http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
조용준,양희철,은희철,유재형,김준형 한국화학공학회 2003 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.41 No.5
용융염산화는 혼성폐기물과 유해폐기물을 효과적으로 산화 및 분해할 수 있는 소각대체기술중 하나이다. 본 연구에서는 직경이 0.079 m이고 높이가 0.653 m인 용융염산화 반응기에서 기체체류량 및 기-액 흐름특성에 대한 연구를 수행하였다. 액상으로 용융탄산나트륨을 기상으로 건조된 공기를 사용하였으며 기체유속(0.05-0.22 m/s)과 용융염온도(870-970℃) 변화가 기체체류량 및 기-액 흐름특성에 미치는 영향을 규명하였다. 기체체류량은 용융염 온도가 상승함에 따라 증가하였는데, 이는 용융염 온도의 증가로 인해 용융된 탄산나트륨의 점도와 표면장력이 감소하였기 때문이다. 실험에서 얻어진 기체체류량 데이터를 drift-flux 모델에 적용하여 용융염반응기 내의 흐름특성을 규명할 수 있었으며, 이를 통해 흐름영역에 따른 기체체류량을 정확하게 예측할 수 있었다. Molten salt oxidation is one of the most promising alternatives to incineration that can be used to efficiently destroy the organic components of mixed wastes and hazardous wastes. In this study, the gas holdup and gas-liquid flow characteristics are investigated in the molten salt oxidation reactor (0.076 m D×0.653 m H.). Effects of input air velocity (0.05-0.22m/s ) and molten salt temperature (870-970℃) on the gas holdup and flow characteristics have been studied. Molten carbonate as the liquid phase and air as the gas phase have been used in this study. The gas holdup increases with increasing molten salt temperature due to the decrease of viscosity and surface tension of molten carbonate. The experimentally obtained gas holdups in the molten salt reactor have been well described and characterized by means of drift-flux model. The gas holdups with variation of the flow regime have been well predicted.
중앙아시아 벽화 보존처리(1) : 벽화(본4074, 본4096)의 상태조사
강형태,이용희,유혜선,김연미,조연태,시고 아오키,노리코 야마모토,켄타로 오바야시 국립중앙박물관 2001 박물관보존과학 Vol.3 No.-
국립중앙박물관은 용산 새 박물관의 전시 유물로 선정된 중앙아시아 벽화의 연차적인 보존처리를 위해 “독립행정법인 일본 도쿄문화재연구소’’와 공동연구를 모색하게 되었다. 2001년에 본4074, 본4096 작은 벽화편 2점의 보존처리를 시작하면서 벽화의 균열 박락 등 손상상태, 구조와 구성재료, 이전 보존처리에서 적용된 재료와 방법에 대한 기초조사를 실시하였다. 조사결과 본4074, 본4096 2점의 벽화는 흙과 지푸라기를 반죽하여 만든 벽체에 석고를 발라 바탕으로 하고 그 위에 채색을 한 것으로 나타났으며 벽체 속에 포함된 지푸라기의 방사선 탄소연대측정 결과 본 벽화는 10세기 말에서 13세기 초에 만들어진 것으로 나타났다. 또한 X-선회절 분석 결과 화면의 흰색 바탕은 gypsum[Ca(SO₄)·2H₂O]과 CaSO₄, Calcite(CaCO₃)가 적색계통은 연단(鉛丹:Pb₃O₄)과 led arsenate[Pb(As₂O₆)], 녹색계통은 Cuprite(Cu₂O)와 arsenolite(As₂O₃), arsenic oxide(As₂O₄) 등이 사용된 것으로 조사되었다. This article is about a joint project carried out by the National Museum of Korea and the Tokyo Cultural Properties Research Institute for the conservation of central Asia Wall painting that has been selected for the exhibition at the new Seoul National Museum of Korea at Yongsan. The investigation of the wall painting revealed very useful information. This includes the condition of the object, and the identification of evident damage, such as cracks, loss of pigment, plus materials and methods employed during the object's creation, as well as previous conservation treatment. The object was mainly made by applying plaster to the body (wall) that consisted of a mixture of soils and rice straws. Then, on the surface of the wall-painting, pigments were used to draw and to colour it. As a part of the investigation, radiocarbon dating was conducted using straw samples taken from the object. The result indicates that the object is probably dated form between the end of the 10th Century and the beginning of the 13th Century. The result of X-ray diffraction also revealed the composition of the pigments used on the surface. These are 1. gypsom[Ca(SO₄)·2H₂O], CaSO₄ and Calcite(CaCO₃) and Calcite(CaCO₃) that were used for the white background. 2. Pb₃O₄ and led Arsenate [Pb(As₂O₆) that were used for the red colouring. 3. Cuprite(Cu₂O), Arsenolite(As₂O₃) and Arsenic Oxide(As₂O₄) that were used for the green colouring.
蛋白質 水準 및 供給源이 泌乳初期搾乳牛의 産乳量에 미치는 影響
辛炯泰,韓泳根,金秉泰,裵熙東,孫重天 成均館大學校 科學技術硏究所 1984 論文集 Vol.35 No.2
Eighteen Holstein cows capable of producing at least 23㎏ of milk per day were assigned randomly in equal numbers and fed one of three isocaloric total rations of 15.8 (soybean meal), 15.8 (urea), or 14.1% (urea) crude protein in dry basis. All cows were fed their assigned ration continuously for 63 days beginning on the 20 day postpartum. This experiment was designed to determine the influence of concentration and source of dietary protein on milk production(kg) and milk fat(%) during early lactation. The results which were obtained in this experiment as follows: 1. Milk yields (4.0% fat corrected milk, FCM) of cows for 42 day trial in early lactation were 23.80, 20.32, 18.44kg for the respective treatment. In this experiment the higher protein concentration (15.8% vs 14.1%) increased milk production, and source of protein influenced milk production. 2. Milk fat of 3.63, 3.52, and 3.39% showed that dietary protein concentration and source influenced milk fat in early lactating cows. 3. Income above feed cost for 42 day trial was greatest for the group fed the 15.8% crude protein from soybean meal (5,406 won/cow/day) and lowest for the group fed the 14.1% crude protein from urea (3,919.5 won/cow/day). income above feed cost for 15.8% crude protein from urea was 4,154.4 won /cow/day.
수종 치과재료의 제I급 와동에서의 변연 누출에 관한 실험적 연구
이선희,손흥규,최형준 大韓小兒齒科學會 1996 大韓小兒齒科學會誌 Vol.23 No.1
Microleakage is a problem of all filling materials of losted teeth structure and is clinically undetectable. Because marginal leakage may be responsible for pulp irritation, pulp inflammation, necrosis and recurrent caries, it is essential to prevent and control it. For the evaluations of microleakage of various class I filling materials, 175 extracted teeth were filled with amalgam, light curing composite resin, glass inomer cement, IRM and Fermit-N. After thermocycling, speciemens were placed in 1% methylene blue dye solution for 24 hours in an incubator set 37℃. The teeth were sectioned at filling body center and margin and degree of dye penetration was observed with a stereomicroscope. The following results were obtained. 1. Light cured composite resin has the excellent results and microleakage is increased in the order of amalgam, IRM, Fermit-N, glass ionomer cement.(SAS-6.0 system) and there was a statistically significancy in marginal leakage for each filling materials.(Kruskal-Wallis analysis, P<0.05) 2. Microleakage of the center and margin was statistically insignificant (Mann-Whitney analysis P<0.05) 3. There was less microleakage for amalgam than light cured composite resin but was statistically insignificant (Mann-Whitney analysis, P<0.05) and also showed less marginal leakage for Fermit-N compared to glass ionomer cement but also was statistically insignificant. (Mann-Whitney analysis, P<0.05).
가변전송율 MPEG비디오에서 셀 손실이 화질에 미치는 영향과 그 보상기법에 관한 연구
김장형,최연성,고희준,김대영 濟州大學校 産業技術硏究所 1995 산업기술연구소논문집 Vol.6 No.-
The output from the video codec, such as MPEG or H.261, consist of macroblocks into ATM cells, when depend on whether or not part of an uncompleted macroblock may be carried over to the next cell. These are the loose and close packing. In this paper, two methods are compare and their efficiency is analysis and we analysed priority control mechanism to achieve the cell loss rate the cell loss rate requirement and the delay requirement of each service class in ATM switch with output buffer. The service classes of our concern are the high time priority class and the high loss priority class
Prednisolone 에 의한 장티푸스 抗菌治療의 지연
鄭喜泳,鄭圭源,金在亨,徐廷和,宋貞燮 대한감염학회 1976 감염 Vol.8 No.1
For the purpose of shortening of febrile period of typhoid fever, prednisolone was administered with bacteriocidal antibiotics though corticosteroid had not been used routinely for its possible side effects on typhoid fever. The authors suspected beneficial effects of corticosteroid because the action of bacteriocidal antibiotics was different from the action of bacteriostatic effects of chloramphenicol which was used in the last 30 years. The result was quite different from expectation and the febrile period of the patients was prolonged in all of the cases as shown in figures. Corticosteroid must not be used in typhoid fever so far as it is possible because delay of antibiotic effect than other known side effect. The possible mechanism of the longer intracellular parasitism of Salmonella typhi due to corticosteroid for the prolongation of fever was discussed.
이장형,박희석 大邱大學校 社會科學硏究所 2000 社會科學硏究 Vol.8 No.1
정보화 시대를 살아가면서 더 많은 조직들이 업무에 있어서 정보의 중요성을 인식하고, 대부분의 조직들은 정보시스템을 주된 기능으로 대체하는데 기초를 둔 컴퓨터 환경으로 변화시킬 계획들을 가지고 있다. 하지만 많은 조직들은 정보시스템의 효율성과 신뢰성을 조사할 필요가 있고 심지어 불평까지 하는 경우도 있다. 오늘날 정보시스템 감리에 대한 수요는 정보시스템의 성공적인 개발을 지원하기 위해 증대하고 있다. 감리의 목표는 정보시스템의 부작용을 막고, 예산의 효율적인 사용을 확신하며 조직의 내부 감리 능력과 인식을 제공하는 것이다. 이런 목표를 성취하고 감리 품질을 높이기 위하여 정보시스템 감리를 제도화하고 감리모형을 개발할 필요가 있다. 이 연구에서는 우선 감리, 모형, 사례등을 기술한다. 그리고 감리를 수행하기 위한 모형과 방법을 소개한다. 이 모형들은 시스템 개발자와 감리인에게 사용되어질 것이다. 감리의 증대되는 수요에 따라 새로운 모형의 개발은 필요하고 현장에서 응용도구와 다양한 기술 표준 및 모형이 고려되었다. 따라서 정보시스템 감리 모형에 관한 연구를 수행하였다. 정보시스템 감리의 모형 개발을 위한 하위 메뉴로는 정보시스템 계획을 위한 감리모형, 정보 시스템 관리를 위한 감리모형, 정보시스템 유지를 위한 감리모형, 정보시스템에서 품질관리를 위한 감리모형, 보안 및 통제를 위한 감리모형이다. 모형은 3가지 모형인데 모형1은 동등비중의 감리모형, 모형2는 점검표 항목수에 따른 감리모형이고 모형3은 이 둘의 혼합 감리모형이다. 개선되는 모형으로는 모형3을 제안한다.