Fallopian Metaplastic Papillary Tumour: An Atypical Transdifferentiation of the Tubal Epithelium?

Miguel Fdo. Salaza,Isaías Estrada Moscoso,Lorena Troncoso Vázquez,Nubia Leticia López García,Paola Andrea Escalante Abril 대한병리학회 2015 Journal of Pathology and Translational Medicine Vol.49 No.2

A metaplastic papillary tumor of the Fallopian tube is an extremely uncommon condition, with odd and confusing features that make it difficult to categorize as benign or borderline. Here, we summarize all the published cases to date and document the case of a 41-year-old woman diagnosed with this alteration after her last childbirth and ensuing tubal ligation. One of the tubes was bulky and filled with a caramel-like substance encircling a blurry spot. Light microscopy detailed a slender stalk covered by eosinophilic, columnar plump cells, showing atypical nuclei and focal budding. Mitotic figures were absent. The immunohistochemistry panel was positive for pan-cytokeratin, epithelial membrane antigen, cyclin D1, and hormone receptors. Additionally, a proliferation index of less than 5% was rated using Ki-67. The true nature of this tumor (reactive vs neoplastic) is uncertain. Nonetheless, its association with pregnancy suggests an adaptive change, likely similar to the atypical transdifferentiation proposed for Arias-Stella reaction.

Bi2InTaO7 compounds as promising photocatalysts for marine plankton removal

Leticia M. Torres-Martínez,Isaías Juárez-Ramírez,Juan S. Ramos-Garza,Francisco Vázquez-Acosta,Ricardo Gómez,ZhengYi Fu,Soo Wohn Lee 한양대학교 세라믹연구소 2011 Journal of Ceramic Processing Research Vol.12 No.1

The removal of marine plankton, red (Amphidium carterae), and green (Tetraselmis suecica) tide algae, by heterogeneous photocatalysis was carried out using pyrochlore-type semiconductors. The semiconductor, Bi2InTaO7 , was prepared by the solgel method and a solid state reaction. The XRD patterns evidence formation of the pyrochlore phase in the sol-gel materials calcined at low temperatures (600-800 oC). Nanostructured sol-gel materials were observed by SEM. The sol-gel preparation allowed the formation of the pyrochlore-type compound with specific surface areas (7-13 m2g−1) higher than the solid obtained by solid state preparation (< 5 m2g−1). Band gap (Eg) values between 2.1-2.7 eV determined by UV-Vis spectroscopy were obtained. Bi2InTaO7 photocatalysts prepared by the sol-gel method were able to eliminate Tetraselmis suecica and Amphidium carterae algae totally after 50 minutes of UV-irradiation, whereas Bi2InTaO7 by solid state preparation needed more than 1 h.

Synthesis of γ-Al₂O₃ nanopowder by the sol-gel method: Effect of different acid precursors on the superficial, morphological and structural properties

Arquímedes Cruz-López,Odilón Vázquez Cuchillo,Isaías Juárez Ramírez,Lilia M. Bautista-Carrillo,Elvira Zarazua-Morin 한양대학교 세라믹연구소 2008 Journal of Ceramic Processing Research Vol.9 No.5

The main aim of this investigation is to study the effect of three acid precursors (nitric acid, acetic acid and citric acid) during the synthesis of γ-Al2O3 nanopowder by the sol-gel method. The TEM analyses showed that the γ-Al2O3 prepared by using the strongest acid were irregular nanofibers with a length of 50 nm and a diameter of 5 nm, while the γ-Al2O3 prepared with citric acid showed agglomerates. On the other hand, the SEM analyses showed very similar morphologies. The N2-physisorption analyses confirmed that there is a relationship between the acidity and the surface area; and between the presence of mesopores and micropores on the surface of the synthesized Al2O3. The effect of the acid strength on the surface area was as follows: nitric acid (347 m2·g−1) > acetic acid (252 m2·g−1) > citric acid (164 m2·g−1). In addition, the XRD results confirmed that for all the samples thermally treated at 600 oC, the main phase was γ-Al2O3; nevertheless, the thermal analyses showed that the γ-Al2O3 synthesized with the weakest acid was not stable above 600 oC. The main aim of this investigation is to study the effect of three acid precursors (nitric acid, acetic acid and citric acid) during the synthesis of γ-Al2O3 nanopowder by the sol-gel method. The TEM analyses showed that the γ-Al2O3 prepared by using the strongest acid were irregular nanofibers with a length of 50 nm and a diameter of 5 nm, while the γ-Al2O3 prepared with citric acid showed agglomerates. On the other hand, the SEM analyses showed very similar morphologies. The N2-physisorption analyses confirmed that there is a relationship between the acidity and the surface area; and between the presence of mesopores and micropores on the surface of the synthesized Al2O3. The effect of the acid strength on the surface area was as follows: nitric acid (347 m2·g−1) > acetic acid (252 m2·g−1) > citric acid (164 m2·g−1). In addition, the XRD results confirmed that for all the samples thermally treated at 600 oC, the main phase was γ-Al2O3; nevertheless, the thermal analyses showed that the γ-Al2O3 synthesized with the weakest acid was not stable above 600 oC.

Protecting the iTrust Information Retrieval Network against Malicious Attacks

Yung-Ting Chuang,P. Michael Melliar-Smith,Louise E. Moser,Isaí Michel Lombera 한국정보과학회 2012 Journal of Computing Science and Engineering Vol.6 No.3

This paper presents novel statistical algorithms for protecting the iTrust information retrieval network against malicious attacks. In iTrust, metadata describing documents, and requests containing keywords, are randomly distributed to multiple participating nodes. The nodes that receive the requests try to match the keywords in the requests with the metadata they hold. If a node finds a match, the matching node returns the URL of the associated information to the requesting node. The requesting node then uses the URL to retrieve the information from the source node. The novel detection algorithm determines empirically the probabilities of the specific number of matches based on the number of responses that the requesting node receives. It also calculates the analytical probabilities of the specific numbers of matches. It compares the observed and the analytical probabilities to estimate the proportion of subverted or non-operational nodes in the iTrust network using a window-based method and the chi-squared statistic. If the detection algorithm determines that some of the nodes in the iTrust network are subverted or non-operational, then the novel defensive adaptation algorithm increases the number of nodes to which the requests are distributed to maintain the same probability of a match when some of the nodes are subverted or non-operational as compared to when all of the nodes are operational. Experimental results substantiate the effectiveness of the detection and defensive adaptation algorithms for protecting the iTrust information retrieval network against malicious attacks.

Detection of Colletotrichum spp. Resistant to Benomyl by Using Molecular Techniques

Dalha Abdulkadir Isa(Dalha Abdulkadir Isa ),Heung Tae Kim(Heung Tae Kim) 한국식물병리학회 2022 Plant Pathology Journal Vol.38 No.6

Colletotrichum species is known as the major causal pathogen of red pepper anthracnose in Korea and various groups of fungicides are registered for the management of the disease. However, the consistent use of fungicides has resulted in the development of resistance in many red pepper-growing areas of Korea. Effective management of the occurrence of fungicide resistance depends on constant monitoring and early detection. Thus, in this study, various methods such as agar dilution method (ADM), gene sequencing, allele-specific polymerase chain reaction (PCR), and polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) were applied for the detection of benzimidazole resistance among 24 isolates of Colletotrichum acutatum s. lat. and Colletotrichum gloeosporioides s. lat. The result of the ADM showed that C. gloeosporioides s. lat. was classified into sensitive and resistant isolates to benomyl while C. acutatum s. lat. was insensitive at ≥1 μg/ml of benomyl. The sequence analysis of the β-tubulin gene showed the presence of a single nucleotide mutation at the 198th amino acid position of five isolates (16CACY14, 16CAYY19, 15HN5, 15KJ1, and 16CAYY7) of C. gloeosporioides s. lat. Allele-specific PCR and PCR-RFLP were used to detect point mutation at 198th amino acid position and this was done within a day unlike ADM which usually takes more than one week and thus saving time and resources that are essential in the fungicide resistance management in the field. Therefore, the molecular techniques established in this study can warrant early detection of benzimidazole fungicide resistance for the adoption of management strategies that can prevent yield losses among farmers.

Cytochrome b Gene-Based Assay for Monitoring the Resistance of Colletotrichum spp. to Pyraclostrobin

Dalha Abdulkadir Isa(Dalha Abdulkadir Isa ),Heung Tae Kim(Heung Tae Kim) 한국식물병리학회 2022 Plant Pathology Journal Vol.38 No.6

Resistance to pyraclostrobin due to a single nucleotide polymorphism at 143rd amino acid position on the cytochrome b gene has been a major source of concern in red pepper field infected by anthracnose in Korea. Therefore, this study investigated the response of 24 isolates of C. acutatum and C. gloeosporioides isolated from anthracnose infected red pepper fruits using agar dilution method and other molecular techniques such as cytochrome b gene sequencing, polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP), and allele-specific polymerase chain reaction (PCR). The result showed that four isolates were resistant to pyraclostrobin on agar dilution method and possessed GCT (alanine) codon at 143rd amino acid position, whereas the sensitive isolates possessed GGT (glycine). Furthermore, this study illustrated the difference in the cytochrome b gene structure of C. acutatum and C. gloeosporioides. The use of cDNA in this study suggested that the primer Cacytb-P2 can amplify the cytochrome b gene of both C. acutatum and C. gloeosporioides despite the presence of various introns in the cytochrome b gene structure of C. gloeosporioides. The use of allele-specific PCR and PCR-RFLP provided clear difference between the resistant and sensitive isolates. The application of molecular technique in the evaluation of the resistance status of anthracnose pathogen in red pepper provided rapid, reliable, and accurate results that can be helpful in the early adoption of fungicide-resistant management strategies for the strobilurins in the field.

오바스테야마(姨捨山) 풍습과 근대의 고령자 차별

伊佐晴妃(Haruhi Isa),伊佐尙子(Shoko Isa) 한국노년학연구회 2018 한국 노년학연구 Vol.27 No.2

일본은 다른 나라들보다 인구 고령화가 더 빠르게 진행되었고, 고령자 인구비율도 가장 높다. 이로 인한 여러 가지 사회적 문제를 경험하고 있는데, 그 중 하나는 바로 심신의 건강을 상실하여 타인의 케어를 필요로 하는 고령자가 매년 증가하고 있다는 것이다. 유감스럽게도 재택케어이든 시설케어이든 케어의 질 저하로 인해 고령자가 차별이나 학대를 받는 일이 자주 발생하고 있다. 본고에서는 고대 일본에서의 노인을 버렸다는 전설적인 이야기 오바스테야마(姨捨山) 의 현상을 상세히 조망했으며, 이를 토대로 근대의 고령자 존중과 차별 문화를 비교했다. The population aging of Japan is to exceed all other countries, with Japan having the highest proportion of older adults. This have brought Japan to a number of social problems, and one of them is to increase elderly patients who need geriatric care year by year. It is unfortunate that many cases of elder abuse or ageism have been reported in Japan due to the low quality of care for elderly patients who were cared at home or at long-term care facilities. While taking a comprehensive view of the Japanese legendary tale of Obasuteyama phenomena that were told to discard older adults in the ancient society, the modern culture of respecting older adults compared with the phenomena of ageism in this paper.

Dynamic response analysis of nanoparticle-nanobeam impact using nonlocal theory and meshless method

Isa Ahmadi,Mohammad Naeim Moradi,Mahdi Davar Panah 국제구조공학회 2024 Structural Engineering and Mechanics, An Int'l Jou Vol.89 No.2

In this study, the impact response of a nanobeam with a moving nanoparticle is investigated. Timoshenko beam theory is used to model the nanobeam behavior and nonlocal elasticity theory is used to consider the effects of small dimensions. The interaction between the nanoparticle and nanobeam has been described using Lennard-Jones potential theory and the equations are discretized by the radial basis meshless method and a mathematical model is presented for the nanobeamnanoparticle system. Validation of the proposed model is achieved by comparing the obtained natural frequencies with reference values, demonstrating good agreement. Dimensionless frequency analysis reveals a decrease with increasing nonlocal parameter, pointing out a toughening effect in nanobeam. The dynamic response of the nanobeam and nanoparticle is obtained by time integration of equations of motion using Newmark and Wilson- methods. A comparative analysis of the two methods is conducted to determine the most suitable approach for this study. As a distinctive aspect in this study, the analysis incorporates the deformation of the nanobeam resulting from the nanoparticle-nanobeam interaction when calculating the Lennard-Jones force in the nanobeam-nanoparticle system. The numerical findings explore the impact of various factors, including the nonlocal parameter, initial velocity, nanoparticle mass, and boundary conditions.

Butterfly Cartilage Tympanoplasty Long-term Results: Excellent Treatment Method in Small and Medium Sized Perforations

Isa Kaya,Murat Benzer,Mustafa Uslu,Cem Bilgen,Tayfun Kirazli 대한이비인후과학회 2018 Clinical and Experimental Otorhinolaryngology Vol.11 No.1

Objectives. The aim of this study was to evaluate and report the long-term results of the butterfly cartilage tympanoplasty. Short-term and long-term hearing outcomes were compared according to age and perforation location as well. Methods. Ninety-three patients who were diagnosed with noncomplicated chronic otitis media and underwent microscopic transcanal butterfly cartilage tympanoplasty due to anterior, posterior, and central tympanic membrane perforation were included. Age, gender, follow-up time, pre- and postoperative pure tone audiometry thresholds (both air and bone conduction), pre- and postoperative air-bone gaps (ABGs), if any residual perforation was noted. Results. At the end of the follow-up period, successful closure occurred in 88 of 93 patients and success rate is 94.6%. In all patients, including those with residual perforations, the mean preoperative bone conduction threshold was 15.9 dB (range, 5 to 50 dB) among all groups whereas mean air conduction threshold was 36.4±15.1 dB (range, 10 to 90 dB) preoperatively and 28.8±14.3 dB in 6th month follow-up and 24.9±14.1 dB 24th month follow-up. Preoperative mean ABG was 22.1±7.1 dB (range, 5 to 40 dB) whereas 13.3±5.9 dB 6 months after surgery and 11.9±5.5 dB 24 months after surgery. There was a significant difference between pre- and postoperative ABG in both 6th and 24th month follow-up (P6 mo–24 mo<0.05). Furthermore, preoperative mean air conduction differed significantly from postoperative 6th and 24th month follow-up mean air conduction thresholds (P<0.05). Conclusion. We suggested that butterfly cartilage tympanoplasty can be safely performed in small, moderate, and even large perforations, as the hearing outcomes and successful closure rate are similar to those of other surgical methods. Moreover, it can be performed under local anaesthesia and it has low complication rates.

Micromechanical failure analysis of composite materials subjected to biaxial and off-axis loading

Isa Ahmadi 국제구조공학회 2017 Structural Engineering and Mechanics, An Int'l Jou Vol.62 No.1

In this study, the failure behavior of composite material in the biaxial and off-axis loading is studied based on a computational micromechanical model. The model is developed so that the combination of mechanical and thermal loading conditions can be considered in the analysis. The modified generalized plane strain assumption of the theory of elasticity is used for formulation of the micromechanical modeling of the problem. A truly meshless method is employed to solve the governing equation and predict the distribution of micro-stresses in the selected RVE of composite. The fiber matrix interface is assumed to be perfect until the interface failure occurs. The biaxial and off-axis loading of the SiC/Ti and Kevlar/Epoxy composite is studied. The failure envelopes of SiC/Ti and Kevlar/Epoxy composite in off-axis loading, biaxial transverse-transverse and axialtransverse loading are predicted based on the micromechanical approach. Various failure criteria are considered for fiber, matrix and fiber-matrix interface. Comparison of results with the available results in the litreture shows excellent agreement with experimental studies.