http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Hanger로 보강된 스터드 접합부의 인장거동에 관한 실험적 연구
박휘규,김승훈,이리형,이용택,황홍순,이정희 대한건축학회 2003 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.23 No.1(구조계)
This paper presents the tensile behavior of the stud connection between reinforced concrete(RC) and steel members. Hanger reinforcements are placed around the studs to transfer the tensile loads to the opposite side of the concrete member. Six specimens, of which variables were arrangement details of hanger reinforcements and studs. Tensile test results show that hanger reinforcements are effective to increase tensile strength and ductility. Test tensile strengths of specimens are compared with the nominal strengths by ACI codes(ACI 318-02, ACI 349-99) and PCI 1999.
구개열에서 비인두강의 생리해부학적 구조와 과비음과의 연관성 연구
조준희,표화영,최홍식,최병재,손흥규,심현섭 大韓小兒齒科學會 2004 大韓小兒齒科學會誌 Vol.31 No.4
비인강폐쇄란 연구개, 인두측벽 그리고 인두후벽간의 움직임이 서로 조화되어 구강과 비강을 나누어주는 괄약근 기전으로서 연하, 호흡, 발음 등의 생리적기능에 중요한 역할을 한다. 이 기능에 문제가 생긴 경우를 비인강폐쇄부전이라하며 그 원인으로는 (1) 연구개의 길이 및 움직임이상 (2) 비인두강의 해부학적 공간문제 (3) 인두 후벽과 측벽의 기능이상 등이 있다. 본 연구는 구개열 환자의 측면두부방사선계측사진을 통해 비인두강을 생리해부학적으로 분석하였으며 산출된 말소리의 과비음정도를 Nasometer로 평가하였다. 이로부터 얻은 정상군과 구개열환자군의 결과를 각각 비교하였으며, 비인강폐쇄부전과의 연관성을 알아보기 위하여 Anatomic VPI와 Nasalance score의 값을 비교분석하였다. 얻어진 결과는 다음과 같았다. 1. 측면두부방사선계측사진 결과, 연구개 길이, 연구개 두께, 비인강 깊이, 비인강 면적, Adequate ratio에서 두 그룹간 유의한 차이를 나타내었다. 2. Nasometer 결과. 모음/오/와 구강공명음문장, 구강장해음문장에서 두 그룹 간 유의한 차이를 나타내었다. 3. 구개열환자군에서 비인두강의 폐쇄부전 정도를 표현해주는 Anatomic VPI와 Nasalance score는 전반적으로 연관성이 없었다. 다만, 모음/이/와 일부 구강자음으로 이루어진 문장에서 다소의 상관성을 나타내었다. 결론적으로, 측면두부방사선계측사진과 Nasometer 각각의 검사결과에서 두 그룹간 유의한 차이를 찾아볼 수 있었으나, 구개열환자군내에서 비인강폐쇄부전을 표현하는 Anatomic VPI와 Nasalance score는 모음/이/와 구강자음을 포함한 문장을 제외하고는 전반적으로 연관성이 없었다. Velopharyngeal closure is a sphincter mechanism between the activities of the soft palate, lateral pharyngeal wall and the posterior pharyngeal wall, which divides the oral and nasal cavity. It participates in physiological activities such as swallowing, breathing and speech. It is called a velopharyngeal dysfunction when this mechanism malfunctions. The causes of this dysfunction are defects in (1) length, function, posture of the soft palate, (2) depth and width of the nasopharynx and (3) activity of the posterior and lateral pharyngeal wall. The purposes of this study are to analyze the nasopharynx of cleft palate patients using cephalometry and to evaluate the degree of hypernasality using nasometry to find its relationship with velopharyngeal dysfunction. The following results were obtained : 1. In cephalometry, there were significant differences in soft palate length, soft palate thickness, nasopharyngeal depth, nasopharyngeal area, and adequate ratio between two groups. 2. In nasometry, there were significant differences between two groups in vowel /o/ and sentences including oral consonants. 3. In cleft palate patients, though no general correlation was found between Anatomic VPI and nasalance scores, vowel /i/ and sentences including oral consonants were slightly correlated. In conclusion, cephalometry and nasometer results were significantly different between the two groups. Though in the cleft palate group. Anatomic VPI and nasalance scores, which are indices for velopharyngeal closure, excluding the vowel /i/ and sentences including oral consonants show generally no significance.
이종현,신장규,이상룡,천희곤,조찬섭,심준환,류인식,박석홍,허정준,박기열 경북대학교 센서기술연구소 1994 연차보고서 Vol.1994 No.-
자동차의 air-bag 장치에 실용될 수 있는 압저항형 단결정 실리콘 가속도센서 칩을 개발하기 위하여 결정 실리콘 미세구조의 제조방법을 확립하고, 단위공정의 검증을 통하여 일괄공정에 의한 PROTO-TYPE 칩을 만드는 기술을 연구하였다. 단결정 실리콘 미세구조는 선택확산법을 이용하여 정확히 선택된 영역에만 air-gap을 형성하여 미세구조의 측면식각을 방지하는 선택확산법에 의한 실리콘 마이크로머시닝 기술로 제조하였다. 일괄공정을 위한 단위공정확립을 위하여 PROTY-TYPE 8빔 브릿지형 가속도 센서를 제조하였다. 제조된 칩의 가속도에 따른 출력전압은 선형성을 나타내고 있으며, 감도는 약 50 ㎶/V·g로 나타났다. 이 감도는 50G용 가속도센서의 사양을 만족하지 못했다. 이는 공정에 의한 문제라기 보다는 가속도센서의 시뮬레이션에 의해 설계한 구조가 이미 원하는 감도에 못 미친다는 것으로 생각된다. 따라서 2차 공정으로 제조될 가속도센서의 파라미터를 SuperSAP 유한요소 패키지를 이용하여 실리콘 미세구조부의 파라미터에 따른 특성을 시뮬레이션하였다. 설계된 50G용 가속도센서의 mass Pad의 반경 및 빔 길이, 빔 폭, 빔 두께, 그리고 mass의 각 파라미터 값은 700 ㎛, 120 ㎛, 5 ㎛, 1.0 ㎎ 이었다. 반도체 공정기술, 관성질량 제조법 및 선택확산을 이용한 마이크로머시닝을 사용하여 일괄공정으로 8빔 브린지형 가속도센서를 제조하였다. We researched the establishment of the silicon microstructure fabrication technique to develop a piezoresistive type silicon acceleration sensor chip and the technique to make a proto-type chip by the verification of the unit-process. Silicon microstructure is fabricated silicon micro-machining by selective diffusion method. This method prevent a side-etching of microstructure because selective diffused region is only formed an air-gap. We fabricated a proto-type 8-beam bridge-type acceleration sensor to establish the unit-process for the batch-process. The output voltage of the chip represented linearity with acceleration, and the sensitivity was about 50 ㎶/V·g. But this sensitivity dosen't satisfy the requirements of a practical acceleration sensor. The cause of this result is assumed not process problem, but the structure designed by simulation isn't suitable already. Threfore, the characteristics of parameters of the acceleration sensor that will be fabricated by 2nd-process is simulated by SuperSAP finite-element package. The determined parameter values of beam length, beam width, beam thickness, mass, and mass radius are 120 ㎛, 5 ㎛, 1.0 ㎎, and 700 ㎛, respectively. We fabricated 8-beam bridge-type acceleration sensor by batch-process using a semiconductor process technique, proof-mass fabrication method, and micromachinig using selective diffusion.
[PB-0071] GBS 분석을 통한 국내 무(Raphanus sativus L.) 품종의 유전적 유연관계 분석
Hui Yeon Hong(Hui Yeon Hong),Jun Ho Lee(Jun Ho Lee),Yoon Ah Jang(Yoon Ah Jang),Jin Hee Kim(Jin Hee Kim),Ji Won Kim(Ji Won Kim),Ji Hyeon Lim(Ji Hyeon Lim),Hye Won Yu(Hye Won Yu),Won Byoung Chae(Won Byo 한국육종학회 2022 한국육종학회 공동학술발표집 Vol.2022 No.-
[PB-0073] 무(Raphanus sativus L.) 품종의 표현형적 특성과 heterozygosity 간의 상관관계 분석
Hui Yeon Hong(Hui Yeon Hong),Jun Ho Lee(Jun Ho Lee),Yoon Ah Jang(Yoon Ah Jang),Jin Hee Kim(Jin Hee Kim),Ji Won Kim(Ji Won Kim),Ji Hyeon Lim(Ji Hyeon Lim),Hye Won Yu(Hye Won Yu),Won Byoung Chae(Won Byo 한국육종학회 2022 한국육종학회 공동학술발표집 Vol.2022 No.-
Hui, K.S.,Hui, K.N.,Yin, C.L.,Hong, X. North-Holland 2013 Materials letters Vol.97 No.-
Spinel cobalt oxide (Co<SUB>3</SUB>O<SUB>4</SUB>) nanowires grown on Ni foam are successfully synthesized using a novel microwave-assisted template-free method. The effect of reaction temperature, concentration of reactants, and reaction time on the morphology and crystalline structures of the prepared nanowires is studied. The present work has demonstrated that uniform Co<SUB>3</SUB>O<SUB>4</SUB> nanowires with diameters of 500-580nm and lengths of 6-8μm can be synthesized under proper reaction condition. Moreover, the proposed microwave-assisted template-free method can significantly reduce reaction time, increase reaction efficiency, and provide better control over the geometry of the nanostructures.