전산화 단층촬영과 생체 전기저항 분석법으로 측정한 내장지방과 비만관련 지표의 연관성

임제연 ( Je Yeon Lim ),송윤경 ( Yun Kyung Song ),임형호 ( Hyung Ho Lim ) 한방재활의학과학회 2011 한방재활의학과학회지 Vol.21 No.4

Objectives: In this study, we used both visceral fat area(VFA)/subcutaneous fat area(SFA) ratio(V/S ratio) and bioelectrical impedence analysis(BIA) for a comparative study between VFA measured from several abdominal computed tomography(CT) images and obesity indexes, such as body mass index(BMI), waist circumference(WC), and waist-hip ratio(WHR). Methods: A group of 63 test subjects were gathered in the oriental medical hospital of Kyung-Won university. BIA for body composition and body size for obesity indexes were estimated to evaluate the obesity indexes. Pearson correlation coefficients and regression analysis were used to select useful obesity index. Results: The VFA-CT was significantly related to BMI, SFA, WC, hip circumference(HC), body fat mass(BFM), basal metabolic rate(BMR), and VFA-BIA. Especially, we found that the VFA-BIA and BMI were significantly correlated to VFA-CT. Conclusions: VFA-BIA index is an optimized index for diagnosis and evaluation of obesity. Finally, we found that the BMI is optimized to represent VFA.

Effect of two different calcium hydroxide paste removal techniques on apical leakage : an electrochemical study

Park, Chan-Je,Jeon, Kyung-A,Kwon, Ho-Beom 大韓齒科保存學會 2006 Restorative Dentistry & Endodontics Vol.31 No.3

본 연구의 목적은 근관내 약제로 사용되는 수산화칼슘의 제거방법이 근관충전 후 치근단 미세누출에 미치는 영향을 알아보기 위함이다. 70개의 발거된 단근치를 엔진구동형 ProFile로 근관형성한 후 수용성 수산화칼슘 제제를 1주일간 적용하고 두 군으로 나누어 각기 다른 방법으로 제거하였다. A군은 NaOCI로 근관세정만을 시행하였으며, B군은 근관형성 시 사용된 file보다 한 단계 큰 크기의 ProFile을 사용하여 근관을 재형성한 후 NaOCI로 세척하였다. 근관충전 후 전기화학적 방법으로 24일 동안 치근단 누출을 측정, 비교하였다. 본 연구의 결과 수산화 칼슘 제거를 위한 두가지 방법은 근관충전후 치근단 미세누출에 있어서 차이가 없음을 알 수 있었다. This study evaluated the effect of two different calcium hydroxide (Ca(OH)_(2)) paste removal techniques on the apical leakage of canals obturated with gutta percha cones and sealer after removing a Ca(OH)_(2) dressing using an electrochemical method. Seventy extracted single-rooted teeth were instrumented on with Profile rotary files under NaOCI irrigation. Fifty-eight canals were filled with calcium hydroxide paste, which was then removed using one of the following two techniques. In group A, calcium hydroxide was removed using only NaOCI irrigation, and in group B, the canals were re-prepared with a Profile rotary files-one size larger than the previous instrument and were irrigated with NaOCI. In both groups, the root surfaces were coated twice with nail varnish from CEJ to an area 4㎜ away from the apex after canal obturation. Apical leakage was measured using an electrochemical method for 24 days. All the specimens showed leakddffqage that increased markedly in the first three days. There was no significant difference between the two groups (p > 0.05). The effect of two calcium hydroxide paste removal techniques on the apical leakage was not different during a short period.

실리카흄을 흔입한 고강도 콘크리트 개발

홍창우,김태경,김경진,김성환,김남윤,심도식,이정호,윤청호,백민경,원치문,박제선,이주형,정경일 강원대학교 석재복합신소재제품연구센터 1996 석재연 논문집 Vol.1 No.-

콘크리트 구조물이 대형화됨에 따라 설계단면이 증대되어 상대적으로 많은 경제적 손실을 부담하게 된다. 따라서 단면을 감소시키면서도 소요의 하중에 안전한 구조물을 건설하기 위해서는 우선적으로 구조물 건설에 기초가 되는 고품질, 고내구성의 고강도 콘크리트 개발이 절실히 요구된다 본 연구에서는 일정 시멘트비 및 혼화재 비율하에서 소요의 워커빌리티가 확보되는 고강도 콘크리트를 시간과 온도의 변화에 따라 증기 양생하여, 압축, 인장, 휨강도 뿐만 아니라 파괴특성을 실험적으로 연구하였다. 시료 제작시 시멘트 입자 사이의 공극 및 불연속 영역을 충전하여 고밀도화하기 위한 콘크리트용 혼화재로 시멘트 비표면적이 상당히 작은 초미립 분말인 실리카흄을 이용하였다. 또한 AE감수제 및 고성능 유동화제를 사용하여 혼화재의 첨가에 의하여 발생될 수 있는 워커빌리티의 감소를 방지하였다. 실험결과에 의하면 일정 양생 지속 시간하에서 온도의 증가에 따라 콘크리트의 압축, 인장 및 휨강도가 전반적으로 증가하였다. 동일하게 일정 온도하에서 양생 지속시간이 커짐에 따라 강도들이 증가됨을 알 수 있었다. 따라서 상대적으로 높은 온도와 긴 지속 양생 조건하에서 파괴에 대한 저항력이 크게 나타났다. The compressible, tensible, and flexibleresistance of the high strength concrete is analyzed by the experimentation in the present study. For the test, we cure several samples with the silica fume as a mixture being become dense the spaces between the particle of cement under the variation of both the temperature and the curing-interval. Then, the superplasticizer and the ezcon are also used to satisfy the required workability for construction. The compressible, tensible, and flexible resistances to a stress are increased as increasing the temperature and the time interval for the curing. Therefore it is concluded that the overal fractural and mechanical properties is improved by mixing the silica fume into the cement.

당뇨병-고지혈증 모델동물의 개발

오승현,노경진,박인선,민본홍,두호경,안세영,김용석,성제경 한국환경독성학회 2004 환경독성보건학회지 Vol.19 No.3

Diabetic complication is one of major risk factors leading to vascular disease Such as atherosclerosis stroke, coronary heart disease and etc Several factors affecting the acceleration of diabetic vascular complication have been known such as hypertension hyperlipidemia, immune complex and genetic factors To screen and develop new therapeutics agents for diabetic vascular complication, it is strongly needed to develop animal models for diabetic complications However in rodents models, diabetic complications is not well developed Furthermore to asses￠ the possibility of new therapeutics for diabetic vascular complications, diabetic animal models which have the risk factors of diabetic complications is needed We aim to develop and establish an diabetic animal model which have diabetic complications with hyperlipidemia which is one of risk factors for diabetic complications We induced insulin-dependent diabetes by intra venous injection of streptozotocin (35 mg/kg/day) in RICO rats which is a spontaneous animal model for hyperlipidemia Our models (STZ RICO) showed hyperglycemia, persistent high level of plasma cholesterol and triglyceridemia with severe diabetic renal changes until 28 weeks after induction of diabetes STZ-RICO rats could be used for the evaluations of newly developed diabetic drugs.

식품 기준·규격의 합리적 관리 ·운영에 관한 연구(Ⅰ) : 두부,식용유지, 전분의 분말상 원료에 관하여 Powdered marerials of Tofu, Edible oil, Starch

김희연,홍진환,박혜경,한상배,박종석,이은주,이정성,송경희,최은희,최영준,소경아,성영제,이주엽 식품의약품안전청 2000 식품의약품안전청 연보 Vol.4 No.-

본 연구는 분말상 원료(전분, 대두분)의 저장유통시 품질변화를 건전성과 안전성 측면에서 검토하여 식품의 기준 ·규격 설정f.」 합지적으로 반영하고자 하였다. 전분과 패두분의 이물을 검사하고, 2종 대두분(중국산, 미국산)을 ?0일간 IS'c와 30t에 저장하면서 성상, 수분, 산가, 과산화물가, 지방산 조성,아플라톡신 BB의 생성여부를 분석하였다. 중국산 대두분 30'』 저장군에서 50일 이후 곰팡이가 발생한 것 이외에 모든 시료에서 양호한 성상을 나타내었고, 전분과 대두닥 모든 시료에서 이물은 검출되지 않았다. 산가는 중국산과 미국산 시료간에 편차를 보여 증국산 30"C, 50일 저장시료에서 약 10배끙도 증가하였고, 과산화물가는 저장 90일후 15'E 저장군은 약 2.3배, 30'c 저장군은 3배정도 증가하였다. 대두분의 주요 지방산은 linoleic acidf18. 2), oleic acid(18 : 1), palmitic acid(16 : 0)이었으며, 3개월 저장에 따른 지방산 함량의 변화는 미미하였다. 아플라톡신 B₁은 모든 시료에서 검출되지 않았다. The objective of this study was to investigate auality changes of type raw materials(starch, soy flour) during various storage conditions. Starchflour(source of China, U.S.A) were slfred under two temperature(15'C, 30'c) forSensory evaluation, (o.reign material test, moisture content, acid value, peroxide ualue,composition, aflatorin Bi were analyzed. China soy flour(stor·ed 30'f) was contaminated by fungj on 50 days. Except for soy flour contardnated by fungi, sensory characteristics were not changed and foreign mater;als were notdetected. Acid value of China soy flour(stored at 30'C, 90 days) was about 10 times higherlevel before storage and acid value was more influenced by source(China, USA). Peroxide valuewas in proportion with the storage period slightly. The major fatty acid of soy flour waslinoleic acid(18 . 2), an(3 the change of fatty acid composition was not observed. Aflatoxlrl Blwas not detected.

Protective Effects of N-acetylcystenine and Selenium against Doxorubicin Toxicity in Rats

Yeo-sung Yoon,Sun-don Kim,Min-hye Lee,Heung-shik S.Lee,In-se Lee,Je-kyung Sung,Eun-sung Park 대한수의학회 2003 Journal of Veterinary Science Vol.4 No.2

Effects of N-acetylcysteine and Selenium against Doxorubicin Toxicity in RatsEun-sung Park, Sun-don Kim1, Min-hye Lee, Heung-shik S. Lee, In-se Lee, Je-kyung Sung and Yeo-sung Yoon*

성장호르몬 결핍을 동반한 KMT2D 돌연변이 Kabuki 증후군 환아에서 성장호르몬 치료 반응

김제경, 공진경, 한헌석 충북대학교 의과대학 충북대학교 의학연구소 2016 忠北醫大學術誌 Vol.26 No.1

본문참고

생검재료를 토대로 한 심재성 진균증

윤경애,지제근 대한병리학회 1990 Journal of Pathology and Translational Medicine Vol.24 No.4

土壤微生物劑處理가 가을무의 收量에 미치는 影響

金炅濟,金碩均 동국대학교 산업기술환경대학원 1998 산업기술논총 Vol.4 No.-

This study was carried out to investigate the effect of soil microorganisms on yield of radish (Raphanus sativus L.). Six soil microorganisms, MPK+Husk+Palma, Husk+Palma, MPK+Compost, Compost, Bio livestock cattle system (BLCS) cattle dropping, and Tomi, were used. All of soil microorganisms were very effective to increase yields of radish. Especially, MPK+Husk+Palma treated plot was the most effective than any other plots. As a result of analysis of plant chemical components, compost treatment showed higher concentration of Mn than other soil microorganism treatments. In a chemical components of soil, concentrations of P and Mg were increased with Tomi treatment, and Na was increased with BLCS cattle dropping treatment. The other concentrations of plant and soil chemical components were not different, however. In a microbial properties of soil, Tomi, Husk+Palma, and MPK+Husk+Palma treated plots increased in the number of total bacteria and bacilli. Tomi treated plot increased in the number of actinomycetes and Fungi. The other microbial properties of soil were not different. It would be assumed that yield increase of radish might be due to the beneficial microbial properties, therefore, those would increase yields of radish.

양생온도변화에 따른 콘크리트의 강도 예측

박제선,김태경,이주형,윤청호 江原大學校 産業技術硏究所 1997 産業技術硏究 Vol.17 No.-

The maturity concept was adopted to predict the strength of concrete, which was subjected to several temperature levels and variable curing conditions. Penetration test and compressive test were conducted to measure the initial and final setting time and the compressible strength of concrete specimen, respectively. Also, the temperature and time were measured at some time intervals for calculating the maturity. The initial and final setting were delayed as the w/c ration increased and curing temperature decreased. The relationships at the relative strength and the equivalent age were proposed at different w/c ratio for the several temperature curing conditions, and these were applied for the variable curing conditions.