http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Resonant-Frequency-Dependent Flux Noise of a High-TC rf SQUID Coupled to a Substrate Resonator
Ji-Cheng Chen,Hong-Chang Yang,Chiu-Hsien Wu,Herng-Er Horng,Jen-Tzong Jeng,Kuen-Lin Chen 한국물리학회 2006 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.48 No.5I
In the recent development of a high-TC rf SQUID magnetometer, Zhang et al. used a SrTiO3 substrate resonator with a YBCO thin film flux concentrator on it. The effective area was improved by a flux concentrator. However, there was no study of the resonant frequency of the substrate resonator. In this work, the frequency-dependent flux noise of a high-TC rf SQUID coupled to a substrate resonator was investigated. The results were analyzed with the noise theory. The optimization of the SQUID with a substrate resonator and its flux noise are discussed.
Seismic behavior of cross-shaped concrete-filled steel tubular columns
Ji-Cheng Zhang,Xiao-Yu Liu,Lei Zeng,Guo-Feng Du,Jia-Hao Xiao 국제구조공학회 2021 Steel and Composite Structures, An International J Vol.40 No.3
This paper experimentally investigated the behavior of a cross-shaped concrete-filled steel tubular (C-CFST) column subjected to a constant axial load and a low-cycle repeated loading. Nine C-CFST columns with different length-width ratio, width-thickness ratio and axial compression ratio were designed, and the failure mode, hysteresis curve, skeleton curve, ductility, stiffness degradation and energy dissipation capacity of each specimen were studied and analyzed. The results indicated that the cross-shaped steel tube had a strong restraining effect on the core concrete, and C-CFST columns of different sectional dimensions all exhibited favorable seismic behavior, which is suitable for middle-high residential buildings. An increase of length-width ratio enhanced the initial stiffness with a decrease of ductility, and more rapid stiffness degradation during loading. Specimens with smaller width-thickness ratios had higher ductility, stiffness, and energy dissipation capacity. A larger axial compression ratio could reduce the bearing capacity, and cause the stiffness to degrade faster. Moreover, a hysteretic model of C-CFST columns was also proposed based on an analysis of the test results.