Correction to: Simulation of Counter-Rotating Vortex Pairs on a Triangular-Flapped Wing with Flap-Tip Free Vortex Modeling

Woo-Ram Kang,Se Hwan Park,이덕주 한국항공우주학회 2018 International Journal of Aeronautical and Space Sc Vol.19 No.4

The article “Simulation of Counter-Rotating Vortex Pairs on a Triangular-Flapped Wing with Flap-Tip Free Vortex Modeling”, written by Woo-Ram Kang, Se Hwan Park and Duck-Joo Lee, was originally published electronically on the publisher’s internet portal (currently SpringerLink) on 08 September 2018 with open access. With the author(s)’ decision to step back from Open Choice, the copyright of the article changed on 24 October 2018 to © The Korean Society for Aeronautical & Space Sciences and Springer Nature Singapore Pte Ltd. 2018 and the article is forthwith distributed under the terms of copyright. The original article has been corrected.

심장박동 측정 센서회로 IC 설계에 관한 연구

이우람,이완직,원창수,손상희 청주대학교 산업과학연구소 2008 産業科學硏究 Vol.26 No.1

Interface IC design for heart beat measurement sensor is proposed and executed by using current control schmitt trigger. The function of interface IC is to measure the heart beat using PPG from sensor. This circuit is composed of analog circuit that converts current signal of sensor to voltage and digital circuit that converts it to digital value. Applying OTA to schmitt trigger and oscillator, operation speed is faster and linear error is smaller than the conventional one. Besides, follow features such as low power consumption, simple configuration and high resolution, are realized by IC design.

전사억제인자 Small Hetrodimer Partner-Interacting Leucine Zipper(SMILE)의 당대사와 지질대사 조절

박우람,최병윤,사다시밤 난티니,김돈규 전남대학교 농업과학기술연구소 2022 농업생명과학연구동향 Vol.60 No.-

Small heterodimer partner-interacting leucine zipper (SMILE) is a member of the cAMP response element-binding protein / activator transcription factor (CREB/ATF) family of basic leucine zipper (bZIP) transcription factors. Structurally, it exists in small and long isoforms resulting from alternative usage of the initiation codon. Though structurally similar to bZIP proteins, SMILE cannot bind to DNA but can homodimerize like them. SMILE acts as a corepressor for nuclear receptors related transcriptional activity and other transc- ription factors. SMILE plays a crucial role in metabolic signaling pathways by inhibiting DNA binding, competing with coactivators, and directly repressing transcription. This review focuses on the role of SMILE in hepatic glucose and lipid metabolism. Regulation of SMILE improves pathological conditions such as hepatitis, diabetes and fatty liver disease. Therefore, understanding the role of SMILE in metabolism and signaling pathways paves the way to consider SMILE as a potential target in treating liver metabolic diseases.

바이오 디젤유 생산을 위한 대두유 에스테르화 반응의 속도론적 연구

황우람,신용섭 慶星大學校 環境問題硏究所 2002 環境硏報 Vol.12 No.1

The esterification of vegetable oil with methanol is one of the best ways to improve it's combustion characteristics. Therefore, in this study, the process which produce the bio-diesel oil from vegetable oil by the esterification reaction was investigated. Especially, the kinetic study on the esterification reaction of soybean oil was performed. Catalysts used in this study were sodium hydroxide as a homogeneous catalyst and calcium hydroxide as a heterogeneous catalyst. Because sodium hydroxide reacted with free fatty acid in the soybean oil and 0.5wt% of the sodium hydroxide was greater than the free fatty acid content in the soybean oil, it is very important for the completion of esterification reaction that the free fatty acid in the soybean oil should be removed before the esterification reaction. Compared with reaction rate constant of the esterification reaction rate constant of saponification had constant value in case of using sodium hydroxide catalyst. Interestingly, rate constant of the esterification reaction was decresed with increase of sodium hydroxide dosage. Compared with reaction rate constant of the esterification reaction, reaction rate constant of saponification had constant value in case of using sodium hydroxide catalyst. Interestingly, rate constant of the esterification reaction was decresed with increase of sodium hydroxide dosage. Using calcium hydroxide catalyste, reaction rate constants in FAMEs production step were Measured from 0.9141 min-1 to 1.0377 min-1, and reaction rate constants in monoglyceride and diglyceride production steps were measured from 0.0093 min-1 to 0.0386 min-1 according to the calcium hydroxide dosage. So, monoglyceride and diglyceride production steps rate controlling steps in overall esterification reaction.

Lingual K-loop archwire를 이용한 발치공간 폐쇄시 초기응력 분포에 대한 3차원 광탄성학적 연구

변보람,김성식,손우성 대한치과교정학회 2002 대한치과교정학회지 Vol.32 No.5

제1소구치 발치를 동반한 설측교정치료시 lingual K-loop archwire로 전치부 후방견인을 시행한 경우 전치부 및 구치부에서 치조골에 발생하는 초기응력을 알아보기 위하여, K-loop의 의 vertical lg 길이는 15mm로 하고 편측당 350gm의 힘으로 활성화시킨 후 상악궁 광탄성 모형의 응력동결을 시행하고 각 치아별로 절단하여 3차원 광탄성법으로 분석한 바 다음과 같은 결론을 얻었다. 1. 중절치의 근심면은 치관측일수록 더 큰 인장응력을 보였으며 원심면은 치관측일수록 더 큰 압축응력을 보였다. 순면에서는 치관측일수록 더 큰 인장응력을 보였으며 설면에서는 치근측일수록 더 큰 압축응력을 보였다. 치근첨에서는 압축응력이 나타났다. 2. 측절치의 근심면에서는 치관측만 인장응력이 관찰되었고 원심면에서는 고른 압축응력을 보였다. 순면에서는 치관측일수록 더 큰 인장응력이 관찰되었고 설면에서는 치관측에서는 인장응력을, 치근측에서는 압축응력을 보였다. 치근첨에서는 압축응력이 관찰되었다. 3. 견치의 근심면은 치관측에서는 인장응력을, 치근측에서는 압축응력을 보였고 원심면은 인장응력을 보였다. 순면과 설면은 치관측일수록 큰 인장응력을 보였다. 순면보다 설면에서 더 큰 인장응력을 보였다. 치근첨에서는 압축응력이 관찰되었다. 4. 제2소구치는 근심면은 인장응력을 보이며 원심면은 치관측에서는 압축응력을, 치근측에서는 인장응력을 보였다. 협면은 치관측에서 압축응력을 보였으며, 설면은 치관측일수록 더 큰인장응력이 관찰되었다. 치근첨에서는 인장응력을 보였다. 5. 제 1대구치는 근원심면 모두에서 치관측일수록 더 큰 인장응력을 보였다. 협면에서는 응력이 나타나지는 않았고 설면은 치관측일수록 더 큰 인장응력이 관찰되었다. 협측치근들의 치근첨에서는 압축응력을, 구개측치근의 치근첨에서는 무응력을 보였다. 6. 제2대구치는 모든 치근의 치근첨에서 압축응력이 관찰되었다. 근심면은 치관측일수록 더 큰 압축응력을, 원심면은 치관측일수록 더 큰 인장응력을 보였다. 협면은 치관측일수록 더 큰 인장응력을 설면은 치관측일수록 더 큰 압축응력을 나타내었다. 따라서 전치부 후방견인시 transverse bowing effect는 뚜렷이 나타났으나, vertical bowing effect는 나타나지 않고 오히려 전치부가 함입되려는 응력이 발생하였다. This study was designed to investigate the stress distribution of alveolar bone in case of en masse retraction with lingual K-loop archwire using the 3-dimensional photoelastic stress analysis followed by stress freezing process. Lingual K-loop archwire which had loop in 15mm height was used and activated by retraction force of 350gm per each side. The results were as follows : 1. Central incisor : As the closer side to crown, the larger tensile stress was distributed at both mesial and labial surfaces and the larger compressive stress was distributed at distal surface. As the closer side to root apex, the larger compressive stress was distributed at lingual surface. The compressive stress was distributed at root apex. 2. Lateral incisor : The tensile stress was distributed at the coronal side of mesial surface. The compressive stress was distributed at distal surface. As the closer side to crown, the larger tensile stress was distributed at labial surface. The tensile stress was distributed at coronal side and the compressive stress was distributed at apical side of lingual surface. The compressive stress was distributed at root apex. 3. Canine : The tensile stress was distributed at coronal side and the compressive stress was distributed at apical side of musial surface. the tensile stress was distributed at distal surface. As the closer side to drown, the larger tensile stress was distributed at both musial and distal surfaces. The compressive stress was distributed at root apex. 4. Second premolar : The tensile stress was distributed at mesial surface. The compressive stress was distributed at coronal side and the tensile stress was distributed at apical side of distal surface. the compressive stress was distributed at coronal side of buccal surface. As the closer side to crown, the larger tensile stress was distributed at lingual surface. The compressive stress was distributed at root apex. 5. First molar : As the closer side to crown, the larger tensile stress was distributed at both mesial and distal surfaces. No stress was distributed at buccal surface. As the closer side to crown, the larger tensile stress was distributed at both lingual surfaces. The compressive stress was distributed at buccal root apexes. 6. Second molar : The compressive stress was distributed at all root apexes. As the closer side to crown, the larger compressive stress was distributed at both mesial and lingual surfaces, and the larger tensile stress at both distal and buccal surfaces. Transverse bowing effect was observed in en-masse retraction with lingual K-loop archwire, however vertical bowing effect was not. Rather, reverse vertical bowing effect was developed.

능력스펙트럼법에 의한 복층 래티스돔의 성능점 산정에 관한 연구

정명채,조우람,김홍건 전주대학교 공학기술종합연구소 2002 전주대학교 공학기술종합연구소 학술논문집 Vol.8 No.1

Performance based seismic design is a very efficient method in checking the seismic capacity of buildings. In this study, the method evaluating performance point of a double layered lattice dome based on capacity spectrum method (CSM) is proposed Because behaviors of a double layered lattice dome are affected by higher modes of vibration, they need to be included in evaluating seismic resistant capacity. In this paper, they are considered in the lateral bad distribution on for the pushover analysis process. The proposed method is successfully applied to estimate the performance point of a double layered lattice dome.

불량주거지 주거환경개선 목표설정을 위한 거주민의 중요도에 관한 연구

정금호,최우람 대한건축학회 2004 대한건축학회논문집 Vol.20 No.5

The purpose of this study is to examine the priority order in determining the goal of the residential environment improvement plan, in Shin-an district, Gwangju. To decide the order, "Analytic Hierarchy Process", one of the analytic methods, is used. In systematically analysing the problems, it could enable us to itemize the intricate problems in setting up the goals and to know the priority between elements. The results of this study can be summarized as the followings; Firstly, in the subject area, the priority order of residential environment improvement are listed below : Security from Firstly, in the subject area, the priority order of residential environment improvement are listed below : Security from Secondly, for housing environment improvement, senses of the residents in the subject area are divided below : Construction, Building equipment, Social infrastructure, Public facilities, Social and economic characteristics, and Psychologic characteristics. Lastly, the order between them are list below : Public facilities, Psychologic Characteristics, Social and economic characteristics, Building equipment, Construction, and Social infrastructure.

골조구조물의 소성해석을 위한 알고리즘 개발 및 소성붕괴의 고찰

정명채,조우람 전주대학교 공학기술종합연구소 2003 전주대학교 공학기술종합연구소 학술논문집 Vol.9 No.1

Some members of building frame under severe cyclic loads may be experienced inelastic behavior. In seismic design of building frames elasto-plastic analysis of flame structures are needed to understand the inelastic behavior. In this study, simple and clearer elasto-plastic analysis algorithm is used to investigate the collapse mechanism of a building frame. This algorithm is simple and clear to understand the inelastic behavior of the frame. Two-bay frame is used as a model. The analysis results are very reasonable to describe the collapse of the frame.

8.3% Carbamide Peroxide 함유 펜 형 자가미백제인 BIancTis Forte의 색조개선 및 안전성에 관한 임상연구

이진경,민선홍,홍성태,오소람,정신혜,황영혜,유성엽,배광식,백승호,이우철,손원준,금기연 대한치과보존학회 2009 Restorative Dentistry & Endodontics Vol.34 No.2

This clinical study evaluated the whitening effect and safety of polymer based-pen type BlancTis Forte(NIBEC) containing 8.3% carbamide peroxide. Twenty volunteers used the BlancTis Forte whitening agent for 2 hours twice a day for 4 weeks As a control. Whitening Effect Pen (LG) containing 3% hydrogen peroxide was used by 20 volunteers using the same protocol. The change in shade (ΔE^(*) color difference) was measured using Shadepilot™ (DeguDent) before, during and after bleaching (2 weeks, 4 weeks and postbleaching 4 weeks). A clinical examination for any side effects (tooth hypersensitivity or soft tissue complications) was also performed at each check-up. The following results were obtained. 1 Both the experimental and control groups displayed a noticeable change in shade (ΔE) of over 2 No significant differences were found between the two group (p>0.05) implying that the two agents have a similar whitening effect. 2 The whitening effect was mainly due to changes in a and b values rather than in L value (brightness). The experimental group showed a significantly higher change in b value thus yellow shade than the control(p < 0.05) 3 None of the participants complained of tooth hypersensitivity or soft tissue complications confirming the safety of both whitening agents 8.3%의 carbamide peroxide를 함유한 펜형 코팅용 미백제인 BlancTis Forte (NIBEC, Seosul & JinCheon)를 실험군으로, 3% hydrogen peroxide를 함유한글 Whitening Effect Pen (LG. Seoul) 제재를 대조군으로 각각 피험자 20명에게 2시간씩 1일 2회 제조사의 지시대로 치아표면에 4주간 적용하도록 지시하고 색조개선 효능과 안전성을 평가하였다. 미백 효과는 미백 전 및 미백 2주, 4주 및 미백 종료 4주 후에 Shadopilot™을 이용하여 색 변화를 측정하였고, 매 내원시기마다 모든 환자는 치수생활력 검사와 치주 및 치태 검사를 통해 부작용 여부 (치아과민증 및 구감 내 연조직의 부작용)를 기록한 후 다음과 같은 결과를 얻었다. 1.실험군 및 대조군의 색 변화량 (ΔE)은 2이상으로 인지할 수 있는 색 변화를 보였으며, 두 제품 간에는 통계적으로 유의한 차이를 보이지 않아 (p > 0.05) 유사한 미백효능을 나타냄을 알 수 있었다. 2,미백효과는 명도의 개선보다는 주로 a. b값의 변화에 의한 것으로 특히 실험군에서 b값의 변화, 즉 황색조의 개선효과가 대조군에 비해 유의성 있게 높은 것으로 나타났다 (p <0.05). 3.치아나 치은의 과민증이나 이상증상을 호소하는 피험자는 없어 두 제품 모두 안전성을 확인할 수 있었다.

내용기반 이미지 검색을 위한 문자-에지 맵의 특징을 이용한 자연이미지에서의 텍스트 영역 추출

박종천,황동국,이우람,권교현,전병민 충북대학교 컴퓨터정보통신 연구소 2006 컴퓨터정보통신연구 Vol.14 No.2

자연이미지에 포함된 텍스트는 많은 중요한 정보를 포함하고 있다. 그러므로 자연이미지에서 텍스트를 추출할 수 있다면 다양한 분야에서 활용될 수 있다. 본 논문에서는 문자-에지 맵 패턴 히스토그램을 분석함으로서 텍스트 영역을 추출하는 방법을 제안한다. 첫 번째 단계로, Canny 에지 검출기로 에지를 추출하여 16가지 에지 맵을 생성하고, 두 번째 단계로 16가지 에지 맵을 조합하여 문자 특징을 갖는 8가지 문자-에지 맵을 생성한다. 세 번째 단계로 8가지 문자-에지 맵과 16가지 에지 맵을 이용하여 텍스트 후보 영역을 추출 하고, 마지막으로 텍스트 후보 영역에 대한 검증은 문자-에지 맵의 패턴 히스토그램 및 텍스트 영역의 구조적 특징을 이용하여 수행하였다. 실험결과 제안한 방법은 복잡한 배경, 다양한 글꼴, 다양한 텍스트 컬러로 구성된 자연이미지에서 텍스트 영역을 효과적으로 추출하였다. The text to be included in the natural images has many important information. Therefore, if we can extract the text in natural images, it can be applied to many important applications. In this paper, we propose a text region extraction method using pattern histogram of character-edge maps. In the first step, we extract edges with the Canny edge detector and create 16 kinds of edge maps from the extracted edges. In the second step, we make 8 kinds of character-edge maps that has a character features with combination of edge maps. In the third step, we extract a text regions using 8 kinds of character-edge maps and 16 kinds of edge maps. Finally, verification about candidate of the text regions uses pattern histogram of character-edge maps and structural features of text regions. The proposed method is experimented with various kinds of natural images. Experimental results show that the proposed method extracts a text regions composed of complex background, various letters, various text colors effectively.