Cu(In,Ga)Se₂ 나노입자을 이용한 광흡수층 치밀화에 따른 Se 분위기의 열처리 효과

윤경훈(Yoon, Kyung-Hoon),김기현(Kim, Ki-Hyun),안세진(Ahn, Se-Jin),안병태(Ahn, Byung-Tae) 한국신재생에너지학회 2006 한국신재생에너지학회 학술대회논문집 Vol.2006 No.06

나노입자를 이용하여 치밀한 Cu(In,Ga)Se₂ 태양전지용 광흡수층을 제조하기 위해 먼저, 콜로이달 방법으로 합성된 20nm이하의 CIGS 나노입자를 저가의 스프레이 법을 이용하여 CIGS 막을 제조하였다. 제조된 CIGS막을 two-zone RTP (rapid temperature Process) 방법으로 Se 분위기 안에서 열처리를 행하였다. 입자의 치밀화를 위해 기판의 온도, Se 증발온도와 수송가스의 유량을 조절하여 CIGS 입자성장을 행하였다. 그러나, Se의 증발온도가 높을수록 CIGS와 MO 박막 사이에서 MoSe₂ 층이 형성되었다. 형성된 MoSe₂층의 부피 팽창으로 인해 하부의 유리기판과 Mo층 사이에서 peeling off 현상이 발생했다. 이러한 Peeling off현상을 억제하면서 CIGS 나노입자 성장을 하기 위해, Se 공급을 빨리 할 수 있도록 Se의 증기압을 높였으며, 최적조건에서 급속 열처리 공정을 통해 CIGS 나노입자 성장과 치밀화를 위한 소결거동을 관찰하였다.

무인운전경전철시스템의 효과적 운영을 위한 사업초기단계 SE적용방안

정수영(Su-Young Chung),박수중(Soo-Choong Park),민경세(Kyung-Se Min),전서탁(Seo-Tak Jeon) 한국철도학회 2011 한국철도학회 학술발표대회논문집 Vol.2011 No.10

Recently the demand regarding reliability and safety of the railroad are increased as built to Driverless LRT system. Therefore PM and SE technique is applied for efficient management of a construction business. In case of SE(System Engineering) in domestic most foreign companies are doing to lead but we are under effort for the environment that a domestic company can lead. In this study We emphasize to SE importance of pre-business for operation to be effective of Driveless LRT system and propose about activities in the SE at requirements definitions and requirements analysis steps of a highest level. To achieve this We propose SE Application Methods of Pre-Business regarding assistance process of project planning evaluation and control and risk management.

Physical & Chemical Deposition Techniques for Cu(In,Ga)Se2-Based Thin Film Solar Cells (초)

( Kyung Hoon Yoon ),( Jae Ho Yun ),( Se Jin Ahn ),( Byung Tae Ahn ) 대한금속재료학회 ( 구 대한금속학회 ) 2007 대한금속재료학회 학술대회 개요집 Vol.2007 No.1

Chalcogenization-Derived Band Gap Grading in Solution-Processed CuIn_<i>x</i>Ga_1–<i>x</i>(Se,S)₂ Thin-Film Solar Cells

Park, Se Jin,Jeon, Hyo Sang,Cho, Jin Woo,Hwang, Yun Jeong,Park, Kyung Su,Shim, Hyeong Seop,Song, Jae Kyu,Cho, Yunae,Kim, Dong-Wook,Kim, Jihyun,Min, Byoung Koun American Chemical Society 2015 ACS APPLIED MATERIALS & INTERFACES Vol.7 No.49

<P>Significant enhancement of solution-processed CuInxGa1-x(Se,S)(2) (CIGSSe) thin-film solar cell performance was achieved by inducing a band gap gradient in the film thickness, which was triggered by the chalcogenization process. Specifically, after the preparation of an amorphous mixed oxide film of Cu, In, and Ga by a simple paste coating method chalcogenization under Se vapor, along with the flow of dilute H2S gas, resulted in the formation of CIGSSe films with graded composition distribution: S-rich top, In- and Se-rich middle, and Ga- and S-rich bottom. This uneven compositional distribution was confirmed to lead to a band gap gradient in the film, which may also be responsible for enhancement in the open circuit voltage and reduction in photocurrent loss, thus increasing the overall efficiency. The highest power conversion efficiency of 11.7% was achieved with J(sc) of 28.3 mA/cm(2), V-oc of 601 mV, and FF of 68.6%.</P>

레이저 가공에서 빔변수가 미치는 영향에 관한 연구

강경구,방세윤,윤경구,황경현,이성국 동국대학교 산업기술연구원 1997 산업기술논문집 Vol.9 No.-

레이저 가공시 조사되는 레이저 빔의 특성을 나타내는 변수 - 예를 들면, 빔의 형상, 초점면과 소재사이의 거리, 빔 강도 분포, 빔의 발산각, 실제 빔이 퍼져가는 양상이 이상적인 Gaussian 빔에 비해 얼마나 큰지를 나타내는 beam quality factor 등 - 이 가공결과에 큰 영향을 미치는 것은 경험적으로 잘 알려져 있다. 특히 원적외선 레이저로 천공, 에칭 또는 엑사이머 레이저로 ablation 가공을 수행할 때는 이러한 빔특성 변수의 영향이 극대화된다. 본 연구에서는 중요한 빔특성 변수의 영향을 가능한 독립시켜 정성적 및 정량적으로 파악하기 위해 연속발진 모드의 레이저빔 사용시 열전도에 의한 손실을 고려하였으며, 문제를 단순화해 빔 또는 가공소재의 상대적인 움직임이 없는 천공 (또는 에칭제거)의 경우에 대하여, 수치모사를 통해 여러 가지 빔 변수의 변화가 가공결과에 미치는 영향을 살펴보았다. 레이저 빔의 초점의 위치를 표면에서 멀리하면 가공깊이는 감소하게 되며, 같은 간격일 때는 소재의 내부에 위치시키는 것이 다소 유리하다. 또한 빔의 발산각이 작고, beam quality factor 값이 1에 가까울수록 깊은 가공을 얻을 수 있음을 파악하였다. In laser machining such as drilling with CO_2 or Nd:YAG laser, and etching or ablation with Excimer laser, one of the most important parameters affecting the machining results is known to be beam characteristics. In this paper a study is performed through a numerical simulation with the appropriate model to investigate the effects of beam parameters qualitatively and quantitatively, especially in the process of laser drilling of ceramics and ceramic composites. Results of different beam conditions reveal that the machined hole becomes deeper as (ⅰ) the beam divergence gets smaller,(ⅱ) beam quality factor approaches unity, and (ⅲ) beam focus lies nearer to the surface of the workpiece.

Ga 함유량에 따른 Cu(In_1-xGa_x)Se₂ 박막 태양전지에 관한 연구

송진섭(Song, Jin-Seob),윤재호(Yoon, Jae-Ho),안세진(Ahn, Se-Jin),윤경훈(Yoon, Kyung-Hoon) 한국신재생에너지학회 2007 한국신재생에너지학회 학술대회논문집 Vol.2007 No.06

Cu(In_1-xGa_x)Se₂(CIGS)는 매우 큰 광흡수계수를 가지고 있으므로 박막형 태양전지의 광흡수층 재료로서 많은 연구가 진행되고 있다. 박막이 태양전지의 광흡수층으로 이용되기 위해서는 큰 결정크기와 평탄한 표면, 적당한 전기적 특성을 가져야 한다. 이러한 특성들은 CIGS 박막의 조성에 큰 영향을 받고 있는 것으로 보고되고 있다. 본 연구에서는 동시증발법을 이용하여 Cu/(In+Ga) 비를 0.9로 고정한 후 Ga 조성(Ga/(In+Ga)의 비 : 0.32, 0.49, 0.69, 0.8, 1)을 변화시켜 Wide band gap CIGS 박막태양전지를 만들었다. 기판은 soda line glass를 사용하였고 뒷면 전극으로는 Mo를 스퍼터링법으로 증착하였다. 또한 버퍼층으로는 기존에 쓰이고 있는 CdS를 CBD(Chemical Bath Deposition)법으로 층착시켰으며, 윈도우층으로는 i-ZnO/n-ZnO를 스파터링 법으로 층착하였다. 그리고 앞면전극으로는 Al을 E-beam 으로 증착하였다. 분석은 XRD, SEM, QE로 분석하였다. 위 실험에서 얻은 결과로는 Ga/(In+Ga)비가 증가할수록 Cu(In,Ga)Se2 박막은 회절 peak들이 큰 회절각으로 이동하였고, 이것은 Ga 원자와 In 원자의 원자반경의 차이에서 기인된 것으로 사료된다. 또한 Ga 조성이 증가할수록 단파장 쪽으로 이동하는 것을 볼 수 있으며, Voc가 증가하다가 에너지 밴드캡이 1.62 eV 이상에서는 Voc가 감소하는 것을 볼 수 있는데 이것은 Ga 조성이 증가할수록 에너지 밴드캡이 커지면서 defect level 이 존재하기 때문인 것으로 사료된다. Ga/(In+Ga)비가 1일 때의 변환효율은 8.5 %이고, Voc : 0.74 (V), Jsc : 17.2 (mA/cm²), F.F : 66.6(%) 이다.

비진공 나노입자 코팅법을 이용한 CIGS 박막 태양전지 제조

안세진(Ahn, Se-Jin),김기현(Kim, Ki-Hyun),윤경훈(Yoon, Kyung-Hoon) 한국신재생에너지학회 2006 한국신재생에너지학회 학술대회논문집 Vol.2006 No.06

A non-vacuum process for Cu(In,Ga)Se₂ (CIGS) thin film solar cells from nanoparticle precursors was described in this work CIGS nanoparticle precursors was prepared by a low temperature colloidal route by reacting the starting materials (CuI,;InI₃,;GaI₃;and;Na₂Se) in organic solvents, by which fine CIGS nanoparticles of about 20nm in diameter were obtained. The nanoparticle precursors were mixed with organic binder material for the rheology of the mixture to be adjusted for the doctor blade method. After depositing the mixture of CIGS with binder on Mo/glass substrate, the samples were preheated on the hot plate in air to evaporate remaining solvents ud to burn the organic binder material. Subsequently, the resultant (porous) CIGS/Mo/glass simple was selenized in a two-zone Rapid Thermal Process (RTP) furnace in order to get a solar ceil applicable dense CIGS absorber layer. Complete solar cell structure was obtained by depositing. The other layers including CdS buffer layer, ZnO window layer and Al electrodes by conventional methods. The resultant solar cell showed a conversion efficiency of 0.5%.

Association between Socioeconomic Status and Altered Appearance Distress, Body Image, and Quality of Life Among Breast Cancer Patients

Chang, Oliver,Choi, Eun-Kyung,Kim, Im-Ryung,Nam, Seok-Jin,Lee, Jeong Eon,Lee, Se Kyung,Im, Young-Hyuck,Park, Yeon Hee,Cho, Juhee Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.20

Background: Breast cancer patients experience a variety of altered appearance - such as loss or disfigurement of breasts, discolored skin, and hair loss - which result in psychological distress that affect their quality of life. This study aims to evaluate the impact of socioeconomic status on the altered appearance distress, body image, and quality of life among Korean breast cancer patients. Materials and Methods: A cross-sectional survey was conducted at advocacy events held at 16 different hospitals in Korea. Subjects were eligible to participate if they were 18 years of age or older, had a histologically confirmed diagnosis of breast cancer, had no evidence of recurrence or metastasis, and had no psychological problems at the time of the survey. Employment status, marital status, education, and income were assessed for patient socioeconomic status. Altered appearance distress was measured using the NCI's cancer treatment side effects scale; body image and quality of life were measured by the EORTC QLC-C30 and BR23. Means and standard deviations of each outcome were compared by socioeconomic status and multivariate linear regression models for evaluating the association between socioeconomic status and altered appearance distress, body image, and quality of life. Results: A total of 126 breast cancer patients participated in the study; the mean age of participants was 47.7 (SD=8.4). Of the total, 83.2% were married, 85.6% received more than high school education, 35.2% were employed, and 41% had more than $3000 in monthly household income. About 46% had mastectomy, and over 30% were receiving either chemotherapy or radiation therapy at the time of the survey. With fully adjusted models, the employed patients had significantly higher altered appearance distress (1.80 vs 1.48; p<0.05) and poorer body image (36.63 vs 51.69; p<0.05) compared to the patients who were unemployed. Higher education (10.58, standard error (SE)=7.63) and family income (12.88, SE=5.08) was positively associated with better body image after adjusting for age, disease stage at diagnosis, current treatment status, and breast surgery type. Similarly, patients who were married and who had higher education had better quality of life were statistically significant in the multivariate models. Conclusions: Socioeconomic status is significantly associated with altered appearance distress, body image, and quality of life in Korean women with breast cancer. Patients who suffer from altered appearance distress or lower body image are much more likely to experience psychosocial, physical, and functional problems than women who do not, therefore health care providers should be aware of the changes and distresses that these breast cancer patients go through and provide specific information and psychosocial support to socioeconomically more vulnerable patients.

Mn-SOD와 GST 유전자 다형성에 따른 유아의 산화손상지표의 분포

신유경(Shin, You-kyung),최지원(Choi, Ji-Won),오세영(Oh, Se-Young),정자용(Chung, Jayong) 한국영양학회 2015 Journal of Nutrition and Health Vol.48 No.6

우리나라 일부 건강한 유아를 대상으로 Mn-SOD Val16Ala, GSTP1 Ile105Val, GSTT1 present/null, GSTM1 present/null 유전자 다형성 분포를 살펴본 결과, Mn-SOD Val/Val형, GSTP1 Ile/Ile형, GSTT1 null 형, GSTM1 null 형이 주된 (major) 유전자형인 것으로 나타났다. 이 중 Mn-SOD Val/Val형은 Val/Ala 또는 Ala/Ala형에 비해 소변 8-OHdG 수준이 유의적이지는 않으나 높은 경향을 나타내었고, GSTP1 Ile/Ile형은 Ile/Val 또는 Val/Val형에 비해 소변 8-OHdG 수준이 유의적으로 낮았다. 간접흡연에의 노출 여부와 간접흡연-유전자 다형성의 상호 작용이 산화손상지표에는 유의적인 영향을 미치지 않는 것으로 나타났다. 이상의 결과로 볼 때 건강한 유아에서 GSTP1 Val allele 보유한 경우 산화적 손상에 대해 취약할 수 있음을 제시하며, 추후 대규모 연구를 통한 검증 및 이들 유전자형을 보유한 대상자를 위한 효과적인 영양 중재방안에 대한 고려가 필요할 것으로 사료된다. Purpose: Genetic polymorphisms in antioxidant defense and detoxification genes may modulate the levels of oxidative stress biomarkers. Methods: A total of 301 healthy preschool-aged children in the Seoul and Kyung-gi areas were recruited. DNA was extracted from blood for genotyping of manganese superoxide dismutase (Mn-SOD) Val16Ala, glutathione S-transferase (GST) P1 Ile105Val, GSTT1 present/null, and GSTM1 present/null polymorphisms by PCR-restriction fragment length polymorphism or multiplex PCR analyses. In addition to a questionnaire survey, the levels of urinary 8-hydroxyl-2-deoxiguanosine (8-OHdG) and plasma malondialdehyde (MDA) were measured by ELISA. Results: Significantly higher urinary 8-OHdG concentrations were observed in GSTP1 Ile/Val + Val/Val genotype (p = 0.030), and tended to be higher in Mn-SOD Val/Val genotype (p = 0.065). On the other hand, exposure to environmental tobacco smoking (ETS) and interaction between ETS and gene polymorphisms did not significantly influence either urinary 8-OHdG concentrations or serum MDA. Conclusion: Based on our findings, GSTP1 Ile/Val gene polymorphisms might modulate the levels of oxidative stress biomarkers in healthy preschool children.

당뇨병-고지혈증 모델동물의 개발

오승현,노경진,박인선,민본홍,두호경,안세영,김용석,성제경 한국환경독성학회 2004 환경독성보건학회지 Vol.19 No.3

Diabetic complication is one of major risk factors leading to vascular disease Such as atherosclerosis stroke, coronary heart disease and etc Several factors affecting the acceleration of diabetic vascular complication have been known such as hypertension hyperlipidemia, immune complex and genetic factors To screen and develop new therapeutics agents for diabetic vascular complication, it is strongly needed to develop animal models for diabetic complications However in rodents models, diabetic complications is not well developed Furthermore to asses￠ the possibility of new therapeutics for diabetic vascular complications, diabetic animal models which have the risk factors of diabetic complications is needed We aim to develop and establish an diabetic animal model which have diabetic complications with hyperlipidemia which is one of risk factors for diabetic complications We induced insulin-dependent diabetes by intra venous injection of streptozotocin (35 mg/kg/day) in RICO rats which is a spontaneous animal model for hyperlipidemia Our models (STZ RICO) showed hyperglycemia, persistent high level of plasma cholesterol and triglyceridemia with severe diabetic renal changes until 28 weeks after induction of diabetes STZ-RICO rats could be used for the evaluations of newly developed diabetic drugs.