Optical Technique to Measure Five-Degree-of-Freedom Error Motions for a High-Speed Microspindle

Hiroshi Murakami1,Norio Kawagoishi,Eiji Kondo,Akira Kodama 한국정밀공학회 2010 International Journal of Precision Engineering and Vol. No.

We present an optical technique to measure five-degree-of-freedom error motions of a high-speed microspindle. The measurement system consists of a rod lens, a ball lens, four divided laser beams, and multiple divided photodiodes. When the spindle rotates with its concomitant rotation errors, the rod and ball lenses, which are mounted to the chuck of the spindle, are displaced, and this displacement is measured using an optical technique. For this study, we decide the design parameters of the optical system using ray tracing, fabricate a prototype of the measurement system, and evaluate it experimentally. The results show that the measurement system has a resolution of 5 nm and can be used to evaluate high-speed microspindle rotation errors.

도쿠시마대학교 Ri-ichi Murakami (촌상리일(村上理一)) 교수 인터뷰

무라카미리이치 ( Ri Ichi Murakami ),김윤해 한국공학교육학회(구 한국공학교육기술학회) 2013 공학교육동향 Vol.20 No.4

埋立과 漁業補償 - 日本 行政法의 視点에서 -

Murakami Takenori 한국토지법학회 1994 土地法學 Vol.10 No.-

Development of New SCADA System for 500kV Substations

Murakami, Juri,Kimoto, Hirofumi,Ono, Manabu,Kasahara, Kuniyoshi,Hayasaka, Yasushi,Ueno, Yasuhide 대한전기학회 2013 The Journal of International Council on Electrical Vol.3 No.1

We developed a new SCADA system for 500-kV substations. To apply existing LAN-based SCADA system for unmanned 275-kV or 77-kV substations, we had to develop three functions. Firstly, the new SCADA system enables that 500-kV substation is supervised and controlled from multiple operating sites. Secondly, the database of the new SCADA system can be downloaded the maintenance data from the SCADA system for 500-kV control center via an IP network. Finally, the new SCADA system has supervisory control capability for manned 500-kV substations. In this paper, we describe these functional over view of the new SCADA system. Currently, 500-kV substations are manned substations. And these substations are supervised and controlled by human operators on sites. Using the new SCADA system, 500-kV substations will be realized remote supervisory control from the 500-kV control center a few years later. Therefore, manned 500-kV substations will convert into unmanned substations.

THE MECHANISM OF ANOXIC WATER GENERATION DUE TO CONTAMINATED SEDIMENTS

MURAKAMI KAZUO,NOBUSAWA YUlCHIRO,KAMEYAMA YUTAKA,KITAMURA TOMOHIRO,KOIZUMI TOSHIMASA 한국수자원학회 2005 한국수자원학회 학술대회 Vol.2005 No.1

A Consideration on a Mode of Inheritance of Feeding Behaviour to Artificial Diets in Silkworm, Bombyx mori L.

Murakami, Akio 한국잠사학회 1994 한국잠사곤충학회지 Vol.36 No.2

Near Net Shape Processing of RE-Ba-Cu-O Bulk Superconductors

Murakami M.,Fujishiro M.,Miyazaki T.,Nariki S.,Sakai N.,Hirabayashi I. 한국분말야금학회 2006 한국분말야금학회 학술대회논문집 Vol.2006 No.1

Several practical applications of melt-textured bulk superconductors require the complex-shaped products such as curved, ring-shaped, and drilled blocks rather than simple shaped pellets. However, melt-textured bulk superconductors are often damaged when they are cut, grinded, or drilled. With the aim of reducing such damages, we have investigated the preparation of the complex-shaped bulk superconductors by previously machining binder-added precursors and pre-sintered precursors. We could produce various complex-shaped bulk superconductors without cracking from these machined precursors

日本における初期鐵器文化の特質 -彌生時代の冶金なき金屬文化-

( Murakami Yasuyuki ) 단국사학회 2013 史學志 Vol.46 No.-

유라시아 대륙 동쪽 끝에 위치하는 일본열도에서는 야요이시대(彌生時代)전기부터 중기로의 이행기(기원전 3세기)에 철기를 사용하기 시작한다. 구주를 중심으로 하는 서일본으로 확산된 철기는 대부분이 중국 혹은 한반도로부터 들여온 주조철기 파편을 재생한 소형철기이다. 1단계의 철기는 소위 단야로에서 생산된 것이 아니고, 석기생산기술과 동일하게 마연하여 생산된 것이다. 단, 이 소형철기의 분포는 한정적이고, 마제석기의 보완적 존재에 지나지 않았다. 단야로에서 철기를 생산하기 시작한 것은 야요이시대 중기 말부터이다. 이후 단야공방은 구주북반부에 밀도 높게 분포하고, 서일본 각지에 점재한다. 다만, 일본열도를 동진할수록 재지생산 가능한 기종은 한정되어 소형철기가 많아지고, 공존하는 마제석기류도 많았다고 보여진다. 이기(利器)조성, 철기조성, 철기생산기술 등 지역 격차가 확인된다. 이러한 전체적인 경향 속에서 종종 집중적으로 대량의 철제품이 출토되는 유적이 동해연안지역, 동부 세토우치(세토우치)지역, 그리고 태평양연안지역에서 확인된다. 동해연안의 산인지방(山陰地方)에서는 아오야카미지치(靑谷上寺地)유적과 같이 대량의 철제품이 출토되었고, 철제품은 박재철기(舶載철器), 구주산 철기, 재래철기의 세 종류가 확인된다. 조잡한 제작방식을 보이는 재래철기는 지역 특산품인 정교한 목제품의 가공구로서 사용되었다고 보여지고, 지역 교역을 뒷받침해 왔다. 그러나 목제품생산에 종속된 철기생산은 그 발전에 한계가 있었다. 한편, 이러한 한계는 철기를 대량으로 생산하고 소비한 구주북부지역에서도 관찰된다. 쿠마모토현(熊本縣) 아소(阿蘇)지역은 일본에서도 철제품과 단야공방이 가장 밀집하는 지역이지만, 야요이시대 종말기에는 철기생산 흔적이 전혀 보이지 않고, 취락자체도 현저하게 쇠퇴한다. 철기를 대량으로 생산하고 소유하는 경제적 우위성이 차세대의 부와 번영을 보증하지 않았음을 보여주는 예이다. 이러한 야요이시대에는 철기와 철기 생산은 지역격차가 크고, 다음 단계로의 발전과 번영의 기초가 되지 않았음을 보여준다. In the Japanese Islands located in the east edge of the Eurasian Continent, use of iron implements started in the transition from the former stage to the middle stage of the Yayoi period (3rd centuries BC). These iron implements diffused on the western part of Japan centering on Kyushu were small tools which were made from the fragments of imported casted iron implements from China or the Korean Peninsula. They were reproduced by polish. The iron implements of this first phase were not produced using what is called blacksmith furnaces, and were produced by the same polish technique as the manufacturing of stone tools. However, this small ironware had deviation in distribution, and were only a complementary existence of the polished stone tools. The iron implements produced by a blacksmith started in the end of the middle stage of the Yayoi period (1st century BC). After the blacksmiths emerged at that time, they were densely distributed in northern Kyushu. In another places in western part of Japan, they were thinly distributed. However, there were regional gaps also in the productional capacity of such factories and the areas which can produce large-sized iron implements and iron farm implements were limited. In the eastern part of Japan, the varieties of iron implements produced in the local areas are limited and small iron implements increases in number. It is remarkable that also polished stone tools lived together with small amount of iron tools. The regional gaps were accepted in many respects, such as composition of sone tools and iron tools, iron implements composition and technique of iron tool making. In the Sea of Japan coastal area, an eastern part Setouchi area and a Pacific coast area are dotted with settlement sites which have a lot of iron implements often intensively in such an overall tendency. For example, Aoyakamijichi site located in San`in region, yield a lot of iron implements. They are classified into three claster, imported, made in Kyushu and local production. Although native iron tools were poor made, they were regarded as having been used as a processing implement of elaborate wooden goods which is a specialty of the area and supported trade of the area. However, the blacksmith section itself subordinate to wooden-goods production had a limit in the development. On the other hand, such a limit is observed also in the northen Kyushu where iron tools were produced and consumed in large quantities. Although the Aso area in Kumamoto Prefecture is an area where iron implements and factories of blacksmith are the most densely distributed in Japan. However, the number of iron implements and factories of blacksmith decreased after this stage and finally even settlement sites disappeared. The economic advantage of producing iron implements in large quantities and possession of them guaranteed neither wealth nor prosperity in this area. Thus, in the range of the Yayoi period, the regional gaps of iron implements and their making are still large. It is noticed that production and possession of iron implements did not guarantee the development and prosperity of the society.

Japanese Domestic Airfares under the Regulatory Regime : What will be expected after the revision of the current charging system?

Murakami, Hideki 한국해운물류학회 2003 해운물류:이론과실천 Vol.- No.5

This paper statistically investigates the charging system of Japanese domestic air fares and predicts the effect of the revision of the current system on the consumer's surplus. Using 222 observations of cross-sectional data from 1995, this paper empirically demonstrates that (a) the fares in the long haul markets were set higher regardless of the number of passengers. (b) in the outstandingly dense markets, the fares were set higher than the predicted full cost level, and (c) in the thin and shorter haul markets, fares were a little lower. Considering the price elasticity of these three types of routes, this paper concludes that the reduction of air fares in the long haul markets (especially dense markets) to the "distance-proportional level" would lead to a substantial gain in consumer's surplus. Furthermore, this gain would surpass the loss of consumer's surplus that might arise in shorter haul routes. There still remains substantial room for the Japanese government to improve the consumer's benefit without worsening, and possibly even improving, the status quo of the airlines.

A Role of Nuclear Factors for Mitochondrial Biogenesis by Exercise in Skeletal Muscle

Murakami, Taro 한국운동영양학회 2004 Physical Activity and Nutrition (Phys Act Nutr) Vol.8 No.2

Enhancement of oxidative capacity in skeletal muscle is one of a major adaptation to endurance exercise training. This adaptation in skeletal muscle is completely dependent on the mitochondrial biogenesis. If the adaptation is integral (or additive) effects of each exercise bout, "exercise signal" should be transferred to nuclei as a signal of "mitochondrial biogenesis". Recent advance of the study demonstrated that some nuclear factors constitute the signaling pathway for mitochondrial biogenesis. These factors involve nuclear respiratory factor-1 (NRF-1), nuclear respiratory factor-2 (NRF-2), mitochondria] transcriptional factor A (mtTFA or Tfam), and peroxisome proliferators-activated receptor (PPAR) γ coactivator-la (PGC-lα). Especially, PGC-1α is believed to be a master regulator of mitochondrial biogenesis. This review will focus on the regulation of these nuclear factors by exercise for mitochondrial biogenesis in skeletal muscle.