http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Effect of Al on the Microstructure and Mechanical Properties of Mg–Sn–Ca–Mn Wrought Alloy
Yun Feng,Yuanyuan Yang,Zongqi Xiao,Xianglong Meng,Guorong Zhou,Jinfeng Leng,Xinying Teng 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.6
Mg–Sn–Ca–Mn–xAl (x = 0,1.5 wt%) alloys with ultra-fine recrystallized grains were prepared by conventional extrusion(400 °C, 0.5 mm/s). Effects of aluminum (Al) on mechanical properties and microstructure of the Mg–1Sn–1Ca–0.5Mn(wt%) alloy were systematically investigated. By the addition of 1.5 wt% Al, the yield strength of the as-extruded alloysignificantly increased from 183 to 237 MPa. The as-cast alloys show a dendritic structure consists of α-Mg, (Mg, Al)2Ca,and CaMgSn phases. The as-extruded Mg–1Sn–1Ca–0.5Mn–1.5Al alloys exhibit a bimodal grain structure composed ofdynamic recrystallized (DRXed) fine grains and coarse unDRXed grains. Compared with Al free alloy, a lot of nano-scaleplanar Al2Caand rectangle shape Al8Mn5precipitated in the as-extruded alloy with 1.5 wt% Al. Meanwhile, the addition ofAl significantly strengthened alloys’ fiber texture with < 10–10 >//ED.
겨울철 자연(통풍)냉각과 상부 쿨링시스템을 이용한 남부 지역의 벼 고품질 유지를 위한 저온저장기술 개발
녕효봉,사공문,함택모,조성찬 忠北大學校 農業科學硏究所 2012 農業科學硏究 Vol.28 No.2
The purpose of this study is to investigate the storage characteristics of rough rice in a low temperature storage and dry bin using cooling system. The results were compared with the storage method of ambient temperature bin. The rough rice storage characteristics were evaluated from February to August 2010, using a storage and dry bin of 500 ton capacity. The results were as followings: Storage and dry bin using cooling system maintained the rice temperature less than 15oC over the storage period. The rough rice stored in the ambient temperature bin showed higher moisture content and lower germination rate than the rough rice stored in the bin using cooling system. The creaked rate and acid value of brown rice in the cooling bin storage increased less than the ambient temperature bin storage. The result indicates that storage bin using winter cold air and cooling system showed better maintaining germination of rice, less change of physiological activities and cracked kernel, and better maintaining of rice quality, comparing the ambient temperature bin
( Xiao Feng Ning ),( Tae Hwan Kang ),( Oui Woung Kim ),( Chung Su Han ) 한국농업기계학회 2012 바이오시스템공학 Vol.37 No.2
This study was conducted to investigate the optimal sorting factors in establishing an efficient sorting technology for brown rice. Methods: The brown rice varieties used in this study were Il Pum, Chu Cheong, Dong Jin, Un Gwang, Nam Pyeong, and Dae An. These were classified into whole grain, unriped grain, and green dead rice. The shape factors were analyzed based on length, width and thickness of the grains. Results: The results revealed that the maximum length among whole grain, unriped grain, and green dead rice was observed in Dae An variety while Chu Cheong variety showed the minimum. Further more, Il Pum brown rice showed the maximum width while Dong Jin variety showed the minimum. In the case of thickness, the maximum was observed in Un Gwang variety and that of the minimum among Nam Pyeong variety for both whole grain and unriped grain. Conclusions: The length and width can be used as determinants in sorting factors of whole grain and green dead rice, and the thickness can be considered as optimum sorting factor of whole grain and unriped grain.
Xiao-Feng Guo,김건중 대한화학회 2011 Bulletin of the Korean Chemical Society Vol.32 No.1
Periodically ordered mesoporous manganese oxides were synthesized in a single and double replication procedure. Mesoporous SBA-15 and -16 silica and their reverse replica carbons were successively used as hard templates. The silica and carbon pore systems were infiltrated with Mn(NO_3)_2․xH_2O or Mn(AcAc)_2, which was then converted to Mn_2O_3 at 873 K; the silica and carbon matrix were finally removed by NaOH solution or calcinations in air. The structure of the mesoporous Mn_2O_3, using a carbon template, corresponds to that of the original SBA-15 and SBA-16 silica. The products consist of hexagonally arranged cylindrical mesopores with crystalline pore walls or cubic mesoporous pores. The structure of replica has been confirmed by XRD, TEM analysis, and its electrochemical properties were tested with cyclic voltammetry. Formation of Mn_2O_3 inside the mesoporous carbon pore system showed much improved electrical properties.
( Xiao Feng Ning ),( He Li ),( Tae Hwan Kang ),( Chang Su Han ) 한국농업기계학회 2012 바이오시스템공학 Vol.37 No.3
Purpose: This study was conducted to investigate the storage and quality characteristics of brown rice under the low temperature warehouse conditions using ambient cold air in the winter. Methods: This new technique maintains rough rice warehouse temperature below 15℃ without cooling operation until the end of May. Four hundred tons of rough rice were stored in the low temperature grain warehouse, and were aerated from the top to the bottom using ambient cold air in February. The quality of rough rice was evaluated from February through October. Results: The results were as followings. Moisture contents of rough rice in the low temperature storage had decreased less than the ordinary temperature storage. Cracked rate of brown rice in the ordinary temperature storage and low temperature storage increased by 4~10.8% and 1.6~7.2%, respectively. The germination rate of rough rice under the ordinary and the low temperature warehouse decreased by 15.0~25.0% and 1.7~8.0%, respectively. The acid value of brown rice under the ordinary and the low temperature warehouse increased by 3.67~6.72 KOH mg/100g and 3.08~4.08 KOH mg/100g, respectively. Conclusions: The result indicates that low temperature storage using ambient winter air showed better maintaining germination of rice, less change of physiological activities and cracked kernel, and better maintaining of rice quality, comparing the ordinary temperature storage.
The Rise of Corporate Digital Transformation and Government Regulatory Innovation
Xiao-Yan PAN,Shu-Feng XIAO 동아시아경상학회 2021 The East Asian Journal of Business Economics Vol.9 No.4
Purpose – We attempt to provide a background, a review of current development of the digital technologies and their effect on the digital transformation process, and then offer our recommendations for identifying and taking strategic actions to exploit them. More importantly, we also aim to offer important recommendations for policymakers and practitioners how to better advance the innovation system by facilitating the development of digital technologies and take advantage of improvements in digital technologies. Research design, data, and methodology – This study undertakes an extensive and critical review of the digital transformation literature and identifies several important issues with relevant practical examples of best practices in the transition to digital transformation process. Results – This paper finds that digital technologies with strong technological backing have brought technological spillovers to the economy while also generating shocks. Conclusion – To maintain a healthy and developing market order, it is necessary for governments to innovate regulatory models. This study offers several important suggestions for government regulatory innovation that we believe should help to better deploy digital transformation initiatives and enhance the efficiency and effectiveness of government regulation in contributing more to the high-quality and healthy development of the digital economy.
A Mathematical Model for Color Changes in Red Pepper during Far Infrared Drying
( Xiao Feng Ning ),( Chung Su Han ),( He Li ) 한국농업기계학회 2012 바이오시스템공학 Vol.37 No.5
Purpose: The color changes in red pepper during far infrared drying were studied in order to establish a color change model. Methods: The far infrared drying experiments of red pepper were conducted at two temperature levels of 60, 70℃ and two air velocity levels of 0.6 and 0.8 m/s. The results were compared with the hot-air drying method. The surface color changes parameters of red pepper were measured qualitatively based on L (lightness), a (redness), b (yellowness) and total color changes (ΔE). The goodness of fit of model was estimated using the coefficient of determination (R2), the root mean square error (RMSE), the mean relative percent error (P) and the reduced chi-square (χ2). Results: The results show that an increase in drying temperature and air velocity resulted in a decrease in drying time, the values of L (lightness) and a (redness) decreased with drying time during far infrared drying. The developed model showed higher R2 values and lower RMSE, P and χ2 values. Conclusions: The model in this study could be beneficial to describe the color changes of red pepper by far infrared drying.
Xiao-Feng Zhao,Tao Han,Bo Xiao,Xi-Sheng Zhan,Huaicheng Yan 제어·로봇·시스템학회 2023 International Journal of Control, Automation, and Vol.21 No.12
This paper investigates the finite-time and fixed-time bipartite consensus tracking (Fin- and Fix-TBCT) problems for second-order multi-agent systems (MASs) under a signed directed communication network, in which both cooperative and competition exist. To achieve bipartite consensus tracking (BCT) within finite time and fixed time, two novel distributed control protocols utilizing integral sliding-mode control concept are presented and discussed, respectively. By virtue of Lyapunov stability and homogeneity with dilation, several sufficient conditions for achieving Fin- and Fix-TBCT for second-order MASs are obtained. Eventually, numerical simulation results are provided to verify the validity of the obtained theoretical results.