Seasonal phenology and damage by Singapora shinshana (Hemiptera: Cicadellidae) and other leafhoppers on ornamental trees in Korea

Kim Hyun‐guk,Kabir Md. Faisal,An Hyeon Jeong,Mwamula Abraham Okki,Oh Sumin,Jung Sunghoon,Lee Dong Woon 한국곤충학회 2021 Entomological Research Vol.51 No.9

Singapora shinshana is a leafhopper native to mid-Asia with a specific host range and is one of the least studied species within the genus. Recently, the species has been found to cause significant damage to host plants including ornamental trees, normally inflicted by its sucking behavior. This study uncovered more details on host and season preference of S. shinshana, damage potential and symptoms caused by its feeding behavior on ornamental trees in Korea, in addition to other records of other leafhoppers of economic importance. During the sticky trap survey period from 2017 to 2019, 12 leafhopper species were recovered from the eight selected ornamental tree species. Singapora shinshana was the most dominant species, constituting 94.8% of the total collected leafhopper population; with its highest incidence observed on Prunus serrulata, followed by Elaeagnus umbellata and Pseudocydonia sinensis. The high abundance on P. serrulata correlated with high damaged leaf percentages of 94.2%, 95.2%, and 98.1% in October 2017, 2018, and 2019, respectively. Interestingly, in terms of damaged leaf percentage, Rosa hybrida and Zelkova serrata were the second and third most damaged hosts despite the significantly lower population of the leafhopper on these trees. Furthermore, S. shinshana counts increased from late-July to late-September, with the peak evident during early August. Prunus serrulata can therefore be taken as one of the main host plants of S. shinshana. However, the potential of the host to suffer damage is not limited to population densities of the pest alone but also susceptibility and tolerance of the host plant.

인공사육장에서 패혈증으로 집단폐사한 북방산개구리의 증례 보고

정여진 ( Yeo Jin Jeong ),김종택 ( Jong Taek Kim ),서국현 ( Guk Hyun Suh ) 한국동물위생학회 2014 韓國家畜衛生學會誌 Vol.37 No.3

Frog culture industry is not yet familiar but has much potential. Generally, in farm, the population density is higher than that of in nature and frog farm is not the exception. But when population density is high, it can easily leads to stressful condition, poor sanitation. When a disease occur, it is a primary factor that makes the population more susceptible and the results more grave. Because of severe Rhabditoidea- helminth infection and subsequent bacterial septicemia, 50¡­70% of the total population had been died in a farm in Jeong-sun in Gangwon-do and Chungju in Chungcheongbuk-do from late June, 2012 to September, 2012. Diseased frogs showed ruptured lung, bloody ascites, liver discoloration, myocardium weakness, congested kidney, microcytic anemia and so on. Enterobacteriacea, Citrobacter.sp, Cupriavidus metallidurans, Acinetobacter.sp were isolated as major bacterium that had caused septicemia in frogs. Among isolated bacterium, Cupriavidus metallidurans, Ewingella americana, Shewanella aquimarina and Pseudoalteromonas sp. have not reported as potential pathogens in frogs before. It is a good example that severe helminth infection in frogs can lead to secondary infection of bacteria.

천공된 비특이성 결장 궤양에 의한 후복막 기종 1예

임정근,김정용,박찬국 대한대장항문학회 1994 Annals of Coloproctolgy Vol.10 No.4

상악 제일대구치의 저항중심에 관한 유한요소법적 분석

조정현,이기수,박영국 대한치과교정학회 1993 대한치과교정학회지 Vol.23 No.2

The purpose of this study was to analyse the center of resistance of the maxillary fitst molar using the 3-dimension finite element method. An extracted maxillary first molar of normal shape and average root length was selected and sectioned every 1.5mm parallel to the cementoenamel junction. Each section was traced and digitized to construct 3-D finite element model of the maxillary first molar. After a certain magnitude of counterbalancing moment(M) was applied to the tooth, a varying single force(F) of distomesial direction was applied to a certain point of th tooth until the tooth was translated. The force producing translation(Ft) was substituted to the equation △d=M/Ft to calculate the center of resistance of the maxillary first molar. And reducing the alveolar bone level 1.68mm, and 3.36mm below to the cementoenamel junction, the tooth movement was analysed to see the effect of reducing the alveolar bone level to the location of the center of resistance. The results were as follows ; 1. The center of resistance of the maxillary first molar was 3.72mm apical, 1.10mm buccal, and 0.71mm mesial to the geometric center of the horizontally sectioned surface at the cementoenamel junction. This point was 0.36mm apical, 1.20mm buccal, and 0.71mm mesial to the trifurcation point, indicating that it was not on the tooth root. 2. As the alveolar bone level was reduced, the center of resistance of the maxillary first molar was moved to the apical direction.

위장관의 원발성 B 세포 악성 림프종의 재분류와 bcl-2, cyclin D1, bcl-6 및 p53 발현의 의미

서정균,김태원,김병수,조은택,박찬국,김만우,이미자,전호종 조선대학교 2001 The Medical Journal of Chosun University Vol.26 No.2

Background and Objectives : In recent years, the REAL (Revised European American Lymphoma) classification provided a new category of MALT (mucosa-associated lymphoid tissue) lymphoma and mantle cell lymphoma in B cell lymphomas. We have analyzed the expression of bcl-2, cyclin D1, bcl-6 and p53 and correlated with the subtypes and histologic grade of primary gastrointestinal B cell lymphoma. Also we investigated the usefulness of immunophenotypic features in diagnosis of low grade B cell lymphoma. Materials and Methods : Twenty-two cases of primary gastrointestinal B cell lymphoma were recategorized in low grade MALT lymphoma, low/high grade MALT lymphoma, high grade MALT lymphoma, and diffuse large cell lymphoma according to the morphological findings. We investigated the expression of bcl-2, cyclin D1, bcl-6 and p53 by immunohistochemical method. Results : The bcl-2 protein expression was higher in the low grade MALT lymphoma than in the high grade lymphoma. The cyclin D1 protein expression was negative in all cases. The expression of bcl-6 and p53 protein was negative in all low grade MALT lymphoma. Conclusion : The results suggest that we can differentiate the low grade lymphoma from the high grade lymphoma by immunohistochemical staining for bcl-2, bcl-6, and p53 protien.

Effect of Dietary Monascus Pigment on the Liver Damage Induced with CCI₄in Rats

윤종국,--,--,--,-- THE KOREAN SOCIETY FOR BIOMEDICAL LABORATORY SCIEN 2003 Journal of biomedical laboratory sciences Vol.9 No.3

In the biological world, there are a number of ecological fights for survival between each organism such as plants, animals and microorganism. In such events, an organism can use its natural bioactive products as defence agent against other organism. Furthermore, natural bioactive products can be utilized for medicine or functional food. Recently, we investigate the effect of Monascus pigment extracted from a fungus, Monascus anke, on the alcohol metabolism and blood lipid profile. In the present study, it is observed that Monascus pigment supplemented dietary may have a hepatoprotective effect on rat's liver damage induced with CCl₄. By treatment with CCl₄(3 times, I.P), liver damage was reduced more in the rats fed 2% Monascus pigment extract supplemented diet than those fed standard diet, based on the serum levels of alanine aminotransferase, microsomal glucose-6-phosphatse activity and hepaic malondialdehyde content. On the other hand, oxygen free radical generating enzymes, hepatic P-450 dependent aniline hydroxylase, xanthine oxidase, and oxygen free radical scavenging enzymes, hepatic glutathione S-transferase, catalase, superoxide dismutase activities were generally higher both in CCl₄, treated group and control fed 2% Monascus pigment extract supplemented diet than those fed standard diet. In conclusion, the rats fed 2% Monascus pigment extract supplemented diet showed more reduced liver damage than those fed standard diet, which may be due to the acceleration of oxygen free radical metabolism.

부식시간이 소의 법랑질 부식깊이와 교정용 레진의 전단결합강도에 미치는 영향

김정훈,이기수,박영국 대한치과교정학회 1993 대한치과교정학회지 Vol.23 No.1

Recent reports indicate that shorter etching times than 60 seconds can be adopted without affecting the bond strength and clinical disadvantages. The purpose of this in vitro study was to compare the shear bone strength and to measure depth of etch at different etching time length. One hundred and eight extracted bovine lower central incisors were embedded each in a tooth cup with cold-cure acrylic resin. The facial surfaces of the teeth were ground wet with 600-, 800-, 1000-, and 1200-grit Sic papers, and finally polished with a water slurry of extrafine silicon carbide powder, washed with tap water, and dried with hot air. Nine groups of nine prepared teeth were etched with a commercial(38% phosphoric acid solution) for 0, 5, 10, 15, 20, 30, 60, 90, and 120 seconds, respectively, rinsed with tap water, and dried with hot air. One conditioned teeth from every group was selected randomly for the scanning electron microscopic examination, and the remaining eight teeth of the groups were used for measuring the push shear bond strengh after bonding brackets and immensing them in the 36.5˚C water for 24 hours. Another nine groups of three teeth were used for measuring the depth of etch and surface roughness with a surface profilometer, after pieces of adhesive tape of 3mm inner diameter positioned on the ground enamel surfaces, and etched with the above mentioned. The data obtained form the above experiments were analysed statistically with one way ANOVA and Dunkan's multiple range test with the 95% confidence level. The results and conclusion of the study were as follows; 1. The results of shear bond strength for the given experimental etching times were not statistically different, but showed the tendency of decreasing shear bone strength after over 60 seconds etching times. 2. On the scanning election microscopic examination, it was observed that the morphological patterns of etched enamel surface for 5 to 20 seconds were similar and consitent, and those for 30 to 120 seconds showed increasing over-etched patterns depending on the length of etching times, but it was not associated with the shear bond strength. 4. The surface roughness increased depending on the length of etching times, but it was not associated with the shear bond strength. 5. This experiment indicated that proper etching time with 38% phosphoric acid solution is in the range of 5 to 30 seconds.

이종마찰압접재의 변형 및 균열 성장 거동 : STS304 와 SM15C재를 중심으로 For STS304 and SM15C

오정국,오환섭,박준건 조선대학교 동력자원연구소 1997 動力資源硏究所誌 Vol.19 No.1

In this study, behavior of crack growth and fracture under static tensile load in friction welded dissimilar materials, and necking phenomenon occuring at tensile yeilding point is shown. Crack is observed in heat affected zone including fine ferrite region of SM15C and heat affected zone of STS304. Plastic flow was occured by friction welding process, so direction of crack is inclined with welded surface. Fracture behavior of similar material is subject to joint of void, but dissimilar material is liable to joint of micro crack. Fibrous zone with the view of macroscope and dimple pattern with the view of microscope is observed at fracture surface.

제1소구치 발치 증례와 비발치 증례에서 하악 제3대구치 맹출에 관한 연구

정규림,박영국,이정민 대한치과교정학회 1993 대한치과교정학회지 Vol.23 No.4

It is the aim of this study to determine the impacts of radicular development of lower third molars on its eruption/impaction and to grope the prediction for eruption and/or impaction in advance. Three hundred and thirty cases of orthopantomogram were employed and classified as mesial root-dominant group, distal root-dominant group and identical group according to the radicular development of lower third molars. This presentation has carried out the incipient mesial inclination, radicular development, impaction/eruption rate and changes of mesial inclination of the very teeth. Consequently the following summary and conclusions were drawn; Radicular development dominated mesial root than the distal and dominant mesial root invited higher potentialities for normal eruption. The mesial or horizontal impactions were detected on the distal root-dominant group. This analysis han been suggested the potential eruption/impaction of lower third molars were dependent upon the radicular development and the incipient mesial inclination.

버팀지지대의 선행하중에 따른 흙막이벽의 거동특성

裵鐘淳,權正烈,權敏載,朴卿局 경상대학교 생산기술연구소 2001 工學硏究院論文集 Vol.1 No.-

Urban excavation require highly reliable prediction technique for the design and construction of earth retaining structures in order to protect adjacent structures around deep excavation. Application of the pre-loading of bracing for deep excavation has been reported and known beneficial in reducing settlement behind the retaining wall. But this beneficial effects are net fully understood and recognized by many practitioners. Model tests have been carried out to evaluate the efficiency of pre-loading system in reducing ground settlement as well as adjacent structural damages around excavation in sand. The test results revealed that the applied pre-loading of approximately 50% showed effective reduction in the maximum lateral wall displacement and the maximum magnitude of ground surface settlements, Also, bracing forces and earth-pressure distribution behind the wal1 have been monitored during pre-loading at various excavation swages.