Wind loads and load-effects of large scale wind turbine tower with different halt positions of blade

Shitang Ke,Wei Yu,Tongguang Wang,Lin Zhao,Yaojun Ge 한국풍공학회 2016 Wind and Structures, An International Journal (WAS Vol.23 No.6

In order to investigate the influence of different blade positions on aerodynamic load and wind loads and load-effects of large scale wind turbine tower under the halt state, we take a certain 3 MW large scale horizontal axis three-blade wind turbine as the example for analysis. First of all, numerical simulation was conducted for wind turbine flow field and aerodynamic characteristics under different halt states (8 calculating conditions in total) based on LES (large eddy simulation) method. The influence of different halt states on the average and fluctuating wind pressure coefficients of turbine tower surface, total lift force and resistance coefficient, circular flow and wake flow characteristics was compared and analysed. Then on this basis, the time-domain analysis of wind loads and load-effects was performed for the wind turbine tower structure under different halt states by making use of the finite element method. The main conclusions of this paper are as follows: The halt positions of wind blade could have a big impact on tower circular flow and aerodynamic distribution, in which Condition 5 is the most unfavourable while Condition 1 is the most beneficial condition. The wind loads and load-effects of disturbed region of tower is obviously affected by different halt positions of wind blades, especially the large fluctuating displacement mean square deviation at both windward and leeward sides, among which the maximum response occurs in 350 to the tower top under Condition 8; the maximum bending moment of tower bottom occurs in 330 under Condition 2. The extreme displacement of blade top all exceeds 2.5 m under Condition 5, and the maximum value of windward displacement response for the tip of Blade 3 under Condition 8 could reach 3.35 m. All these results indicate that the influence of halt positions of different blades should be taken into consideration carefully when making wind-resistance design for large scale wind turbine tower.

Analysis of the effect of blade positions on the aerodynamic performances of wind turbine tower-blade system in halt states

Shitang Ke,Wei Yu,Tongguang Wang,Yaojun Ge,Yukio Tamura 한국풍공학회 2017 Wind and Structures, An International Journal (WAS Vol.24 No.3

The unsteady flow field disturbance between the blades and tower is one of the primary factors affecting the aerodynamic performance of wind turbine. Based on the research object of a 3MW horizontal axis wind turbine which was developed independently by Nanjing University of Aeronautics and Astronautics, numerical simulation on the aerodynamic performance of wind turbine system in halt state with blades in different position was conducted using large eddy simulation (LES) method. Based on the 3D unsteady numerical simulation results in a total of eight conditions (determined by the relative position with the tower during the complete rotation process of the blade), the characteristics of wind pressure distributions of the wind turbine system and action mechanism of surrounding flow field were analysed. The effect of different position of blades on the aerodynamic performance of wind turbine in halt state as well as the disturbance effect was evaluated. Results of the study showed that the halt position of blades had significant effect on the wind pressure distribution of the wind turbine system as well as the characteristics of flow around. Relevant conclusions from this study provided reference for the wind-resistant design of large scale wind turbine system in different halt states.

Wind-sand coupling movement induced by strong typhoon and its influences on aerodynamic force distribution of the wind turbine

Shi-Tang Ke,Yifan Dong,Rongkuan Zhu,Tongguang Wang 한국풍공학회 2020 Wind and Structures, An International Journal (WAS Vol.30 No.4

The strong turbulence characteristic of typhoon not only will significantly change flow field characteristics surrounding the large-scale wind turbine and aerodynamic force distribution on surface, but also may cause morphological evolution of coast dune and thereby form sand storms. A 5MW horizontal-axis wind turbine in a wind power plant of southeastern coastal areas in China was chosen to investigate the distribution law of additional loads caused by wind-sand coupling movement of coast dune at landing of strong typhoons. Firstly, a mesoscale Weather Research and Forecasting (WRF) mode was introduced in for high spatial resolution simulation of typhoon “Megi”. Wind speed profile on the boundary layer of typhoon was gained through fitting based on nonlinear least squares and then it was integrated into the user-defined function (UDF) as an entry condition of small-scaled CFD numerical simulation. On this basis, a synchronous iterative modeling of wind field and sand particle combination was carried out by using a continuous phase and discrete phase. Influencing laws of typhoon and normal wind on moving characteristics of sand particles, equivalent pressure distribution mode of structural surface and characteristics of lift resistance coefficient were compared. Results demonstrated that: Compared with normal wind, mesoscale typhoon intensifies the 3D aerodynamic distribution mode on structural surface of wind turbine significantly. Different from wind loads, sand loads mainly impact on 30° ranges at two sides of the lower windward region on the tower. The ratio between sand loads and wind load reaches 3.937% and the maximum sand pressure coefficient is 0.09. The coupling impact effect of strong typhoon and large sand particles is more significant, in which the resistance coefficient of tower is increased by 9.80% to the maximum extent. The maximum resistance coefficient in typhoon field is 13.79% higher than that in the normal wind field.

3‐Hydroxymorphinan, a metabolite of dextromethorphan, protects nigrostriatal pathway against MPTP‐elicited damage both <i>in vivo</i> and <i>in vitro</i>

Zhang, Wei,Shin, Eun‐,Joo,Wang, Tongguang,Lee, Phil Ho,Pang, Hao,Wie, Myung‐,Bok,Kim, Won‐,Ki,Kim, Seong‐,Jin,Huang, Wen‐,Hsin,Wang, Yongjun,Zhang, Wanqin,Hong, Jauȁ Federation of American Society for Experimental Bi 2006 The FASEB Journal Vol.20 No.14

<P>We investigated the neuroprotective property of analogs of dextromethorphan (DM) in lipopolysaccharide (LPS) and 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP) models to identify neuroprotective drugs for Parkinson's disease (PD). In vivo studies showed that daily injections with DM analogs protected dopamine (DA) neurons in substantia nigra pars compacta and restored DA levels in striatum using two different models for PD. Of the five analogs studied, 3-hydroxymorphinan (3-HM), a metabolite of DM, was the most potent, and restored DA neuronal loss and DA depletion up to 90% of the controls. Behavioral studies showed an excellent correlation between potency for preventing toxin-induced decrease in motor activities and neuroprotective effects among the DM analogs studied, of which 3-HM was the most potent in attenuating behavioral damage. In vitro studies revealed two glia-dependent mechanisms for the neuroprotection by 3-HM. First, astroglia mediated the 3-HM-induced neurotrophic effect by increasing the gene expression of neurotrophic factors, which was associated with the increased acetylation of histone H3. Second, microglia participated in 3-HM-mediated neuroprotection by reducing MPTP-elicited reactive microgliosis as evidenced by the decreased production of reactive oxygen species. In summary, we show the potent neuroprotection by 3-HM in LPS and MPTP PD models investigated. With its high efficacy and low toxicity, 3-HM may be a novel therapy for PD.</P>

Effect of characteristics of submicrometer powder on the sintering behaviors of Al2O3 ceramic

Qingbo Tian,Jinshan Dai,Zhijie Lv,Tongguang Zhai 한양대학교 세라믹연구소 2016 Journal of Ceramic Processing Research Vol.17 No.7

The sintering behaviors of high purity Al2O3 ceramics prepared from a submicron-scale powder were investigated. The effectsof ball milling on the evolution of alumina powders’ compressibility, sinterability, grain growth and microstructure duringsintering process were studied. It was observed that the relative density of the Al2O3 ceramics increased with increasingcompaction pressure on the green compacts and the sintering temperature. However, the applied pressure had less influenceon the relative density of ceramics sintered from green compact with narrower size distribution and finer powder. The fastgrain growth of the Al2O3 ceramics occurred in different temperature ranges and was influenced by milling time and formingmethods. The effect of milling on the microstructural evolution of alumina during sintering was also discussed.

Wind loads and load-effects of large scale wind turbine tower with different halt positions of blade

Ke, Shitang,Yu, Wei,Wang, Tongguang,Zhao, Lin,Ge, Yaojun Techno-Press 2016 Wind and Structures, An International Journal (WAS Vol.23 No.6

In order to investigate the influence of different blade positions on aerodynamic load and wind loads and load-effects of large scale wind turbine tower under the halt state, we take a certain 3 MW large scale horizontal axis three-blade wind turbine as the example for analysis. First of all, numerical simulation was conducted for wind turbine flow field and aerodynamic characteristics under different halt states (8 calculating conditions in total) based on LES (large eddy simulation) method. The influence of different halt states on the average and fluctuating wind pressure coefficients of turbine tower surface, total lift force and resistance coefficient, circular flow and wake flow characteristics was compared and analysed. Then on this basis, the time-domain analysis of wind loads and load-effects was performed for the wind turbine tower structure under different halt states by making use of the finite element method. The main conclusions of this paper are as follows: The halt positions of wind blade could have a big impact on tower circular flow and aerodynamic distribution, in which Condition 5 is the most unfavourable while Condition 1 is the most beneficial condition. The wind loads and load-effects of disturbed region of tower is obviously affected by different halt positions of wind blades, especially the large fluctuating displacement mean square deviation at both windward and leeward sides, among which the maximum response occurs in $350^{\circ}$ to the tower top under Condition 8; the maximum bending moment of tower bottom occurs in $330^{\circ}$ under Condition 2. The extreme displacement of blade top all exceeds 2.5 m under Condition 5, and the maximum value of windward displacement response for the tip of Blade 3 under Condition 8 could reach 3.35 m. All these results indicate that the influence of halt positions of different blades should be taken into consideration carefully when making wind-resistance design for large scale wind turbine tower.

Analysis of the effect of blade positions on the aerodynamic performances of wind turbine tower-blade system in halt states

Ke, Shitang,Yu, Wei,Wang, Tongguang,Ge, Yaojun,Tamura, Yukio Techno-Press 2017 Wind and Structures, An International Journal (WAS Vol.24 No.3

The unsteady flow field disturbance between the blades and tower is one of the primary factors affecting the aerodynamic performance of wind turbine. Based on the research object of a 3MW horizontal axis wind turbine which was developed independently by Nanjing University of Aeronautics and Astronautics, numerical simulation on the aerodynamic performance of wind turbine system in halt state with blades in different position was conducted using large eddy simulation (LES) method. Based on the 3D unsteady numerical simulation results in a total of eight conditions (determined by the relative position with the tower during the complete rotation process of the blade), the characteristics of wind pressure distributions of the wind turbine system and action mechanism of surrounding flow field were analysed. The effect of different position of blades on the aerodynamic performance of wind turbine in halt state as well as the disturbance effect was evaluated. Results of the study showed that the halt position of blades had significant effect on the wind pressure distribution of the wind turbine system as well as the characteristics of flow around. Relevant conclusions from this study provided reference for the wind-resistant design of large scale wind turbine system in different halt states.