http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
ION-SELECTIVE ELECTRODES OF FERRITE MEMBRANES
원충택,박면용,오평제,이원,박기채 상명대학교 논문집 1993 상명대학교논문집 Vol.31 No.-
산화제2철 또는 산화제2철과 마그네슘, 구리, 니켈, 혹은 아연을 몰비가 0.6:2.4, 0.8:2.2, 1:2, 1.2:1.8 및 1.4:1.6 (M:Fe, M=Mg, Cu, Ni, Zn) 인 혼합물로 Ferrite막 전극을 만들어 이온 선택성 전극으로 사용될 가능성을 연구하였다. 이들 전극막 재료는 각각 900, 1,000, 1,100, 1,200, 1,300, 및 2,614-2,700℃에서 소결되었다. 소결 온도가 높을수록 이온 감도와 선택성이 컸다. 산화제2철만을 사용하였을 때 보다 산화제2철을 Mg,Cu,Ni 또는 Zn과 혼합하여 2,164-2,700℃ 에서 소결된 전극들이 이온 선택성이 우수하였다. 이들 전극의 전기저항치는 10^2 메그옴정도이다. 모든 전극의 정전앞감응을 pH3 및 10사이에서 관찰하였는데, 은(I), 인산염(III), 인산일수소염(II), 인산이수소염(I) 및 비소(V, III)에 민감하게 감응되었다. 이들전극은 물속에 계속해서 담궈두면 내구도가 6개월 정도였다.
Shear Resistant Mechanism into Base Components
Je-Pyong Jeong,Woo Kim 한국콘크리트학회 2014 International Journal of Concrete Structures and M Vol.8 No.1
In the present paper, a behavioral model is proposed for study of the individual contributions to shear capacity in shearcritical reinforced concrete members. On the basis of the relationship between shear and bending moment (V = dM/dx) in beams subjected to combined shear and moment loads, the shear resistant mechanism is explicitly decoupled into the base components-beam action and arch action. Then the overall behavior of a beam is explained in terms of the combination of these two base components. The gross compatibility condition between the deformations associated with the two actions is formulated utilizing the truss idealization together with some approximations. From this compatibility condition, the ratio of the shear contribution by the tied arch action is determined. The performance of the model is examined by a comparison with the experimental data in literatures. The results show that the proposed model can explain beam shear behavior in consistent way with clear physical significance.
정제평 ( Je-pyong Jeong ),강대흥 ( Dae-hung Kang ) 한국환경기술학회 2018 한국환경기술학회지 Vol.19 No.3
본 연구는 지진에 지배받는 지중 철근 콘크리트 구조물에 대한 동적해석을 수행한 것이다. 지진은 지중 철근 콘크리트 구조물에 심각한 손상을 야기한다. 철근 콘크리트 탄성체와 지반 상호작용모델을 사용할 수 있는 유한요소해석법을 이용하여 지중 철근 콘크리트 구조물의 붕괴 기구를 분석하였다. 지진에 의한 지중 철근 콘크리트 구조물의 붕괴는 수직방향의 중간 기둥의 전단파괴가 주원인이다. 유한요소해석 결과에 의하면, 중간기둥의 국부적 전단파괴 이후 기둥의 축방향 성능이 약화되면서 외측 뼈대구조가 갑자기 붕괴되는 경향이 나타난다. 특히 중간슬래브의 전단응력이 최대 전단강도를 초과하면 구조물은 급작스럽게 파괴된다. 즉 S파에 의한 수직 지반 움직임의 결과로 지중 철근 콘크리트 구조물의 중간슬래브에서 붕괴기구가 발생할 수 있다. This paper presents dynamic analysis of underground reinforced concrete structure subjected to earthquake. Earthquakes brought serious damage to underground reinforced concrete structure. For studying the collapse mechanism of underground reinforced concrete structure, seismic response of underground reinforced concrete structure is simulated in using FEM program SAP2000 of two-dimension based on the path dependent reinforced concrete elastic model, soil foundation and interfacial models. The shear failure of intermediate vertical columns is found to be the major cause of the structural collapse. According to FEM(finite element method) simulation of the failure mechanism, it was considered that the reinforced concrete column would be lost the loading capacity of axial after the occurrence of the localized diagonal shear cracks, and sudden failure of the outer frame would be followed. Specially, the shear stress in the middle slab reaches maximum shear capacity. Therefore the collapse mechanism of the underground reinforced concrete structure would be failed in the middle slab as a result of the vertical ground motion by secondary wave(after S-wave).
정제평 ( Je-pyong Jeong ),김민환 ( Min-hwan Kim ) 한국환경기술학회 2015 한국환경기술학회지 Vol.16 No.1
본 연구는 철근콘크리트 보에서 전단파괴의 합리적 거동 모델에 기반한 통합적 설계 기술을 개발하기 위해 노력한 것이다. 제안 모델은 휨과 전단에 지배 받는 균열이 발생한 철근콘크리트 보에서 전체적인 내력 흐름 상태를 표현할 수 있는 내력상태계수(아치계수)의 새로운 개념을 고려하였다. 복부 전단철근이 없어 전단 파괴하는 철근콘크리트 보의 경우, 한계전단균열은 휨균열 근처에서 시작된 후 평형조건에 기반하여 이론적으로 형성된다. 추가로 Kim에 의해 잘 알려진 응력집중계수가 경사 전단균열강도를 예측하는 공식에 주요 인자로 사용되었다. 제안한 실용적 전단설계 공식은 발표된 실험자료를 사용하여 검증하였다. 제안한 모델의 개념은 복부 전단철근이 없는 철근콘크리트 보에서 복부 전단파괴와 같은 휨전단 파괴 원인과 기구를 합리적으로 설명할 수 있을 것으로 판단된다. This paper describes an attempt to develop a unified design approach for reinforced concrete beams failing in shear based on a rational behavioral model. This model is incorporated with a new concept of the internal force state factor (Arch coefficient) that can represent global state of internal force flow in cracked reinforced concrete beams subjected to shear and bending. For reinforced concrete beams with no web reinforcement failing in shear, critical-shear cracking behavior is theoretically formulated based on equilibrium consideration of the beam end part after onset of nearby flexural cracking. In addition, the well-known stress concentration factor by Kim is also included as a main parameter in the formulation to predict diagonal shear cracking strength. The practical shear design equation is verified by using published experimental data. The concept of the proposed model can provide a comprehensive description of the cause and mechanism of flexural shear failure as well as web shear failure in reinforced concrete beams with no web reinforcement.