AHP를 이용한 CT 및 MRI의 비용편익분석

조근태,김성조,김성민,김용우,김성재,조용곤 한국경영과학회 2004 經營 科學 Vol.21 No.2

The imports of used medical equipment such as CT, MRI have been rapidly increased every year. How to manage those medical equipment has been one of critical issues in the government sector. In this study, we demonstrate how benefit/cost analysis using the Analytic Hierarchy Process (AHP) can be applied to the comparison of used CT/MRI and new CT/MRI. The final results show that the new CT/MRI is more attractive than the used CT/MRI.

논에 있어서 포장정보 공간변이의 공간통계학적 해석

이충근,손연규,성제훈,정인규,김상철,박우풍,박원규 한국국제농업개발학회 2002 韓國國際農業開發學會誌 Vol.14 No.2

논에 있어서 정밀농업을 위한 기초자료수집과 분석을 하기 위해서 토양의 특성, 포장면 고저차, 생육상태 그리고 수량에 관한 포장정보를 조사한 결과 아래와 같은 결과를 얻었다. 가. 기본통계값을 살펴보면 유효태 규산의 경우는 한 포장내 14배 이상의 변이차이를 보였으며, 생육정보 중 분얼수는 3배, 수량은 4배 이상의 차이를 보였다. 나. 포장정보의 변이계수를 살펴보면 5.45∼51.3%의 공간변이를 보였다. 토양특성 중에 pH를 제외한 나머지가 10%이상의 공간변이를 보였다. 포장면 고저차는 51.3%, 생육정보는 7.32∼23.2%, 그리고 수량에 있어서도 변이계수가 22.5%를 보였다. 다. 포장정보를 공간통계학을 이용해 해석한 결과, 포장정보의 공간구조 발달여부를 표시하는 Q값이 0.24∼1로서 공간구조가 포장정보에 따라서 발달되어 있었으며, 공간변이의 의존거리를 나타내는 랜지는 8.1∼147.9m를 보였다. 그러나, 실질적인 랜지는 토양특성값이 15∼50m 정도, 생육정보는 15m 전후, 포장면 고저차는 30m 정도, 수량은 8.1m를 보였다. 이것을 기초로 하여 크리깅 방법으로 데이터를 보간하여 지도화 시킨결과, 공간변이를 이해하는데 유용하게 이용될 수 있는 포장정보 지도를 얻을 수 있었다. Soil properties, relief of field surface, growth information, grain yield were investigated in a 1ha paddy field in 2001 to obtain basic field information for precision agriculture. The field information were analyzed to examine their within field variability using descriptive statistical method. Semivariograms and Kriged maps of geostatistical analysis were also adopted to examine their within field spatial dependence. The results obtained were as follows ; 1) Nutrient distribution difference of available SiO_2 was seemed 14 times overs, 3 times overs at tiller number, 4 times overs at grain yield from within a paddy field. 2) Descriptive statistics of field information showed that the coefficient of variation ranged from 5.45∼51.3%. 3) Field information showed a high spatial dependence within a paddy field. The Q values ranged from 0.24∼1, the ranges of spatial dependence were from 8.1∼50m, respectively. 4) Kriged maps enable the visualization and comparison of the spatial variability of field informaton.

비노출 방수층의 윤하중 시험 및 평가방법 개발에 관한 실험적 연구

송제영,오상근,윤하중 서울産業大學校 2005 논문집 Vol.54 No.2

There are a lot of problem about waterproofing membrane coating for concrete deck of bridge because it couldn't confirm waterproofing's defeat after construction. These problems make a waterproofing material damage and concrete deck of bridge damage. So it needs a lot of money for repair and reinforcement work. Therefor the structure slab of using waterproofing material must have the performance to protect invasion of water. Also, concrete deck of bridge need a endurance permeability for the reduction repair payment. This study is experimental study on the quality standardization test method of waterproofing layer on working of live load

Chinese hamster 난소세포에서 수용성 니켈에 의해 특징적으로 발현되는 유전인자들의 빠른 분석에 관한 연구

성근제,이상한,우기민,송호연,조만희 순천향의학연구소 2001 Journal of Soonchunhyang Medical Science Vol.7 No.2

니켈에 의한 암 발생기전 및 세포 독성기전을 이해하고 니켈에 의해 발현에 변화를 보이는 유전자들을 검출하기 위하여 니켈이 포함된 배지에서 배양된 Chinese hamster난소 세포부터 mRNA differential display 분석을 시행하였다. 본 연구에서는 동위원소나 DNA염기서열 분석용 젤을 사용하는 기존의 방법 대신에 훨씬 빠르고, 다루기 쉽고 안전성을 지닌 변형된 기법을 개발하여 적용하였다. 니켈에 의해 발현에 변화를 보이는 cDNA fragments들을 10% polyacrylamide mini젤상에서 분리 및 클로닝한 다음, DNA염기 서열 분석과 GenBank Blast search 프로그램을 이용하여 상동성 조사를 하였다. Reverse Northern blot을 이용하여 발현에 변화가 있는 cDNA들을 재확인한 결과, 검사된 19 cDNAs 들중 총 9종에서 발현의 변화를 보였으며, 이 중 3종은 니켈에 반응하여 발현에 증가를 보였고, 반면에 6종은 발현이 감소하였다.

Transthyretin의 Glutathione 자동산화 촉진작용

박종근,정신,김재휴,김수한,강삼석,이제혁,안봉환 대한신경외과학회 1994 Journal of Korean neurosurgical society Vol.23 No.8

When reduced glutathione(GSH) was incubated at neutral pH and at 37°, its concentration decreased slowly with formation of oxidized glutathione(GSSG). Autooxidation of GSH was accelerated by Cu^(2+) and Hg^(2+), but not by other common mono-, di-, and tri-valent cations. Transthyretin was found to stimulate autooxidation of GSH in the presence or absence of Cu^(2+) and Hg^(2+). EDTA inhibited perfectly the autooxidation of GSH regardless of the presence of transthyretin. The stimulating activity of transthyretin was maximal at pH 7.0, declining progressively with increase or decrease of pH from 7.0. Sulfhydryl-blocking agents such as p-hydroxymercuribenzoic acid and Nethylmaleimide markedly inhibited the stimulating activity of transthyretin. Transthyretin stimulated autooxidation of other sulfhydryl compounds such as clithiothreitol and cysteine. However, it did not show a significant effect on autooxidation of sulfhydryl group of egg albumin and eye lens proteins. And transthyretin did not cause any oxidative change to thyroxine(T₄), 3, 5, 3Ltri iodo thyronine(T₃) and 3, 3: 5~triiodothpnine(rT₃) bound to it in the presence of GSH and Cu^(2+). The above results suggest that transthyretin may play a role in regulation of oxidized status of sulfhydryl groups in blood plasma and cerebrospinal fluid

강우시 소옥천에서의 비점오염원 유출 특성

오영택,박제철,김동섭,류재근 한국물환경학회 2004 한국물환경학회지 Vol.20 No.6

The aims of this study are the characterization of runoff from nonpoint source, the analysis of the pollutant loads and an establishment of a management plan for nonpoint source of Okcheon. For this purpose the basin of the stream So-okcheon was selected to the investigated. During the period from May 29 to July 21 in 2003, the water automatic sampler system has been installed in Okkagkyo and parameters such as SS, COD, TOC, TP and TN were analyzed. The pollutants of nonpoint source seem to be washed out along the stream water in the beginning of rainfall, remain in water and cause the stream pollution. The runoffs during heavy rainfall, especially, much higher concentration of SS than those during dry period. With respect to the annual loading of pollutants of the nonpoint source, the COD was 124 ton/yr, TOC 396 ton/yr, TN 1,429 ton/yr and TP 4.2 ton/yr in the year 2002. With respect to the pollutants loading of the nonpoint source, the COD was 375 ton/yr(95% of the total COD loading of 394 ton/yr), TOC 844 ton/yr(96% of the tatal TOC loading of 876 ton/yr), TN 1,985 ton/yr(96% of the total TN loading of 2,062 ton/yr) and TP 37.1 ton/yr(92% of the total TP loading of 40.3 ton/yr) in the year 2003.

단열양생을 이용한 고강도 콘크리트 압축강도 추정에 관한 실험적 연구

조규현,김제섭,전판근,백민수,김우재,정상진 대한건축학회 2004 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.24 No.1(구조계)

The present study is a basic experiment on the estimation of the compressive strength of high strength concrete, aiming at estimating the compression strength of mass test pieces of high strength concrete by giving the temperature hysteresis of the mass test pieces to managerial test pieces. Different from ordinary concrete, high strength concrete generally shows the high rise of temperature caused by hydration heat inside the concrete. It is known that, in mass concrete, thermal stress occurs due to the difference in temperature between the inside and the outside, which causes a significant difference in compression strength between structure beams and managerial test pieces. It is also reported that there is a large difference between the compression strength of cylindrical managerial test pieces of standard underwater curing and the strength of structure beam concrete. Thus, this study made concrete test pieces in an optimal mix ratio for each strength level, and also created adiabatic curing tank and managerial test pieces. Then it carried out comparative analysis in relation to core strength and suggested equipment and a technique that can control the strength of high strength concrete mass more conveniently and accurately.

反復演習 類型의 CAI 프로그램 設計 및 具現

이상정,안종근,송제국 순천향대학교 1994 논문집 Vol.17 No.3

The use uf computer in learning has advantage of providing various function of audio-visual education regardless of places, especially it enables us to overcome the limitation of individual learning in traditional instruction. Today a lot of CAI courseware is developed and used. But most of them are limited on only one unit or one subject. Because of their lack of sequence in learning, there are problems of systematic learning and connection among grades. The purpose of this study is to design and develope a drill & practice CAI courseware which is proper to realize sequence among grade and easy to feedback. The results of this study are as follows: 1. After choosing arithmetics of the 5th and 6th grade of elementary school, it is designed and developed a 32 sub-subjects CAI program according to the 17 subjects in 3 units. 2. This program is implemented menu-driven meihod in order to learn total arithmetics learning. It will be completed by a following study or research for unimplemented parts.

산업용 팬의 설계 S/W 및 시험용 금형 개발

강재관,오건제 慶南大學校 附設 工業技術硏究所 1999 硏究論文集 Vol.17 No.-

본 논문에서는 공조용 냉각탑에서 사용되는 축류팬의 최적 설계 기술의 개발 및 이를 이용한 금형 제작을 다루었다. 팬 블레이드 주위의 3차원 유동 해석을 기반으로 저소음, 고효율을 보장하는 설계 방법을 개발하였고 이를 CAD/CAM 시스템을 이용하여 3차원 스파인 곡면으로 모델링한 후 시험용 금형을 제작하였다. 특히 설계 방법은 Win95 환경에서 3차원 곡면 모델링을 이용하여 구현함으로서 사용자가 쉽게 이용할 수 있도록 하였다 In this Paper, an optimal design systems and die manufacturing of axial fan for cooling towers is developed. The design is based on 3-D flow analysis to ensure low noise and high efficiency. Three dimensional surface modeling and computer graphics is introduced to display the design data on computer, and CAD/CAM systems are used for modeling and manufacturing its die. The design and die manufacturing processes are automated through a self-made interface program which converts the design data to a part program for CAM system. It is shown that the newly developed fan has a superior performance characteristics to an existing fan.

강의 현대화 추진 및 활용방안 연구

구경완,이근복,장종국,김재홍,김영환,최제영,이승훈 永同大學校 1997 硏究論叢 Vol.3 No.1

본 연구는 각종 첨단 기자재를 활용한 강의 현대화 방안을 모색함으로서 공학교육의 효율성을 도모하고 학생들의 학습동기를 유발하여 창조적 능력을 갖츤 전문기술 인력을 양성하는 데 도움을 주고자 하는 것이다. 이를 위하여 현행 공학교육의 현황과 문제점을 분석하고 강의 현대화 사례를 조사하여 본 연구의 기초자료로 삼고자 하였으며, 학부·전공별 강의 현대화 추진 실태분석 및 개선방안을 모색한 후 이상의 연구결과를 종합하여 향후의 강의 형대화 추진방향을 걸정하였다. This study aims to help bring up the well-skilled and creative engineers by searching the modernization of education using various high technology facilities. For this, we analyzed the general condition and problems of current engineering education and surveyed the case study of the modernization of education as basic study. After analyzing the existing situation of promotion searching the proper improvement methods of it, we proposed the new direction of the modernization of education from now on.