사료원료 공급량 및 스크류 회전속도를 달리하여 제조한 배합사료가 넙치(Paralichthys olivaceus)의 성장 및 체조성에 미치는 영향

김경덕 ( Kyoung Duck Kim ),김강웅 ( Kang Woong Kim ),이봉주 ( Bong Joo Lee ),배기민 ( Ki Min Bae ),안철민 ( Cheul Min An ),한현섭 ( Hyun Sob Han ) 한국수산과학회 2014 한국수산과학회지 Vol.47 No.5

The aim of this study was to investigate the effect of diet extruder conditions, such as feed-loading rate and screw speed, on growth performance and biochemical responses in olive flounder Paralichthys olivaceus. Over 8 wks, we used four identical diets (triplicated per treatment) with differing ratios of feed-loading rate (kg/h):screw speed (rpm/min) in a laboratory-scaled twin-screw extruder of 50:640, 80:640, 120:640, and 80:400, designated as EP1, EP2, EP3, and EP4, respectively. Screw speed impacted the buoyancy of experimental diets. Diets produced at a screw speed of 640 rpm/min floated for > 24 hrs, whereas those produced at a speed of 400 rpm/min sank between 10 s and 5 min. Fish that were fed EP1 and EP4 diets grew significantly faster than those fed EP2 and EP3 diets. Fish fed EP1 diets ate and gained weight most efficiently among treatments, a result that is likely to be related to feed-loading rate, i.e., ingredients extruded at a low feed-loading rate may have more time to cook in the pre-conditioner of the extruder. A cooked diet may be easier to digest in fish. Fish fed EP4 diets also showed significant weight gain, as compared to those fed EP2 and EP3 diets. However, we found no differences among treatments in proximate compositions of dorsal muscle, liver, and viscera of fish. Our results suggest that extruder conditions, may influence feed quality, impacting feed efficiency and growth of fish.

A Comparative Experimental Study of the, In-vitro Efficiency of Hypertonic, Saline-Enhanced Hepatic Bipolar and, Monopolar Radiofrequency Ablation

Lee, Jeong Min,Han, Joon Koo,Kim, Se Hyung,Sohn, Kyu Li,Lee, Kyoung Ho,Ah, Su Kyung,Choi, Byung Ihn Korean Radiological Society 2003 Korean Journal of Radiology Vol.4 No.3

선인장 양심실 보조장치의 설계 및 임상적용을 위한 평가

민병구,박찬영,최재순,이혁수,황창모,김삼성,윤걸중,김종원,선경,이경갑,정종태,김원곤 제주대학교 인공심장이식연구소 2001 인공심장 연구 Vol.2 No.1

현재 개발되고 있는 맥동형 이식형 인공심장은 완전이식형 인공심장과 좌심실보조장치 뿐이다. 좌심실보조장치를 장착한 환자의 10~15%가 우심실의 보조를 필요로하고 완전이식형 인공심장의 장착을 위해서는 자연심장을 제거해야하는 상황에서 이식형 양심실보조장치에 대한 필요성이 대두되고 있다. 본 연구진은 완전이식형 인공심장으로 개발된 한국형 인공심장을 개선하여 양심 실 보조장치를 개발하였다. 양심실보조장치는 이동형 작동기식 미케니즘을 이용하고 있으며 에너지 변환장치와 감속기로 구성된 작동기와 혈액주머니, 그리고 내장형 제어기로 구성되어 있다. 선인장 펌프로 명명된 KAH350은 캐뉼라의 연결을 위한 커넥터를 포함하여 길이 177mm, 폭 164mm, 높이 67 이고 무게 780g이며 최대 심박출량은 5L/min 이다. 양심실보조장치로 개발된 선인장펌프는 좌심실보조장치로도 응용이 가능하다. 이식적합성과 생체적합성을 평가하기 위하여 좌심실보조장치로 5회, 양싱실보조장치로 6회의 동물실험을 수행하였다. 각각 최장 28일간 생존하였으며 11회의 동물실험중 장치의 결함에 의한 것이 3회 있었는데 이들은 모두 전자장치의 결함과 방수처리문제였다. 현재 이식적합성과 일박출량을 향상시킨 KAH400모델이 개발중이다. The types of pulsatile implantable artificial hearts that are on the way of development and have been developed are totally implantable artificial heart and implantable left ventricular assist device (LVAD). Approximately 10% to 15% of all patients Implanted with wearable VADs have required right heart support with another device. And it is reluctant to patient who should remove his or her own heart to be implanted with total artificial heart. These situations drive the development of implantable bi-ventricular assist device (BVAD). The Korean BVAD was develophed by modifying the moving actuator type Korean artificial heart. This electro-mechanical BVAD comprises actuator including energy converter and reduction gear train, blood sacs, and internal motor and energy controllers. The KAH350 which is named as 'Cactus Pump' is 177mm in length, 164mm in width, and 67mm in thickness including connectors and nuts. The weight and maximum cardiac output of Cactus Pump is 780g and 5L/min, respectively. The Cactus Pump that was developed as BVAD could be used as LVAD by attaching compliance caps on the 2 ports of one ventricle. The animal experiments were undergone 5 times for LVAD, and 6 times for BVAD. The best records were 28 days survival in both applications. There were 3 times of device failure and they were all associated with electrical connection and hermetic sealing. The KAH400 that has improved anatomical fitting characterisitcs and stroke volume is on development.

Caries Prevention by Use of the Computer Program on Diet Control for Adolescent

Kyoung-Hye Min,Bo-Ram Cho 대한예방치과학회 2017 International Journal of Clinical Preventive Denti Vol.13 No.1

Objective: In order to utilize dietary control, one of ways to prevent dental caries, more easily, the sugar content and viscosity of food were measured to obtain cariogenic index. Using this index, this study is to contribute to having proper eating habits through improvement of eating habits and to the prevention of dental caries through the use of computation program for dietary control. Methods: A 5-day dietary log from 105 students in the first year of high school, who are residing in Cheonan, and the result of survey was entered into the existing computation program for dietary control to examine calorie intake, 3 major nutrients and deficiency of clean food intake count, cariogenic index; S-PHP index and Snyder test were performed to examine the correlation of each category with oral health. Results: The ratio of average daily intake of 3 major nutrients was 62.4:19.9:17.7 respectively, and the average daily intake count of clean food was 2.44±1.71, which was appropriate. The average cariogenic index, 152.89±65.45 min. Since cariogenic index (r=−0.535), S-PHP index (r=−0.338) and Snyder test (r=−0.365) decreased as clean food intake count increased, they showed a relatively high correlation (p<0.01). Conclusion: Computation program for dietary control enables analyzing adolescents’ dietary habits by category and leads them to have proper eating habits through improvements in eating habits, which will result in dental caries prevention and oral health improvements; therefore, utilization of the program for preventive care in clinical environment is recommended.

Improvement of adhesion properties of glass prepared using SiC‑deposited graphite mold via low‑temperature chemical vapor deposition

Kyoung‑Ho Kim,Kuk‑Jin Hwang,Heesoo Lee,Seong‑Min Jeong,이명현,배시영 한국세라믹학회 2020 한국세라믹학회지 Vol.57 No.1

Compression glass molding is a promising technique for mass production of near net-shaped, high-precision, and low-cost optical glass elements. However, the glass molding process causes the damage of glass and the mold during demolding because of the chemical or physical adhesion of the glass to the mold. To overcome this limitation, graphite molds are used owing to their good lubrication and easy machining. However, graphite materials show rapid oxidation at high temperatures in the presence of oxygen. Therefore, in this study, a thin SiC coating layer was deposited on the graphite mold using the chemical vapor deposition (CVD) method to utilize the lubrication properties of graphite and the anti-oxidation properties of SiC. The specimen obtained using the low-temperature CVD method showed high carbon content and good lubrication properties than that obtained using the high-temperature CVD method.

Effects of Supercritical Carbon Dioxide Treatment on Meat Quality and Sensory Evaluation in Soy Sauce and Hot-pepper Paste Marinated Pork

Young Min Choi,Sang Hoon Lee,Jee Hwan Choe,Kyoung Heon Kim,Min Suk Rhee,Byoung Chul Kim 한국축산식품학회 2013 한국축산식품학회지 Vol.33 No.5

The objective of this study was to investigate the effects of supercritical carbon dioxide (SC-CO2) treatment on meat quality and sensory evaluation of marinated pork. Meat marinated in two traditional Korean marinades, soy sauce and hot-pepper paste, and raw marinated meat were then treated with 7.4, 12.2, or 15.2 MPa CO2 at 31.1oC for 10 min. The SC-CO2 treatments had no effect on the meat pH (p>0.05) or Warner-Bratzler shear force (p>0.05). There was no significant difference (p>0.05) in the total loss (sum of treatment loss and cooking loss) between the control and SC-CO2 treated samples at 15.2 MPa (soy sauce marinated pork: 21.78 vs. 18.97%; hot-pepper marinated pork: 21.61 vs. 18.01%). After the SC-CO2 treatment, lighter surface colors were observed in the treatment samples compared to those of the control samples (p< 0.001). However, tasting panelists were unable to distinguish a difference in color or in overall acceptability of the control and treatment (p>0.05). In the case of soy sauce marinated pork, when SC-CO2 applied at 15.2 MPa and 31.1oC for 10 min, treatment samples showed a tenderer meat than the control samples. Therefore, the SC-CO2 treatment conditions had no adverse effects on the sensory quality characteristics of the marinated meat products.

Poly(vinylbenzyl chloride-glycidyl methacrylate)/Polyethylene Composite Anion Exchange Membranes for Vanadium Redox Battery Application

Park, Min-A,Shim, Joonmok,Park, Se-Kook,Jeon, Jae-Deok,Jin, Chang-Soo,Lee, Ki Bong,Shin, Kyoung-Hee Korean Chemical Society 2013 Bulletin of the Korean Chemical Society Vol.34 No.6

Anion exchange membranes for a vanadium redox flow battery (VRB) were prepared by pore-filling on a PE substrate with the copolymerization of vinylbenzyl chloride (VBC) and glycidyl methacrylate (GMA). The ion exchange capacity, water uptake and weight gain ratio were increased with a similar tendency up to 65% of GMA content, indicating that the monomer improved the pore-filling degree and membrane properties. The vanadium ion permeability and open-circuit voltage were also investigated. The permeability of the VG65 membrane was only $1.23{\times}10^{-7}\;cm^2\;min^{-1}$ compared to $17.9{\times}10^{-7}\;cm^2\;min^{-1}$ for Nafion 117 and $1.8{\times}10^{-7}\;cm^2\;min^{-1}$ for AMV. Consequently, a VRB single cell using the prepared membrane showed higher energy efficiency (over 80%) of up to 100 cycles compared to the commercial membranes, Nafion 117 (ca. 58%) and AMV (ca. 70%).

치과용 임플란트 적용을 위한 항균력을 가진 티타늄 표면의 평가

강민경 ( Min Kyung Kang ),문승균 ( Seung Kyun Moon ),김경남 ( Kyoung Nam Kim ) 한국치위생과학회 2011 치위생과학회지 Vol.11 No.5

The aim of this study was to evaluate antibacterial effect of Cl coated titanium. To coat the Cl on the titanium, first, the titanium was modified by blasting treatment with hydroxyapatite and alumina powder. Anodization process was completed using electrolyte solution of 0.04 M β-glycerol phosphate disodium salt n-hydrate, 0.4 M calcium acetate n-hydrate and 1 M NaCl on the condition of 250 voltages for 3 min. Surface morphology and elements` observation were performed with scanning electron microscopy and energy dispersive spectroscopy and surface profiler was used to analyze the surface roughness. Antibacterial effect was evaluated by film adhesion method. The anodized titanium after blasting showed dimpled surface contained the Cl. Surface average roughness of these surfaces had significantly higher compared to polished titanium. Result of antibacterial test showed that anodized titanium after blasting had an enhanced antibacterial effect compared to the polished titanium. Therefore, these results suggested that titanium contained Cl by anodization after blasting had a rough surface as well as antibacterial effect.

흰쥐에서 심정지후 Pentoxifylline이 뇌의 허혈-재관류 손상에 미치는 효과

정시경,김영민,오동렬,최경호,박승현,이운정,박규남,유은영,이원재,김세경 大韓應急醫學會 1999 대한응급의학회지 Vol.10 No.2

Background: Two major events occurring in the cerebral hemodynamics after successful resuscitation from cardiac arrest are reactive hyperemia and postischemic hypoperfusion. In this study, we examined the effect of Pentoxifylline(PTX) on the rat brain following cardiac arrest. Methods: Fourteen rats were anesthetized and artificially ventilated. Cardiac arrest was produced by chest compression and clamping of tracheal tube for 3 minutes in ketamine anesthetized rats. Circulation was restored by standard cardiopulmonary resuscitation methods. In 7 rats, PTX 10mg/kg was infused at 10min after cardiac arrest(PTX group). In the other 7 rats, same amount of normal saline was infused(control group). Results: In both groups, hemodynamic variables, neurologic deficit(ND) score and histopathologic findings of hippocampal CA1 neurons were observed. Hemodynamic variables and ND score were not significantly different between two groups. Delayed ischemic neurons of hippocampal CA1 were decreased in PTX group(2.2±2.4%) compared with control group(9.1±1.2%). Conclusions: We conclude that PTX prevented development of delayed ischemic neurons in hippocampal CA1 after cardiac arrest. PTX may be useful in emergency situations following cardiac arrest.

미더덕의 생리활성이 향상된 아임계수 추출물의 제조

조민지(Min-Ji Jo),한지경(Ji-Kyoung Han),성수창(Su-Chang Sung),이승철(Seung-Cheol Lee) 한국식품영양과학회 2018 한국식품영양과학회지 Vol.47 No.11

미더덕의 이용 다변화를 위하여 아임계수 추출물을 제조하고 생리활성을 평가하였다. 미더덕은 동결건조 분말 상태로 10, 30, 60분 동안 다양한 온도(50, 100, 200, 300℃)에서 추출되었다. 아임계수 조건은 ACE 저해 활성, 항산화 활성, AChE 저해 활성과 같은 중요한 생리학적 특성을 상당히 증가시켰다. 200℃, 60분 추출물에서 가장 높은 ACE 저해활성을 나타냈으나 더 높은 온도 조건인 300℃에서는 급격히 감소하였다. DPPH 라디칼 소거능과 ABTS라디칼 소거능은 300℃, 30분 추출물에서 공통적으로 가장 높은 값을 보였고, AChE 저해 활성 또한 같은 경향을 나타냈다. 이러한 결과는 아임계수 추출이 미더덕의 생리활성을 증가시키는 유용한 가공방법이 될 수 있음을 시사한다. For diverse application of Styela clava (Korean name: miduduck) as a food material, subcritical water (SCW) extract was prepared and its physiological activity was evaluated. To accomplish this, S. clava powder (0.1 g) was placed in a stainless vessel containing 10 mL of distilled water, after which SCW extraction was carried out at 50, 100, 200, and 300℃ for 10, 30, and 60 min. SCW treatment significantly increased important physiological properties of the extract such as angiotensin converting enzyme (ACE) inhibitory activity, antioxidant activity, and acetylcholinesterase (AChE) inhibitory activity. The highest ACE inhibitory activity was found in samples subjected to SCW extraction at 200℃ for 60 min; however, the activity decreased at higher temperature (300℃). The SCW extract of S. clava prepared at 300℃ for 30 min showed the highest antioxidant activity [1,1-diphenyl-2-picrylhydrazyl and 2,2’-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) radical scavenging activities] and AChE inhibitory activity. These results indicate that SCW extraction might be a useful method for increasing the physiological activity of S. clava.