http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
아시아티코사이드로부터 메칠 2β, 3β-에폭시-23-히드록시우르스-12-엔-28-오애이트의 합성 및 이의 환원적 에폭시환 개열반응
주상섭,임두연,서성기,남태규,박형근,김희두,김창민,이민희,백형근,이민정,정영훈 성균관대학교 약학연구소 1998 成均藥硏論文集 Vol.10 No.1
Steroidal 2β, 3β-epoxy compound was prepared from asiaticoside via six steps and reduced regioselectively with lithium aluminum hydride. Epoxide ring opening furnished 9 as a sole product at reflux condition through axial hydride attack at C-3.
토당귀 종자의 형태적 특성과 발아와 입모율에 대한 저장방법,생장조절제 및 프라이밍 처리 효과
안희정,안복주,·김도현,·안영섭,·김영국,박춘근,이상원,·박충범·차선우,·송범헌, 忠北大學校 農業科學硏究所 2015 農業科學硏究 Vol.31 No.1
This study was conducted to have basic and applied informations to establish the cultivation method and to improve the cultivation techniques of Angelica gigas Nakai through investigating the rates of germination and seedling establishment with treatment of plant growth regulator and seed priming. The germination rates of round shape seed were about 0.3~12% higher than those of parallel shape. The germination rates with different storage durations were increased at the level of 25oC and 4oC with the storage days, while they were clearly higher at -20oC compared to those at 4oC and 25oC without the storage durations. With the results of germination rates with treating of plant growth regulator and seed priming, their rates with the round shape seeds were comparatively higher about 6% than those with parallel shape seed and they were increased with increasing of the storage durations. The germination rates were generally appeared higher with GA3 than did those with seed priming. The highest germination rate was appeared at 50 ppm GA3 of plant growth regulator and at -0.5 MPa PEG6000 of seed priming. The germination rates?ㅤ ?ㅤ of Angelica gigas were different with different temperature, storage durations and the treatments of plant growth regulator and seed priming. These results could be used according to different cultivating conditions.
난분해성 폐수처리를 위해 Bioaugmentation한 생물막 반응기에 관한 연구
이건,김희,조순자,박근태,차미선,이상준 부산대학교 환경문제연구소 2002 環境硏究報 Vol.20 No.-
The effect on the stability of biofilm and phenol removal efficiency under high phenol loading was investigated by RBC(Rotating Biological Contactor) using augmented reactor and unaugmented reactor with Rhodococcus sp. EL-GT. The operation of RBCs was carried out at rotating speed of 10 rpm and hydraulic retention time of 7 h at 20℃. The maximum amount of dry weight of the biofilm was 0.04 g/㎠ to running time for 15 days. The amount of attached biofilm of contactors was stabilized as 0.15∼0.03 g/㎠ for 35 days' running times and that of two reactors was similar value. But unaugmented reactor was shocked at 1,200 mg/ℓ phenol loading that the biofilm and removal efficiency were impacted. The bioaugmentation reactor showed higher removal rates than unaugmented reactors about phenol, sCOD and nitrogen contents. Bioaugmentation, with the strain originating from the same ecosystem and growing effectively on a selective substrate, was often effective means to treatment of recalcitrants like as phenol wastewater.
Monascus anka로부터 유기배양에 의한 적색소의 대량생산
김희구,박근태,손홍주 한국식품영양학회 1998 韓國食品營養學會誌 Vol.11 No.6
Monascus anka KFCC 4478의 적색소 생산력을 증가시키기 위하여 발효조 배양조건을 검토한 후, 탄소원을 연속적 또는 간헐적으로 공급하는 유기배양을 하였다. 5l 용량의 발효조를 이용하여 배양시 교반속도 200rpm, 통기량 1vvm 및 종균 접종량 10%(v/v)일 때 색소 생성량이 최대였다. 또한 벽면에 부착된 균사체를 재접종함으로써 색소 생성력이 향상되었다. Intermittent feeding fed-batch culture에 의하여 배양 9일만에 30g/l의 건조균체와 350(A_495)의 색소가 생성되었으며, continuous feeding fed-batch culture에 의하여 22g/l의 건조균체와 190(A_495)의 색소가 얻어졌다. 따라서 본 균주에 의하여 적색소를 생산코자 할 경우는 회분배양보다 유기배양이 더 우수한 것으로 나타났다. The production of red pigment from glucose by fed-batch culture of Monascus anka was investigated. In batch culture using fermentor, 200 rpm of agitation speed, 1vvm of aeration volume, and 10%(v/v) of inoculum size were optimal, respectively. The red pigment production was increased by removal of wall-attached mycelium. In an intermittent feeding fed-batch culture, dry cell weight increased to 30g/l, and the red pigment content reached 350 of absorbance at 495nm. In a continuous feeding fed-batch culture, dry cell weight increased to 22g/l, and the red pigment content reached 190 of absorbance at 495nm.
김희구,박근태,손홍주 한국식품영양학회 1998 韓國食品營養學會誌 Vol.11 No.6
Monascus anka KFCC 4478의 적색소 생산력을 증가시키기 위하여 배지조성 및 배양조건에 대하여 검토하였다. 공시균주의 색소 생성력은 탄소원으로 glucose 4.0%, 유기질소원으로 peptone 3.0%, 무기질소원으로 NaNO_3 0.15%, 비타민 성분으로 thiamine-HCI 및 nicotinic acid 각 10㎍/l였으며, 배양온도 30℃, 초기 pH 7.0이었다. 특히 유기질소원과 무기질소원을 복합 처리함으로서 색소 생성력이 향상되었다. 결정된 색소생성 최적조건하에서 본 공시균주는 배양 5일만에 최대 균체 증식과 색소 생성력을 나타내었다. Optimal media and cultural conditions for the production of red pigment were established using Monascus anka KFCC 4478. The optimal temperature and initial pH for the production of red pigment were 30℃ and 7.0, respectively. Glucose turned out to be most suitable carbon source for red pigment production. Optimal glucose concentration was 3.0%. Addition combined of nitrogen sources of peptone and NaNO_3 induced good red pigment production. Thiamine-HCL and nicotinic acid were increased the production of red pigment. Under optimal conditions, maximum red pigment production and cell growth were observed after 5 days of incubation.
이민희,정성민,황근배,최용규 경성대학교 공학기술연구소 2003 공학기술연구지 Vol.S1 No.1
Among soft ground treatment methods with granular soil used in domestic, the sand compaction pile method has been utilized greatly, but, as a result of exhaustion of sand and increase of unit cost, a necessity of an alternative method is suggested. In this study, the static load tests for crushed-stone compaction piles which were constructed on test field were performed. Based on test results, stress concentration ratios between the crushed-stone compaction pile and the soft ground were investigated and estimated. At laoding pressure, settlement showed the decreasing tendency as replacement rate increases. At replacement rate of 20%, yield pressure was smaller but, at replacement rate of 30% and 40%, settlement and yield pressure were similar. The stress concentration ratio was the range of 1.7 to 3.0 and it was higher as replacement rate was increased more.
오리엔탈나리의 球根 收穫時期와 低溫處理 期間이 生育에 미치는 影響
金熙峻,金正萬,金致善,柳汀,崔泳根,文炳永 한국화훼연구회 2001 화훼연구 Vol.9 No.1
This study was carried out to determine the effect of the duration of chilling treatment and the lifting time of bulbs on growth of Lilium Oriental hybrids for product of cut flower in the type of forcing or semiforcing culture in Korea. "Casablanca", "Acapulco" and "Le Reve" in lilium Oriental hybrids were used in these experiment and carried out from 1999 to 2000 in Iksan, Korea. The bulbs for experiment were lifted on August 27, September 27 and October 27 and the all of them were chilled at 5±1℃ for 0,8,10,12 weeks. Development of the bulbs lifted on October 27 was superior than that of lifted bulbs on August 27 in the three cultivars. The bulbs lilted lately and chilled for a long time were sprouted more earlier and grown faster. In order to increase bulb sprouting until 100%, the duration of chilling treatment of bulbs was need for 12 weeks on August 27, 10 weeks on September 27 and above 8 weeks on October 27. The flowering according to the duration of chilling treatment and the lifting time of bulbs was same above. Consequently, the bulbs should be chilled at 5±1℃ for chilled for 10 weeks at late September and 8 weeks in producted bulbs at late October in earlyㆍMidseason variety fur product of cut flower hut bulbs of late variety should be chilled for 12 weeks at late September and 10 weeks at late October.
VS전동기를 대체하기 위한 저가형 VVVF 인버터의 개발
전희종,조성민,윤재식,손진근 崇實大學校 1999 論文集 Vol.29 No.1
VS(Variable Speed)-Motor is speed control method using eddy-current coupling. This method installs eddy-current coupling with constant speed driving Induction Motor and controls rotating speed through a charging change of a excitation current, particularly. VS-Motor is used widely because of simple control and wide speed range. But this method has large losses and low efficiency because of heating as slip drum in low speed region. In cooling, addition of a mechanical devices is difficult and in volume, large space is occupied. Using SCR for control, efficiency of system is low. In case of inverter, though advantage of high efficiency and high performance the price is expensive. Therefore, in this study, we developed low-cost type VVVF(Variable Voltage Variable Frequency) Inverter system for substituting VS-Motor.