High expression of keratin 6C is associated with poor prognosis and accelerates cancer proliferation and migration by modulating epithelial–mesenchymal transition in lung adenocarcinoma

Hai‑Bo Hu,Xiao‑Ping Yang,Pei‑Xia Zhou,Xin‑Ai Yang,Bin Yin 한국유전학회 2020 Genes & Genomics Vol.42 No.2

Background Lung adenocarcinoma (LUAD) is a more frequent subtype of lung cancer and most cases are discovered in the late stages. The proliferation and metastasis of LUAD are pivotal for disease progression. Despite unremitting deeper understanding of LUAD biology, the mechanisms involved in the proliferation and metastasis of LUAD remain unclear. The objective of our article was to inquiry the expression and the function of keratin 6C (KRT6C) in LUAD cells. Methods First, the expression level and prognostic value of KRT6C in LUAD tissues were analyzed on the basis of the data acquired from TCGA database. Through qRT-PCR, the expression level of KRT6C on LUAD cell lines (A549, H1299, PC-9) and human normal lung cell line MRC-5 was tested. After that, CCK8 and colony formation assays was utilized to detect cell proliferation. In addition, to explore the influence of KRT6C on LUAD migration and invasion ability, scratch wound healing and transwell assays were utilized. Through western blotting, the protein expression levels of KRT6C, PCNA, E-cadherin, N-cadherin, Snail and Vimentin were detected. Results The outcomes revealed that KRT6C was highly expressed in LUAD tissues and cell lines. Besides, elevated level of KRT6C was related to worse prognosis in LUAD patients. Ablation of KRT6C restrained proliferation, migration and invasion of A549 cells. KRT6C deficiency augmented the expression of E-cadherin as well as reduced the expression of N-cadherin, Snail and Vimentin. Conclusion Above all, these consequences indicated that depletion of KRT6C suppressed A549 cell proliferation, migration and invasion, which might be achieved by regulating EMT. In general, KRT6C is identified as a potential therapeutic target for LUAD.

Practical Calculation Method for the Short‑Circuit Current of Power Grids with High Temperature Superconducting Fault Current Limiters

Hai‑feng Hong,Meng‑ze Yu,Xiao‑hui Zhang,Jia‑jia Huan,Yu Sui,Xian‑xian Pan 대한전기학회 2020 Journal of Electrical Engineering & Technology Vol.15 No.2

With the expansion of the power grid scale and the enhancement of network structure interconnection, the short-circuit current of power grids is increasingly close to the upper capacity limit of circuit breakers. The fault current limiter is efective in suppressing the short-circuit current of power grids, and with the mature development of superconducting technology, high-temperature superconducting fault current limiters (HTS-FCLs) have been widely used in power grids. Due to the nonlinear impedance–current characteristic of HTS-FCLs, the traditional short-circuit current calculation method is inapplicable to power grids with HTS-FCLs. First, based on the establishment of the electromechanical transient model and the short-circuit calculation model, the short-circuit current calculation procedure for power grids with HTS-FCLs is proposed. Second, the calculation methods for three-phase and single-phase short-circuit currents at the substation bus in power grids with HTS-FCLs are analyzed. Finally, three-phase and single-phase short-circuit currents at the 500 kV Xijiang substation bus in the Guangdong power grid are calculated as the study case. Simulation results show that compared with the situation where there is no HTS-FCL installed, the short-circuit current on the 500 kV bus decreases from 65.34 to 58.31 kA in terms of the three-phase short-circuit fault, and decreases from 54.56 to 46.62 kA in terms of the single-phase short-circuit fault, thus verifying the efectiveness and practicability of HTS-FCLs in suppressing the short-circuit current, which is signifcant for the safe, stable and reliable operation of the power grid.

Meteorological driven factors of population growth in brown planthopper, Nilaparvata lugens Stål (Hemiptera: Delphacidae), in rice paddies

Xiao‐Zhen Li,Yi ZOU,Hai-Yan YANG,Hai-Jun XIAO,Jian-Guo WANG 한국곤충학회 2017 Entomological Research Vol.47 No.5

Growth of brown planthopper (BPH) (Nilaparvata lugens Stål) in rice paddies is mainly driven by meteorological factors under similar management practices. By analyzing field investigation and meteorological data collected from 2008 to 2013 in Nanchang, China, we show that BPH population densities and monthly growth rates (BGR) changed greatly from May to October, and these changes were closely associated with meteorological factors. Stepwise regression and path analysis indicated average speed of winds (AW) in June and lowest temperature (LT) in July were the first factors entering analysis, which interpreted 46.20% and 31.90% of their influences on BGR. While highest temperature (HT) in August and average temperature (AT) in September were the most important factors affecting BGR, but their direct path coefficients were all smaller than their corresponding indirect path coefficients. In October, relative humidity (RH), AW and number of raining days (RD) had significant effects on BGR. According to the sum of each meteorological factor entering stepwise regression analysis sequences, we found AW had the utmost effect on BPH growth, followed by AT and RH, but LT and RD least. The work demonstrate dynamic meteorological factors driving BPH growth and outbreak in rice paddies, which would facilitate the development of durable approaches for forecasting and controlling this destructive rice pest.

Discriminating Eggs from Two Local Breeds Based on Fatty Acid Profile and Flavor Characteristics Combined with Classification Algorithms

Xiao-Guang Dong,Li-Bing Gao,Hai-Jun Zhang,Jing Wang,Kai Qiu,Guang-Hai Qi,Shu-Geng Wu 한국축산식품학회 2021 한국축산식품학회지 Vol.41 No.6

This study discriminated fatty acid profile and flavor characteristics of Beijing You Chicken (BYC) as a precious local breed and Dwarf Beijing You Chicken (DBYC) eggs. Fatty acid profile and flavor characteristics were analyzed to identify differences between BYC and DBYC eggs. Four classification algorithms were used to build classification models. Arachidic acid, oleic acid (OA), eicosatrienoic acid, docosapentaenoic acid (DPA), hexadecenoic acid, monounsaturated fatty acids (MUFA), polyunsaturated fatty acids (PUFA), unsaturated fatty acids (UFA) and 35 volatile compounds had significant differences in fatty acids and volatile compounds by gas chromatographymass spectrometry (GC-MS) (p<0.05). For fatty acid data, k-nearest neighbor (KNN) and support vector machine (SVM) got 91.7% classification accuracy. SPME-GC-MS data failed in classification models. For electronic nose data, classification accuracy of KNN, linear discriminant analysis (LDA), SVM and decision tree was all 100%. The overall results indicated that BYC and DBYC eggs could be discriminated based on electronic nose with suitable classification algorithms. This research compared the differentiation of the fatty acid profile and volatile compounds of various egg yolks. The results could be applied to evaluate egg nutrition and distinguish avian eggs.

Water and carbohydrate levels at different developmental stages and dynamics in hibernating pupae of Pieris melete (Lepidoptera: Pieridae)

Hai-Jun XIAO,JunHui CHEN,Chao CHEN,Fang-Sen XUE 한국곤충학회 2015 Entomological Research Vol.45 No.5

For insight into the physiological indicators of diapause in Pieris melete, water and carbohydrate (glycogen and trehalose) levels were measured under both natural and laboratory conditions. The highest water content (3.71–3.79 mg/mg dry weight) was found in larvae and developing pupae, which was substantially higher than in diapausing pupae (2.59 mg/mg dry weight). Water content was almost stable during diapause, except for individuals approaching diapause termination (3.43–3.58 mg/mg dry weight). The total carbohydrate level was significantly higher in pre‐pupae (47.41 μg/mg) compared to larvae (22.80 μg/mg) and developing pupae (21.48 μg/mg). The highest level of trehalose was detected in winter diapausing pupae, and no trehalose was found in larvae or developing pupae. Levels of glycogen were highest in pre‐pupae and lowest in diapausing pupae. Levels of total carbohydrate decreased as diapause proceeded, and no significant changes were found in trehalose levels for diapausing pupae under natural conditions or treated for 60–90 days at 5°C. Pupae treated at 20°C for 60–90 days had significantly lower levels of trehalose than those treated for 30 days. Glycogen content was relatively stable at 5°C, but increased after treatment under natural conditions and 20°C for more than 60 days. These results suggest that the dynamics of water and carbohydrate levels are potential physiological diapause indicators, which show metabolic differences between trehalose and glycogen during diapause development.

Synthesis and Structure Analysis of α and β Forms of [12] Metallacrown-6 Nickel(II) Complex: [Ni₆(SCH₂CH₂CH₃)₁₂]

Xiao, Hai Lian,Jian, Fang Fang,Zhang, Ke Jie Korean Chemical Society 2009 Bulletin of the Korean Chemical Society Vol.30 No.4

Two modifications of the ${\alpha}\;and\;{\beta}$ forms of propyl mercaptan nickel(II) cluster, [$Ni_6(SCH_2CH_2CH_3)_{12}$], have been synthesized and their crystal structures have been determined by single-crystal X-ray diffraction. The alkyl groups are away from $Ni_6$ ring in $\alpha$ form whereas they are near to the Ni atom in $\beta$ form. The distance of Ni-H in $\beta$ form [2.576(5) $\AA$] is much shorter than that in $\alpha$ form [3.101(2) $\AA$]. In the crystal lattice of $\beta$ form, the whole structure forms a flower shape.

Stereo-digital image correlation in the behavior investigation of CFRP-steel composite members

Xiao-Yuan He,Yun-Tong Dai,Hai-Tao Wang,Tian-Yuan Ge,Gang Wu,Jian-Xiao Wan,Shuang-Yin Cao,Fu-Jun Yang 국제구조공학회 2017 Steel and Composite Structures, An International J Vol.23 No.6

The application of carbon fiber reinforced polymer (CFRP) in steel structures primarily includes two categories, i.e., the bond-critical application and the contact-critical application. Debonding failure and buckling failure are the main failure modes for these two applications. Conventional electrometric techniques may not provide precise results because of the limitations associated with single-point contact measurements. A nondestructive full-field measurement technique is a valuable alternative to conventional methods. In this study, the digital image correlation (DIC) technique was adopted to investigate the bond behavior and buckling behavior of CFRP-steel composite members. The CFRP-to-steel bonded joint and the CFRPstrengthened square hollow section (SHS) steel column were tested to verify the suitability of the DIC technique. The stereo- DIC technique was utilized to measure continuous deformation. The bond-slip relationship of the CFRP-to-steel interface was derived using the DIC data. Additionally, a multi-camera DIC system consisting of four stereo-DIC subsystems was proposed and applied to the compressive test of CFRP-strengthened SHS steel column. The precise buckling location and CFRP delamination of the CFRP-strengthened SHS steel column were identified. The experimental results confirm that the stereo-DIC technique can provide effective measurements for investigating the behaviors of CFRP-steel composite members.

STC2 is upregulated in hepatocellular carcinoma and promotes cell proliferation and migration in vitro

( Hai Xiao Wang ),( Kuang Jie Wu ),( Yuan Sun ),( Yan Dong Li ),( Ming Yu Wu ),( Qian Qiao ),( Yuan Jiang Wei ),( Ze Guang Han ),( Bing Cai ) 생화학분자생물학회(구 한국생화학분자생물학회) 2012 BMB Reports Vol.45 No.11

The human glycoprotein, stanniocalcin 2 (STC2) plays multiple roles in several tumor types, however, its function and clinical significance in hepatocellular carcinoma (HCC) remain unclear. In this study, we detected STC2 expression by quantitative real-time PCR and found STC2 was upregulated in HCC tissues, correla ed with tumor size and multiplicity of HCC. Ectopic expression of STC2 markedly promoted HCC cell proliferation and colony formation, while silencing of endogenous STC2 resulted in a reduced cell growth by cell cycle delay in G0/G1 phase. Western blot analysis demonstrated that STC2 could regulate the expression of cyclin D1 and activate extracellular signal-regulated kinase 1/2 (ERK1/2) in a dominant-positive manner. Transwell chamber assay also indicated altered patterns of STC2 expression had an important effect on cell migration. Our findings suggest that STC2 functions as a potential oncoprotein in the development and progression of HCC as well as a promising molecular target for HCC therapy.

Synthesis and Structure Analysis of α and β Forms of [12] Metallacrown-6 Nickel(II) Complex: [Ni6(SCH2CH2CH3)12]

Hai Lian Xiao,Fang Fang Jian,Ke Jie Zhang 대한화학회 2009 Bulletin of the Korean Chemical Society Vol.30 No.4

Two modifications of the α and β forms of propyl mercaptan nickel(II) cluster, [Ni6(SCH2CH2CH3)12], have been synthesized and their crystal structures have been determined by single-crystal X-ray diffraction. The alkyl groups are away from Ni6 ring in α form whereas they are near to the Ni atom in β form. The distance of Ni-H in β form [2.576(5) Å] is much shorter than that in α form [3.101(2) Å]. In the crystal lattice of β form, the whole structure forms a flower shape.

VAULT PROTEIN-TEMPLATED ASSEMBLIES OF NANOPARTICLES

XIAO-YING QI,XIAO HUANG,HAI LI,YUSONG WANG,Yun Xia,MEENUBHARATHI NATARAJAN,JUN WEI,Subbu S. Venkatraman,HUA ZHANG 성균관대학교(자연과학캠퍼스) 성균나노과학기술원 2012 NANO Vol.7 No.1

Recombinant vault nanoparticles are used as stable nanoscale platforms for controlled self-assembly of various kinds of nanoparticles into the predefined multidimensional architectures. High-yield and uniform discoidal assemblies templated by vaults are constructed from gold nanospheres and quantum dots, while dimeric assemblies are formed from relatively-large gold nanocubes. The vault-templated approach appears to be mainly mediated by the surface and dimensional properties of nanoparticles while less affected by the chemical composition of nanoparticles, making it a universal strategy for fabrication of nanoassemblies with designed properties for potential applications.