered the Rake technique for their mobile terminals. This paper developed a RAKE receiver algorithm and an implementation circuit, which make use of the pilot signal in the burst structure of the TD-SCDMA base station to estimate main channel parameter(channel delays) in the downlink of TD-SCDMA wireless network. The algorithm can reduce multipath interference for the mobile units in multiusers' case. Theoretic performance analysis presented in the paper and computer simulations show that there is a range of BER for Rake receiver and confirm that the proposed RAKE receiver algorithm achieved a better performance under multipath fading propagation and multiusers conditions.