Comparative Efficacy and Safety of Radiofrequency Ablation and Microwave Ablation in the Treatment of Benign Thyroid Nodules: A Systematic Review and Meta-Analysis

Zufry Hendra,Hariyanto Timotius Ivan 대한영상의학회 2024 Korean Journal of Radiology Vol.25 No.3

Objective: The current body of evidence lacks clarity regarding the comparative efficacy and safety of radiofrequency ablation (RFA) and microwave ablation (MWA) as minimally invasive treatments for benign thyroid nodules. The primary objective of this study is to clarify these concerns. Materials and Methods: A comprehensive search was conducted using the Cochrane Library, Scopus, Europe PMC, and Medline databases until October 10th, 2023, using a combination of relevant keywords. This study incorporated literature that compared RFA and MWA for benign thyroid nodules. The primary outcome was the volume reduction ratio (VRR) from baseline to follow-up. Secondary outcomes were symptom score, cosmetic score, ablation time, major complications rate, hemorrhage, hoarseness, skin burn, cough, and sympathetic nerve injury. We used Risk of Bias in Non-randomized Studies - of Interventions (ROBINS-I) tool to assess the risk of bias in the included studies. We employed random effects models to analyze the standardized mean difference (SMD) and odds ratio for the presentation of outcomes. Results: Nine studies with 2707 nodules were included. The results of our meta-analysis indicated similar efficacy between RFA and MWA in terms of VRR during the 1 (SMD 0.06; 95% confidence interval [CI]: -0.13 to 0.26; P = 0.52) and 3 (SMD 0.11; 95% CI: -0.03 to 0.25; P = 0.12) months of follow-up. VRR was significantly higher in RFA than in MWA at the 6 (SMD 0.25; 95% CI: 0.06–0.43; P = 0.008) and 12 month of follow-up (SMD 0.38; 95% CI: 0.17 to 0.59; P < 0.001). There were no significant differences between RFA and MWA in symptom scores, cosmetic scores, or the incidence of complications, including hemorrhage, hoarseness, skin burn, cough, and sympathetic nerve injury. Conclusion: RFA showed a higher VRR than MWA at 6 and 12-month follow-ups, with a comparable safety profile.

Investigation on the Three-Dimensional Nanostructure and the Optical Properties of Hydroxyapatite/Magnetite Nanocomposites Prepared from Natural Resource

Ahmad Taufiq,Yuanita Amalia Hariyanto,Sunaryono,Siriwat Soontaranon 한국물리학회 2019 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.75 No.9

Hydroxyapatite, which has been widely used in the medical eld in the last couple of years, is a superior biomaterial due to its biocompatibility and nontoxicity. Hydroxyapatite requires highly magnetic materials to perform maximally in specic medical elds. In this study, hydroxyap- atite/magnetite composites mainly composed of limestone and natural iron sand were synthesized through a coprecipitation method, and composites having different hydroxyapatite-to-magnetite mass ratios were compared. The crystal structure, particle size, fractal dimension, morphology, functional group, and energy gap were characterized using X-ray diffraction (XRD), synchrotron X-ray scattering (SAXS), scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy, and ultraviolent-visible (UV-Vis) spectroscopy. The research results showed that the hydroxyapatite and magnetite phases had a hexagonal structure and cubic structure, respectively. In general, from the FTIR data analysis, the hydroxyapatite and magnetite particles were iden- tied from the functional groups of phosphate, iron-oxygen, carbonate, and hydroxyl. Moreover, depending on particle size, the samples consisting of 3.7-nm primary particles formed a cluster with a massive three-dimensional structure. Meanwhile, the energy gap showed various values ranging between 3.25 and 3.86 eV.

Formulating a Conceptual Model of Digital Service Transformation Based on a Systematic Literature Review

Sawung Murdha Anggara,Agus Hariyanto,Novianto Budi Kurniawan,Arry Akhmad Arman,Suhardi 한국과학기술정보연구원 2023 Journal of Information Science Theory and Practice Vol.11 No.1

Digital service transformation study is a part of research in the field of digital transformation, which is devoted to exploring the transformations that occur in digital service products, which have been intensely explored in recent years to address digital disruption. Several concepts and definitions of digital service transformation have emerged as a result of an approach from the point of view of digital transformation and digital services concepts. This paper is organized to provide a foundational understanding of digital service transformation terminology. This paper uses the systematic literature review method to compile 52 qualified articles from previous studies. We conduct an analysis and synthesis of articles to answer research questions. The results of this study are a descriptive summary of research in the digital service transformation field, determining digital service transformation terminology and components, and also a proposed digital service transformation model to explain the position of transformation in digital service products in the overall transformation process. We construct this model using the findings of previously determined components synthesis.

Relationship between Phenotype Models Based on Waist Circumference and Triglyceride Levels and the Risk of Chronic Kidney Disease: A Systematic Review and Meta-analysis

Karunia Valeriani Japar,Timotius Ivan Hariyanto,Mochammad Sja’bani Mardjopranoto 대한비만학회 2023 Journal of obesity & metabolic syndrome Vol.32 No.3

Background: Chronic kidney disease (CKD) is a leading cause of death worldwide and has a high cost of treatment. Studies have indicated that a combination of waist circumference (WC) and triglyceride (TG) levels can be used to determine the risk of CKD. This study analyzes the risk of CKD using four phenotype models based on WC and TG. Methods: This meta-analysis analyzes 113,019 participants from 13 studies. We conducted relevant literature searches in the Europe PMC, Medline, and Scopus databases using specific keywords. The results obtained were pooled into odds ratios (ORs) with 95% confidence intervals (CIs) using random-effects models. Results: Our pooled analysis revealed that the highest significant independent association was between CKD and the high WC-high TG phenotype (adjusted OR, 1.61; 95% CI, 1.39 to 1.88; P<0.00001; I2=59%), followed by the high WC-normal TG phenotype (adjusted OR, 1.33; 95% CI, 1.12 to 1.57; P=0.001; I2=67%), and the normal WC-high TG phenotype (adjusted OR, 1.20; 95% CI, 1.06 to 1.37; P=0.005; I2=29%) when the normal WC-normal TG phenotype was taken as the reference. Conclusion: Our study suggests that phenotype models based on WC and TG can be used as screening tools to predict the risk of CKD. Our results also indicate that WC plays a larger role than TG in the CKD risk. Further prospective studies are needed to confirm the results of our study.

On-line Error-matching Measurement and Compensation Method for a Precision Machining Production Line

Shih-Ming Wang,Chun-Yi Lee,Hariyanto Gunawan,Chin-Cheng Yeh 한국정밀공학회 2022 International Journal of Precision Engineering and Vol.9 No.2

When producing a matching part for good mating with its counterpart (assembly part), good matching accuracy between the matching part and assembly part is highly required. The matching errors are influenced by not only the errors of the matching part but also the errors of the assembly part. Because the errors of an assembly part could be different from others, it is very difficult to have very good mating accuracy, if the manufacturing of a matching part does not take the actual errors of the assembly into account. Furthermore, it will need additional off -line assembly mating tests to find a good mating pair. This study proposes an error-matching compensation method to solve the not-good-mating problem for manufacturing assembly modules with good matching accuracy. In this method, the actual errors of an assembly part are directly in-line measured and used to compensate the machining process of a matching part so that a dedicated part with the good mating condition can be on-line made for the error-measured assembly part. In addition to having better matching accuracy, this method also provides advantages of high production efficiency and cost saving, because it will not need the off -line mating test to find good mating pairs. This method also includes a function of in-line auto-generation of error compensation NC programs to support continuous production. In this study, error analysis of two mating types (planar mating and triangle mating) were explored and discussed. The Human–Machine Interface was built with the use of C# language. Finally, machining experiments with in-line measurements were conducted to verify the proposed method. The experimental results have shown the feasibility and effectiveness of the proposed method.

Enhancement of a roller brake tester for modelling the tire

Ery Muthoriq,Zainal Abidin,Arief Hariyanto,Mulyadi Bur 대한기계학회 2023 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.37 No.7

A tire model can be used to predict vehicle dynamics behaviour, such as braking or turning. This paper proposes a method for testing/modelling a tire with a roller brake tester. It requires two speed sensors installed on the roller and idler. That additional sensors are used to estimate roller brake tester inertia and measure tire slip during testing. After involving inertia in the calculation, the brake tester measurement becomes accurate in all points from zero until maximum slip. These results are better than the existing roller brake tester which is only accurate when the steady state condition of the roller is achieved. The modified brake tester and tire testing were modelled and simulated using MATLAB® Simulink. Furthermore, the influence of the brake tester arrangement on measurement characteristics has been identified.

Numerical simulation of advection-diffusion on flow in waste stabilization ponds (1-dimension) with finite difference method forward time central space scheme

Gitta Agnes Putri,Sunarsih,Susilo Hariyanto 대한환경공학회 2018 Environmental Engineering Research Vol.23 No.4

This paper presents the numerical simulation of advection-diffusion mechanism of BOD concentration which was used as an indicator of waste only in one flow-direction of waste stabilization ponds (1-dimension (1-D)). This model was represented in partial differential equation order 2. The purpose of this paper was to determine the simulation of the model 1-D of wastewater transport phenomena based advection-diffusion mechanism and did validate the model. Numerical methods which was used for the solution of this model is finite difference method with Forward Time Central Space scheme. The simulation results which was obtained would be compared with field observation data as a validation model. Collection of field data was carried out in the Wastewater Treatment Plant Sewon, Bantul, D.I. Yogyakarta. The results of numerical simulations were indicate that the advection-diffusion mechanism takes place continuously over time. Then validation of the model was state that there was a difference between the calculation results with the field data, with a correlation value of 0.998.