서정주 문학의 현재적 의미와 논의의 새로운 출발점

남기혁(Nam, Ki-Hyeog) 한국시학회 2015 한국시학연구 Vol.- No.44

본고는『미당 서정주 전집』(은행나무, 2015) 간행의 의미를 검토하였다. 이번 전집 간행은 전 20권 분량으로 기획되어 미당이 생전에 남긴 모든 시집과 산문집을 아우르는 것으로 기획되어 있다. 미당 생전에 15권으로 간행된 시집 전체를 묶어낸 다섯 권의 전집 간행이 현재까지 진행된 상황이다. 미당 전집 간행은 미당 문학을 집대성하는 것이란 점에서 일반 독자는 물론 연구자들에게 각별한 의미를 던져 준다. 본고는 이번 전집의 간행 원칙을 비판적으로 검토하고, 향후 진행될 전집 간행의 완성도를 높일 수 있는 실천적 제안을 제시하였다. 먼저 본고는 전집 간행에 적용된 몇 가지 편집상 원칙을 검토하고, 기존 단행본들의 집대성 과정에서 빚어진 일부 텍스트의 누락 문제, 특히 시집에 수록되지 않은 작품들의 수록 문제와 친일시의 처리 문제 등을 비판적으로 검토하였다. 이와 함께 미당 시와 산문에 내재하는 상호텍스트성 문제가 부각될 수 있도록 향후 전집 간행에서 유연한 간행 및 편집의 원칙들을 세워줄 것을 제안하였다. 이와 함께 본고는 향후 일반 독자와 연구자들이 친일 문제를 포함하여 미당의 정치적, 문학적 편력을 어떻게 접근해야 하는가에 대해 논의하였다. 시와 시인(삶)의 분리라는 순수문학적 논리가 사실의 은폐로 귀결될 위험성을 제기하면서, 그의 문학적·정치적 편력을 가감 없이 기록하되 그것을 타자화하고 일방적으로 매도하는 태도에서 벗어나 그것이 지닌 정신사적 의미를 되돌아보고 근대성 비판 혹은 반근대적 사유의 실험에 비판적인 참고로 삼자는 것이다. This essay aims to review the meaning of publishing Midang Seo, Jeong-Ju"s Complete Works(『미당 서정주 전집』). This publication is planned for collecting all the works by Midang including poems and prose in twenty volumes. Now, this publication is in progress to edit five volumes that collect all Midang"s poetry. So this publication gives the special meaning not only to reading public but also to reachers. At first, this essay examined critically some editorial principles, and made some suggestion how to upgrade the integrity of this complete works. And this essay criticized the omission of Midang"s early works that was not collected in his seventeen anthologies, especially his pro-Japanese poetry. In addition, this essay demanded the flexible editing principle to reveal the intertextuality between Midang"s poetry and prose which contains his own self-narratives. Finally, this essay discussed the matter how we can gain proper viewpoint to approach Midang"s literary and political apostasy including his pro-Japanese action. When we argue and evaluate a poetic accomplishment, the logic of pure literature that separate poet"s life and poetry has the tendency of hiding the literary historical fact. So this essay suggested that this publication should record all his literary and political apostasy. In this way, this publication will give all the reading public and reachers chances to retrospect the Midang-Discourse in terms of Korean intellectual history, and chances to reevaluate Midang"s poetics of eternity in terms of ostmodern thinking.

지속성 외래복막투석 환자들의 예후에 영향을 미치는 요인들에 관한 고찰

권혁만,김찬덕,조지형,장민화,최혁준,이현철,박자용,박선희,김용림 대한신장학회 2004 대한신장학회잡지 Vol.23 No.2

人體의 水中 適應에 관한 調査 硏究

權赫東 釜山水産大學校 1983 論文集 Vol.31 No.-

To research the adaptability of human body under water, this test was done from June, 5 to June, 6, 1983. When the data from the test were arranged and analyzed, the results were as follow: 1. For recovering body temperature when model group was tested, it took 15 minutes in a 10-minute test, 15 minutes in a 20-minute test, 25 minutes in a 30-minute test, and 40 minutes in a 40-minute test, 2. In pulse recovery of model group It took 25 minutes in a 10-minute test, 25 minutes in a 20-minute test, 40 minutes in a 30-minute test, and 55 minutes in a 40-minute test, 3. When comparison group was tested for recovering body temperature, It took 10 minutes in a 10-minute test, 10 minutes in a 20-minute test, 25 minutes in a 30-minute test, and 55 minutes in a 40-minute test, 4. Inpulse recovery of comparison group it took 20 minutes in a 10-minute test, 20 minutes in a 20-minute test, 25 minutes in a 30-minute test, and 30 minutes in a 40-minute test, 5. Before test and in normal condition, body temperature of Comparison group was 0.29C lower than that of model group. 6. In pulse, comparison group was 10.8 frequency less than that of model group.

Telemetry System 신호 전송 원리를 응용한 회전형 Wireless Torque Transducer의 개발

權赫準 서라벌대학 1995 논문집 Vol.9 No.-

Telemetry means measurement system that a object is measured at a good distance. Sometimes, it is necessary that signal, torque or temperature, which is produced in rotary or romote body. But, in traditional measurement, it is possible that the flexibility and reliability of measurement system is lost and is impossible that wire for measurement is connected. In this paper, basic theory for data communication which is used in telemetry system is introduced. Stationary and rotary wireless torque transducer in which infrared sensors is used is developed.

성능 인자의 평가를 통한 망관리 방법

권혁인,임재현 중앙대학교 기술과학연구소 1995 기술과학연구소 논문집 Vol.25 No.-

여러 가지 망들의 성능을 표시하는 변수들의 의미에 대해서는 이미 정확한 정의가 국제 표준에 정의되어 있다. 그러나 상호연결된 이종망을 위한 성능인자의 정의가 미흡한 상황이다. 즉 영역별로 정의된 인자들의 상관관계가 명확하지 않다. 본 논문에서는 양단간 성능인자의 측정에 근거하여 상호연결된 망의 관리를 수행하는 방법을 제시한다. International standards already provide precise definitions for the indicators semantics concerning the different networks. However, these definitions are not completed yet to support interconnected heterogeneous networks. Several networks have not been completely defined (e.g. Ethernet, ATM). Moreover, there is no correlation between the performance indicators defined fro each domain. This paper presents an approach for the management of interconnected networks performance, based on the assessment of global end-to-end transport indicators.

高周波電源을 利用한 大型 Plasma 發生裝置 設計에 關한 硏究

權赫崇 대구보건대학 1994 대구보건대학 論文集 Vol.14 No.-

In desiging the practical plasma application chamber for the treatment of textile material of commercial size, extra consideration is required on the structure and plasma power source of the chamber beacuse any mismatch between the system tends to generate high-reactive voltage which likely leads to the breakdown of the complete power system. In this paper, the author analysis the electrical characteristics of low temperature plasma introduced by abnormal glow discharge and derives a practical method of minimizing the effect of reactive component. In order to prevent destructive effect of reactance, the choosing of the lowest usable frequency is required. The author calculated that the power frequency of 24㎑ is the lowest frequency that can be used without impairing discharging efficiency. By choosing the frequency around 300㎑, together with a cage-shaped circular electrode with a feedback oscillator amplifier, the author successfully removed surge effect with the efficiency of better than 0.98. A complete electric system, including the electrode assembly and a 50 ㎾ high frequency power source, has been desigend and manufactured based on the analysis, which are assembled into a practical large size plasma treatment system. A serise of measurments made on the electrical system fairly matched with the results of theoretical analysis. The plasma treating facility composed of the main chamber(17.5㎥ capacity), the vacuum system, the cooling system and the electrical system has successfully treated the PET material with a speed of 4/m/min.

정칙화 반복 영상복원 처리에 관한 연구

권혁숭,홍성용 대구보건대학 1994 대구보건대학 論文集 Vol.14 No.-

This paper introduces a regularized iterative image restoration algorithm. Generally, linear space-invariant image restoration algorithm often introduces artifacts near sharp intensity transition region. It is shown that these artifacts are attributable to the regularization of the ill-posed image restoration problem. So in this paper, two methods to reduce these artifacts in restored image are proposed. The first methods incorporates deterministic a prior information.

SM45C 鋼의 切削時 CHIP BREAKER의 性能 評價

權赫準 서라벌대학 1992 논문집 Vol.6 No.-

In this paper, the performance of chip breaker was investigated by experimental approach. To classify the chip type, the performance evaluation function which can be determined by cutting condition(feed, depth of cut, chip curl radius) was suggested. According to this study, the - main results are as follows. 1. The groove-type chip breaker acts effecttively by controlling the radius of the chip and breaking into short length when the feed is above 0.2㎜/rev. 2. The performance of chip breaker becomes better when the chip section ratio was smaller and in the area of the cutting speed in which the built-up edge was not occured. 3. For parallel type chip breaker, it fulfilled its performance better as a chip breaker when the width of groove was smaller.

제주지역 양돈농가의 경영성과 분석

권혁인,강태숙 濟州大學校 農科大學 動物科學硏究所 1997 動物科學論叢 Vol.12 No.1

이종 재질의 메탈베어링 성형해석과 설계

전재억,김수광,계증읍,권혁준,정진서,하만경 한국공작기계학회 2003 한국공작기계학회 추계학술대회논문집 Vol.2003 No.-

When designing an engine part the designer has to choose the proper material and to define the dimensions of the part. in the most Rudimentary case he has available as guidelines the collective experience from similar applications. The performance of the part is tested on occasion of the trial runs for the full system, and possibly occurring deficiencies are corrected until a satisfactory usable life and safety of operation is achieved. This procedure is time consuming and costly, and the learning effect is minimal. These requirements have to be condensed into characteristic values ameanable to computation. Since testing and computation are complementary we have to look at the currently existing mathematical models for engine bearing performance.