http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : Guo-Xiong (검색결과 107 건)
- 무료
- 기관 내 무료
- 유료
-
Analysis of restrained steel beams subjected to heating and cooling Part I: Theory
Guo-Qiang Li,Shi-Xiong Guo 국제구조공학회 2008 Steel and Composite Structures, An International J Vol.8 No.1
Observations from experiments and real fire indicate that restrained steel beams have better fireresistant capability than isolated beams. Due to the effects of restraints, a steel beam in fire condition can undergo very large deflections and the run away damage may be avoided. In addition, axial forces will be induced with temperature increasing and play an important role on the behaviour of the restrained beam. The factors influencing the behavior of a restrained beam subjected to fire include the stiffness of axial and rotational restraints, the load type on the beam and the distribution of temperature in the cross-section of the beam, etc. In this paper, a simplified model is proposed to analyze the performance of restrained steel beams in fire condition. Based on an assumption of the deflection curve of the beam, the axial force, together with the strain and stress distributions in the beam, can be determined. By integrating the stress, the combined moment and force in the cross-section of the beam can be obtained. Then, through substituting the moment and axial force into the equilibrium equation, the behavior of the restrained beam in fire condition can be worked out. Furthermore, for the safety evaluation and repair after a fire, the behaviour of restrained beams during cooling should be understood. For a restrained beam experiencing very high temperatures, the strength of the steel will recover when temperature decreases, but the contraction force, which is produced by thermal contraction, will aggravate the tensile stresses in the beam. In this paper, the behaviour of the restrained beam in cooling phase is analyzed, and the effect of the contraction force is discussed.
-
Analysis of restrained heated steel beams during cooling phase
Guo-Qiang Li,Shi-Xiong Guo 국제구조공학회 2009 Steel and Composite Structures, An International J Vol.9 No.3
Observations from experiments and real fire indicate that restrained steel beams have better fireresistant capability than isolated beams. Due to the effects of restraints, a steel beam in fire condition can undergo very large deflections and the run away damage may be avoided. However disgusting damages may occur in the beam-to-column connections, which is considered to be mainly caused by the enormous axial tensile forces in steel beams resulted from temperature decreasing after fire dies out. Over the past ten years, the behaviour of restrained steel beams subjected to fire during heating has been experimentally and theoretically investigated in detail, and some simplified analytical approaches have been proposed. While the performance of restrained steel beams during cooling has not been so deeply studied. For the safety evaluation and repair of steel structures against fire, more detailed investigation on the behaviour of restrained steel beams subjected to fire during cooling is necessary. When the temperature decreases, the elastic modulus and yield strength of steel recover, and the contraction force in restrained steel beams will be produced. In this paper, an incremental method is proposed for analyzing the behaviour of restrained steel beams subjected to cooling. In each temperature decrement, the development of deformation and internal forces of a restrained beam is divided into four steps, in order to consider the effect of the recovery of the elastic modulus and strength of steel and the contraction force generated by temperature decrease in the beam respectively. At last, the proposed approach is validated by FE method.
-
Xiong, Wei,Jiang, Yong-Xin,Ai, Yi-Qin,Liu, Shan,Wu, Xing-Rao,Cui, Jian-Guo,Qin, Ji-Yong,Liu, Yan,Xia, Yao-Xiong,Ju, Yun-He,He, Wen-Jie,Wang, Yong,Li, Yun-Fen,Hou, Yu,Wang, Li,Li, Wen-Hui Asian Pacific Journal of Cancer Prevention 2015 Asian Pacific journal of cancer prevention Vol.16 No.8
Background: Preoperative 5-fluorouracil (5-FU)-based chemoradiotherapy is a standard treatment for locally advanced colorectal cancer (CRC). However, CRC cells often develop chemoradiation resistance (CRR). Recent studies have shown that long non-coding RNA (lncRNA) plays critical roles in a myriad of biological processes and human diseases, as well as chemotherapy resistance. Since the roles of lncRNAs in 5-FU-based CRR in human CRC cells remain unknown, they were investigated in this study. Materials and Methods: A 5-FU-based concurrent CRR cell model was established using human CRC cell line HCT116. Microarray expression profiling of lncRNAs and mRNAs was undertaken in parental HCT116 and 5-FU-based CRR cell lines. Results: In total, 2,662 differentially expressed lncRNAs and 2,398 mRNAs were identified in 5-FU-based CRR HCT116 cells when compared with those in parental HCT116. Moreover, 6 lncRNAs and 6 mRNAs found to be differentially expressed were validated by quantitative real time PCR (qRT-PCR). Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analysis for the differentially expressed mRNAs indicated involvement of many, such as Jak-STAT, PI3K-Akt and NF-kappa B signaling pathways. To better understand the molecular basis of 5-FU-based CRR in CRC cells, correlated expression networks were constructed based on 8 intergenic lncRNAs and their nearby coding genes. Conclusions: Changes in lncRNA expression are involved in 5-FU-based CRR in CRC cells. These findings may provide novel insight for the prognosis and prediction of response to therapy in CRC patients.
-
One-dimensional consolidation with asymmetrical exponential drainage boundary
Mei, Guo-Xiong,Lok, Thomas M.H.,Xia, Jun,Wu, Sheng Shen Techno-Press 2014 Geomechanics & engineering Vol.6 No.1
In this paper, asymmetric drainage boundaries modeled by exponential functions which can simulate intermediate drainage from pervious to impervious boundary is proposed for the one-dimensional consolidation problem, and the solution for the new boundary conditions was derived. The new boundary conditions satisfy the initial and the steady state conditions, and the solution for the new boundary conditions can be degraded to the conventional solution by Terzaghi. Convergence study on the infinite series solution showed that only one term in the series is needed to meet the precision requirement for larger degree of consolidation, and that more terms in the series for smaller degree of consolidation. Comparisons between the present solution with those by Terzaghi and Gray are also provided.
-
Wenhui Guo,Shuhu Guo,Xu Zhao,Zhenjun Yuan,Yu Zhao,Xin Chang,Hong Li,Xiong Zhao,Ye Wan,Dazhou Yan,Zhongyuan Ren,Xiaolei Fan,Xin Gao 한국공업화학회 2022 Journal of Industrial and Engineering Chemistry Vol.109 No.-
Ultra-high-purity (UHP) electronic-grade octamethylcyclotetrasiloxane (D4) is the key precursor of lowdielectricconstant (low-k) SiCOH films to manufacture integrated circuits (IC), meeting the stringentrequirements of the rapidly developing semiconductor industry. Commonly, metallic impurities in D4were removed by multiple unit operations of adsorption, filtration, and distillation, which could reducethe concentration of a single metallic impurity below 1 ppb. However, D4 with higher purity is requiredby semiconductor production due to an increase in transistor density. Herein, a novel method based onthe integrated simultaneous distillation–extraction (SDE) was developed for manufacturing UHPelectronic-grade D4. The lab and pilot scale experiments showed that the purity of water and D4 has apositive correlation. Based on the experimental data, a double-column process, consisting of azeotropic/extractive distillation column and precision distillation column with UNIQUAC method, was establishedto access the feasibility of scaling up the SDE process. According to the simulation results, D4with the purity > 99.999 wt.% and total metallic impurities (TMI) content below 1 ppb could be obtainedusing ultra-pure water.
-
-
Shi-Xiong Guo,Guo-Qiang Li 국제구조공학회 2008 Steel and Composite Structures, An International J Vol.8 No.1
This paper presents the results of a validation and parametric study for the theory presented in the companion paper. The parameters investigated include the stiffness of axial and rotational restraints, load ratio, depth-span ratio of the beam, the yield strength of steel, load type and the temperature distribution in the crosssection of the beam.
-
Xiong Zhiyong,Wen Zhuoqi,Cui Zhongjie,Mei Shiliang,He Haiyang,Duan Zhongtao,Zhang Wanlu,Xie Fengxian,Guo Ruiqian 한국물리학회 2023 Current Applied Physics Vol.45 No.-
Hysteresis effects in self-luminous devices like organic light-emitting diodes (OLEDs) and perovskite light-emitting diodes (PeLEDs) have been discovered recently, besides emerging in thin film transistors (TFTs). However, the influences of lateral leakage caused by next-door devices on hysteresis effects in flexible OLEDs array have rarely been demonstrated. To mitigate the impact of lateral leakage and figure out the detailed relationship with hysteresis effects, a series of experiments for OLEDs array involving p-doping in holes transport layer (HTL) were employed. It is found that the lateral leakage and hysteresis effects have a trade-off exhibition, which means stronger lateral leakage has induced weaker hysteresis effects. In order to get rid of the role of lateral leakage, the experiments with mono blue devices were also performed to substantiate the intrinsic hysteresis effects existence. The research opens the possibility of considering more internal relationships between different performances on self-luminous arrays for their actual application.
-
Xiong Wei,Xiaobin Liu,Bing Guo,Shen Yan,Wenli Zhang 보안공학연구지원센터 2016 International Journal of Smart Home Vol.10 No.3
As embedded devices prevail in daily life, high energy consumption caused by embedded software caught academic attentions. Multifarious testing and predicting methods are developed accordingly. This paper proposes a model about energy consumption of embedded device based on analysis of embedded software structure and support vector machine regression. The nonlinear relationship between energy consumption and software structure is revealed. The research finds software structure is determined by features like number of components, complexity of component interface, component coupling, and path length. These features are qualified and modeled by using support vector machine regression and energy consumption is predicted based on this model. The experiments results confirm the proposed model.
-
Modulation of lung cancer growth arrest and apoptosis by Phellinus Linteus
Guo, Jinjin,Zhu, Tongbo,Collins, LeaAnn,Xiao, Zhi-Xiong J.,Kim, Sung-Hoon,Chen, Chang-Yan Alan R. Liss, Inc 2007 Molecular carcinogenesis Vol.46 No.2
<P>The Phellinus Linteus (PL) mushroom has been shown to possess anti-tumor properties. Through influencing lymphocytes, PL indirectly augments the host's immune system against cancer cells. PL has also been demonstrated to reduce tumor proliferation. However, the mechanisms of PL against malignant growth have not yet been fully explored. In this study, we report that PL mediates the following two activities in mouse and human lung cancer cells: cell-cycle arrest at a low concentration of PL and apoptosis in response to a high dose of PL. After exposure to a low dose of PL, G<SUB>1</SUB> growth arrest occurred in the lung cancer cells. The negative growth control mediated by PL is evidenced by the decrease of the activities of cyclin-dependent kinases CDK2, 4, and 6. In contrast, at high doses, PL-induced lung cancer cells to undergo apoptosis in a dose-dependent fashion. This was evidenced by DNA fragmentation, caspase activation, and loss of clonogenecity in the lung cancer cells, all of which were lacking in the lung cancer cells treated with low concentrations of PL as well as the normal mouse lung epithelial cells exposed to either low or high concentrations of PL. The addition of the caspase inhibitor Z-VADfmk completely suppressed PL-induced apoptosis. Furthermore, the low dose of PL was able to synergize with doxorubicin to induce apoptosis in the lung cancer cells. Thus, our findings suggest that PL regulates two responses in the lung cancer cells: cell-cycle arrest and apoptosis. © 2006 Wiley-Liss, Inc.</P>
KISS연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
