MgCl₂溶液內에서 STS 304 HP Stainless Steel 熔接部의 破壞擧動에 對한 硏究

金永奭,丁太權,朴昌彦,洪錫柱,梁仁榮,金基玉,朴煥奎,李茂錫,曺圭宰,鄭在康 조선대학교 생산기술연구소 1983 生産技術硏究 Vol.1983 No.-

This paper is based on an experiment analysing the stress corrosion cracking behaviour of welding specimens compared to that of non-welding specimens of STS 304 HP stainless steel in corrosion solution. As a corrosion condition, stainless steel has been known to be the most fragile in a solution of 42% MgCl₂heated to the boiling point, therefore the experiment was carried out in this condition. The experiment was carried out with argon gas TIG welding specimens and non-welding ones made of stainless steel plates, thickness 2mm, by tensile force. At this time, the tensile force was taken to be the value of the yield strength of the tensile test specimens divided by the safety factor of 3.0 to 3.5, 4.0, 4.5, and 5.0. In this paper, the relations between Time of Initial Crack, Time of Failure, Time of Final Fracture and Crack Propagation Length were investigated and then plotted. Furthermore, the relations between Stress Intensity Factor K proposed by Irwin and the Time of Initial Crack, the Time of Failure, the Time of Final Fracture were calculated and plotted. At the last, all the relations plotted were expressed to normal equations by computer, and the equations were used to analyse the data obtained in the experiment. The conclusions obtained in this study are as follows: 1. Welding materials, compared with non-welding ones, as the Time of Initial Crack, the Time of Failure, and the Time of Final Fracture were generally very fast, appeared to be a phenomenon of unstable brittleness fracture. 2. Non-welding materials, compared with welding ones, as the safety factor was larger or the working stress was smaller, appeared to be a phenomenon that the longer had had greater durability. Therefor, welding materials must be considered enough to be used in heate affected and stress corrosion atmosphere. 3. The normal equations of the Time of Initial Crack and the variation rate to the same Stress Intensity Factor K are as follows: (A) Non-welding T =259702.4-5451.2 K+28.386 K² T = -5451.2+28.386 K (B) Welding T= -332.693+28.043 K-0.211 K² T' =28.043-0.211 K here, T; Time of Initial Crack, T'; Variation Rate of Time of Initial Crack to Stress Intensity Factor K, K ; Stress Intensity Factor.

Terfenadine과 Ketoconazole 병용투여에 의해 유발된 Torsade de Pointes1예

오석규,국향,임수빈,정진원,박양규,박옥규 대한순환기학회 1998 Korean Circulation Journal Vol.28 No.3

하수 2차 처리수 재이용을 위한 저압 및 중압 고도산화시스템의 성능평가

안규홍,안석,맹승규,김기팔,홍준석,정민우,권지향,Ahmed, Zubair 대한상하수도학회 2003 상하수도학회지 Vol.17 No.4

In the present study, the feasibility of UV/H₂O₂ systems was investigated using low and medium-pres sure lamps on biologically treated wastewater effluents for secondary effluent reclamation. Two types of UV lamps were used as the light sources (a 33W lowpressure mercury lamp and a 350-W mediumpressure mercury lamp). The results from these UV systems showed that the removal of organic compounds could be achieved in the contact time of longer than 30min (i.e., low UV doses). Efficiencies of color removal and disinfection were far better than those of organic matters measured as TOC, DOC and TCOD_(cr). In the low pressure lamp UV system, it has been found that DOC and color removals were 60.9 and 86.2% with 50㎎/L of H₂O₂ and contact times of 30 minute, respectively. Whereas, with the mediumpressure lamp UV system, TOC, DOC and color removal were 27.1, 5.6 and 95% with 14.3㎎/L of H₂O₂ and 14 minute of contact times, respectively. Both systems could be applied for the reclamation of secondary effluent treated with biological treatment processes.

간세포암과 감별이 어려웠던 악성중피종 치험 1예

김선문,허원석,채경훈,강윤세,정재훈,김연수,박기오,문희석,이엄석,김석현,성재규,이병석,이헌영,신경숙,조준식,송인상,강대영 충남대학교 의학연구소 2003 충남의대잡지 Vol.30 No.2

Malignant peritoneal mesothelioma is a rare neoplasm that arises from the mesothelium of a serosal cavity and is a rapidly fatal disease with a median survival of 4 to 12 months for untreated cases. Recently, we experienced a case with malignant peritoneal mesothelioma who was suspected hepatocelluar carcioma by abdominal CT scan and was confirmed by biopsy including immunohistochemical stain(calretinin) after surgery. We performed tumor excisions and wedge resection of the liver(segment Ⅷ)and inserted Tencoff catheter in abdominal cavity at 25th day of post-operation. We treated with intraperitoneal paclitaxel(25mg/m^(2)/day for 5 days) six courses monthly. She was well tolerable and is still living without any evidence of recurrence for 14th month of post-operation.

양측 쇄골하동맥 및 양측 신동맥 협착을 동반한 Takayasu 동맥염 1예

임선호,임수빈,오석규,이재홍,정진원,박양규,박옥규,소병준,노병석 대한순환기학회 1997 Korean Circulation Journal Vol.27 No.8

Gilbert 증후군에서 열량 제한 시험과 Phenobarbital 자극 시험의 의의(14예)

이헌영,채경훈,정재훈,강윤세,김연수,문희석,박기오,이엄석,김선문,김석현,성재규,이병석,이강욱 충남대학교 의학연구소 2003 충남의대잡지 Vol.30 No.2

Gilbert 증후군은 인구의 7%에서까지 나타날 수 있는 매우 흔한 증후군으로서 비진행성인 양성의 만성적 경과를 치하며, 간질환의 증상과 징후가 없는 경한 비포합형 고빌리루빈혈증이 특징인 일종의 체질적인 증상으로서 혈장 빌리루빈 농도에 대한 사춘기의 영향 때문에 10대와 20대에 자주 진단이 된다. 따라서 임상적인 중요성은 미약하지만 높은 빈도가 예상되는 점에 그 중요성이 부여되어야 할 것이다. 따라서 적정한 임상적 진단법으로 기왕에 소개된 열량제한 시험과 phenobarbital 유도 시험을 시행하고 이들의 진단적 가치를 알아보기 위하여 본 연구를 시행하였다. 1990년 7월부터 1999년 4월까지 충남대학교병원에 내원하여 HBsAg, IgG anti-HBc 및 anti-HCV가 음성이고, 간 초음파 스캔에서 이상이 없으며, 혈청 AST, ALT 및 AP가 정상인 비음주자에서 경한 비포합형 고빌리루빈혈증이 있는 14예의 환자들을 대상으로 ^(99m)Tc-DISID 스캔을 시행하였으며, 기저 치 총빌리루빈 및 포합형 빌리루빈 치를 측정한 다음에 하루에 400Kcal로 48시간동안 제한한 열량 제한 시험을 시행하였고, phenobarbital을 하루 60mg씩 5일간 투여한 후에도 각각 총빌리루빈과 포합형 빌리루빈 치를 검사하여 비포합형을 구하였다. 대상 환자들은 모두 14예로서 남자가 11예(78.6%)였고 여자가 3예(21.4%)여서 3.7:1로 남자에서 많았으며, 20대가 6예(42.9%), 30대가 역시 6예(42.9%) 및 40대가 2예(14.2%)로서 2,30대가 대부분(85.8%)이었다. 열량 제한 시험 후의 총빌리루빈 치, 비포합형 및 포합형 빌리루빈 치들은 평균 각각 5.5±2.7, 4.2±2.3 및 1.3±10mg/dL 로서, 시험 전 치들인 3.0±0.8, 2.2±0.8 및 0.7±0.4mg/dL 보다 유의하게(p=0.001, p=0.001, p=0.023) 상승하였다. 포합형 빌리루빈 치도 유의하게 상승하였으나 비포합형의 상승보다는 훨씬 낮아서 주로 비포합형이 증가하였다. phenobarbital 투여 중 설사가 발생하여 중단한 1예를 제외한 13예에서 열량 제한 시험 후에 상승하였던 총, 비포합형 및 포합형 빌리루빈 치가 phenobarbital 유도 시험후에는 2.0±1.1, 1.5±0.8 및 0.5±0.4mg/dL로서 열량 제한 시험 결과보다 유의하게 낮아졌고(p=0.00, p=0.000, p=0.001), 열량 제한 시험 전의 기초치들인 3.0±0.8, 2.2±0.8 및 0.7±0.4mg.dL 보다도 더욱 낮아졌으며 유의한 차이(p=0.001, p=0.02, p=0.005)를 나타내었다. 14예에서 시행한 ^(99m)-Tc DISIDA 스캔에서 9예(64.3%)가 정상이었고, 5예(35.7%)에서는 심장 및 신장으로의 간외 섭취가 3예였고, 60분까지 소장 배출이 없는 배설 지연 예와 담낭 수축 불량 예가 각각 1예 씩 발견되었다. Phenobarbital 투여시험에서 민감도가 열량제한시험에 비해 더 높았다(92.3%와 50.0%). Gilbert 증후군에서 1일 400 Kcal로 48시간의 열량제한 시험과 1일 60mg의 phenobarbital을 5일간 투여하는 유도 시험은 편리하고 유용한 임상적인 진단법으로 이용할 수 있다고 생각된다. 그러나 열량 제한 시험에서는 증가 기준의 통일이 필요하다고 유추되며 phenobarbital 유도 시험이 민감도가 더 높은 것으로 생각된다. Gilbert's syndrome is very frequent and benign chronic process characterized by mild, intermittent, unconjugated hyperbilirubinemia without any symptom and sign of liver disease. Previously intoduced caloric restriction test and phenobarbital stimulation test as two appropriate clinical tests had been examined and their diagnostic values were reevaluated. Fourteen patients with mild, persistent, unconjugated hyperbilirubinemia were included. Subsequently caloric restriction has been applicated by 400 Kcal/day for 48 hours and phenobarbital has been prescribed by 60 mg/day for 5 days. Therafter serum levels of total and direct bilirubin were measured. Most of the patients were third and fourth decade(85.8%) and male predominant. Each basal serum levels of total, indirect and direct bilirubin were 3.0±0.8, 2.2±0.8 and 0.7±0.4 mg/dL. After caloric restriction test, each levels were increased significantly to 5.5±2.7, 4.2±2.3 and 1.3±1.0 mg/dL(p=0.001, p=0.001, p=0.023). After phenobarbital stimulation test for 13 patients had been practiced, increased levels of each bilirubin after caloric restriction test were decreased significantly to 2.0±1.0, 1.5±0.8 and 0.5±0.4 mg/dL(p=0.000, p=0.000, p=0.001) and these levels were significantly lower than basal levels(p=0.001, p=0.02, p=0.005). The sensitivities of caloric restriction test were 85.7%, 50.0%, and 71.4%, 35.7%(1.0, 1.5 mg increase of total bilirubin and 1.0, 1.5 mg/dL increase of indirect bilirubin). The sensitivities of phenobarbital stimulation test were 93.2% and 92.3% at criteria of 1.5 mg/dL increase of total bilirubin and indirect bilirubin. On the diagnosis of Gilbert syndrome, caloric restriction test and phenobarbital stimulation test are convenient and useful diagnostic tools in clinical face. And also phenobarbital stimulation test has higher sensitivity than caloric restriction test. Furthermore, standardization of bilirubin increment would be necessary in caloric restriction test.

플레이트를 이용한 냉간성형 각형강관 T형 접합부에 관한 실험적 연구

석희원,박금성,정상민,조성식,배규웅,문태섭 대한건축학회 2003 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.23 No.2(구조계)

The purpose of this paper is to investigate experimentally the strength and deformation of T-joints to evaluate the structural behavior of truss connection consisted in square hollow steel section with plate. There are the branch plate type in T-joint shapes. Principal parameters are the ratio of the chord width to thickness(2ν=31.3, 22.2, 16.7) and the ratio of branch plate thickness to chord width(βp=0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.75, 0.85). The most important result obtained from this experiment is as follows; The ultimate strength of T-joints increase proportionally as the 2ν ratio decrease, and the βp ratio increase. The others, experimental results are summarized for ultimate strength to displacement, initial stiffness and failure mode of each T-joints.

선천성 수근관 증후군 1례 보고

이규훈,황치문,김민석,김희상,안경회 大韓再活醫學會 1998 Annals of Rehabilitation Medicine Vol.22 No.3

감속기에서의 전달 동력에 관한 연구

황규동,김도석 忠州大學校 2007 한국교통대학교 논문집 Vol.42 No.-

There are many types of reduction drives for industrial uses. However, it is essential to use precision reduction drives for accuracy of position controls on robot systems. Among the precision reduction drives, the cycloid reduction drive is well known for its high performances and widely used in precision industrial field. Cycloid reduction drives are mainly used in manipulators in robot system requiring a characteristic of a high precision control. When we design this cycloid reduction drive, there are many factors that must be considered. First, a geometrical analysis of a tooth shape must be drawn from the basic concept. Secondly, load distribution, stress distribution and sliding velocity on a tooth should be calculated exactly. Finally, a computer software to optimize the design of a cycloid tooth needs developing. In this study, many differentkinds of factors concerning the characteristic of a cycloid tooth were researched on the basis of the analysis of load, stress and sliding velocity on a tooth. The computer expert system to design the cycloid reduction drive was developed using a Visual C++ compiler. In conclusion, the most important factors can be obtained easily as the user put the simple input data.

저온 및 상온 저장한 백미의 품질 특성

박석규,박정로,박미연 순천대학교 기초과학연구소 1994 基礎科學硏究誌 Vol.5 No.-

The Quality characteristics of milled rice stored at 5℃ and room temperature for 6 months were investigated. Major fatty acids of milled rice were linoleic > oleic > palmitic acid. The rice stored at room temperature had slightly lower content of unsaturated fatty acids than that that stored at 5℃. The major volatile compound of the rice was hexanal, and storage temperature did not effect the content of hexanal. The content of volatile compounds of cooked rice differed greatly from uncooked rice ; in boiled rice, hexanal tended to decrease and several unidentified compounds (UN 3, 5, 7) to increase. The starch powder of milled rice stored at room temperature had higher water binding capacity, but had slightly lower iodine value, amylose content, transmittance at 625㎚, swelling power and solubility than that stored at 5℃.