http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
α-수정결정에서 H^(+) 이온이 보상된 Fe^(3+) 공명중심에 대한 전자 자기공명 연구
최덕,손금종 명지대학교 자연과학연구소 2004 자연과학논문집 Vol.23 No.-
철(Fe)을 불순물로 첨가하여 성장시킨 α-수정결정에서 수소이온(H^(+))이 보상된 Fe^(3+) 공명중심에 대한 전자 자기공명 신호들을 X-밴드 분석기를 사용하여 상온에서 측정하였다. 결정학적 ab평면에서는 자기적으로 서로 다른 6개의 공명신호 무리들을 관측하였으며, bc평면에서는 공명중심의 두 자리들끼리 겹쳐진 3개의 공명신호 무리들을 측정하였다. ?? 와 ?? 행렬의 주축 방향들을 서로 다르게 함은 물론 g 인자의 비등방성을 허용하고 S^(4) 형태의 4차 스핀 항들을 포함하여 스핀 해밀토니안 매개변수들을 결정하였다. 그 결과 α-수정결정에서 H^(+) 이온에 보상된 Fe^(3+) 이온이 Si^(4+) 이온을 치환하고 H^(+) 이온은 Fe^(3+) 이온 주위의 다소 멀리 떨어진 산소이온(O^(2-)) 가까이 위치하는 것으로 판명되었다. Electron Magnetic resonance spectra of the hydrogen-compensated Fe^(3+) center in a synthetic iron-doped α-quartz crystal were measured at room temperature by employing a Bruker X-band spectrometer. In the crystallographic ab-plane the six magnetically inequivalent sites showed individual resonance lines. But in the bc-plane superposed spectra were observed due to degeneration of two equivalent sites, respectively. The spin-Hamiltonian parameters were determined, allowing for anisotropy of the g factor as well as ?? and ?? matrices noncoaxiality, and including the fourth-order spin terms of the from S^(4). The results give strong evidence that the center consist of a substitutional Fe^(3+)ion at a si^(4+) site and a charge compensating interstitial H^(+) ion near at (O^(2-)) ion positioned some away from Fe^(3+) ion.
금현기 ( Geum Hyeon-gi ),황덕일 ( Hwang Deok-il ),김정윤 ( Kim Jung-yun ),강호경 ( Kang Ho-kyoung ) 한국구조물진단유지관리공학회 2006 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.10 No.1
배수식 방수 방식으로 지하30m에 건설된 NATM터널 ㅇㅇ통신구를 준공 7년후 완전방수식 방식으로 변경하였다. 터널 라이닝에 30m의 수압을 작용할 경우 발생하는 단면력을 구조 검토하고 배근상태가 안전한가 분석하였다. 또한 라이닝의 시공단면을 확인하기 위하여 충격반향기법(Impact-Echo Method)탐사와 GPR탐사, 배근상태를 파악하기 위하여 철근탐지기를 사용하였다. 그 결과 30m 수압에 안전할 것이라는 판단하에 점착유연형 방수재의 배면주입공법을 적용 통신구를 완전방수 하였다. 또한 △△통신구에서는 구조적으로 취약한 T형 슬래브의 바닥이 솟아올라 파손되었으나 보강공사를 실시하여 소기의 방수 목적을 달성하였다.
SoC 프로그램의 원격디버깅 도구를 위한 USB-JTAG Adapter
구금서 ( Geum-seo Koo ),박명철 ( Myeong-chul Park ),하석운 ( Seok-wun Ha ),전용기 ( Yong-kee Jun ),임채덕 ( Chea-deok Lim ) 한국정보처리학회 2005 한국정보처리학회 학술대회논문집 Vol.12 No.2
SoC 프로그램은 타겟 시스템의 자원과 타이밍에 민감하여 실제 타겟 시스템과 동일한 환경에서 디버깅해야 하므로 호스트 시스템과 타겟 시스템간의 원격 접속을 위한 Adapter가 필수적으로 요구된다. 그러나 기존의 디버깅 도구에 사용되는 고가의 Adapter들은 도구에 제한적이기 때문에 다른 도구와의 연동이 불가능하다. 본 논문에서는 산업표준인 JTAG을 기반으로하는 SoC를 원격으로 제어하기 위한 고속의 USB-JTAG Adapter를 개발하여 GDB 기반의 경제적 원격 디버깅 도구를 개발할 수 있음을 보인다.
원격 디버깅환경을 위한 경제적인 USB-JTAG Adapter
구금서(Geum-Seo Koo),박명철(Myeong-Chul Park),하석운(Seok-Wun Ha),전용기(Yong-Kee Jun),임채덕(Chea-Deok Lim) 한국정보과학회 영남지부 2004 한국정보과학회 영남지부 학술발표논문집 Vol.12 No.1
임베디드 소프트웨어는 타겟 시스템의 자원과 타이밍에 민감하므로 실제 타겟 시스템과 동일한 환경에서 디버깅해야 한다. 이를 위하여 호스트 시스템과 타겟 시스템간의 원격 접속이 필수적이므로, 인터페이싱을 위한 부가적인 어텝터가 요구된다. 기존의 상용적인 ICE 장비들은 복잡한 시스템 제어를 위한 도구로서 대부분이 고가이다. 본 논문에서는 산업 표준화된 JTAG을 기반으로 원격 시스템에 접근하여 임베디드소프트웨어를 디버깅할 수 있는 USB-JTAG 어텝터를 제안한다. 따라서 본 논문은 원격 시스템내의 소프트웨어를 디버깅할 수 있는 저가의 경제적인 인터페이싱 환경을 제공한다.
금현기(Geum Hyeon-Gi),황덕일(Hwang Deok-Il),김정윤(Kim Jung-Yun),강호경(Kang Ho-Kyoung) 한국구조물진단유지관리학회 2006 한국구조물진단학회 학술발표회논문집 Vol.10 No.1
배수식 방수 방식으로 지하30m에 건설된 NATM터널 ㅇㅇ통신구를 준공 7년후 완전방수식 방식으로 변경하였다. 터널 라이닝에 30M의 수압을 작용할 경우 발생하는 단면력을 구조 검토하고 배근상태가 안전한가 분석하였다. 또한 라이닝의 시공단면을 확인하기 위하여 충격반향기법(Impact-Echo Method)탐사와 GPR탐사, 배근상태를 파악하기 위하여 철근탐지기를 사용하였다. 그 결과 30m 수압에 안전할 것이라는 판단하에 점착유연형 방수재의 배면주입공법을 적용 통신구를 완전방수 하였다. 또한 △△통신구에서는 구조적으로 취약한 T형 슬래브의 바닥이 솟아올라 파손되었으나 보강공사를 실시하여 소기의 방수 목적을 달성하였다.
The impact factors on 5-year survival rate in patients operated with oral cancer
Dong-Ho Geum,Young-Chea Roh,Sang-Yong Yoon,Hyo-Geon Kim,Jung-Han Lee,Jae-Min Song,Jae-Yeol Lee,Dae-Seok Hwang,Yong-Deok Kim,Sang-Hun Shin,In-Kyo Chung,Uk-Kyu Kim 대한구강악안면외과학회 2013 대한구강악안면외과학회지 Vol.39 No.5
Objectives: The purpose of this study is to analyze clinical impact factors on the survival rate, and to acquire basic clinical data for the diagnosis of oral cancer, for a determination of the treatment plan with long-term survival in oral cancer patients. Materials and Methods: Through a retrospective review of the medical records, the factors for long-term survival rate were analyzed. Thirty-seven patients, among patient database with oral cancer treated in the Department of Oral and Maxillofacial Surgery at Pusan National University Hospital within a period from March 1998 to March 2008, were selected within the study criteria and were followed-up for more than 5 years. The analyzed factors were gender, age, drinking, smoking, primary tumor site, type of cancer, TNM stage, recurrence of affected region, and metastasis of cervical lymph node. The 5-year survival rate on the impact factors was calculated statistically using the Kaplan-Meier method. Results: By classification of clinical TNM at the 1st visit, there were 11 (29.7%) cases for stage I, 11 (29.7%) cases for stage II, 3 (8.1%) cases for stage III, and 12 (32.5%) cases for stage IV. The 5-year survival rate of total oral cancer patients after the operation were 75.7%, pathological TNM stage related 5-year survival rate were as follows: stage I 90.0%, stage II 81.8%, stage III 100% and stage IV 45.5%; in which the survival rate difference by each stage was significantly observed. The recurrence of cervical lymph node was the significant impact factor for the survival rate, because only 30.0% the survival rate in recurrent cases existed. During the follow-up, there were 15 (40.5%) patients with confirmed recurrence, and the 5-year survival rate of these patients was decreased as 46.7%. Conclusion: The classification of clinical and pathological TNM stage, local recurrence after surgery, and metastasis of cervical lymph node after surgery were analyzed as the 3 most significant factors.
A sliding discharge-type EHD gas pump utilizing a saw-toothed-plate discharge electrode
Moon, Jae-Duk,Hwang, Deok-Hyun,Jung, Jae-Seung,Kim, Jin-Gyu,Geum, Sang-Taek IEEE 2010 IEEE transactions on dielectrics and electrical in Vol.17 No.3
<P>A sliding discharge-type electrohydrodynamic (EHD) gas pump, utilizing a discrete saw-toothed-plate electrode as a discharge electrode instead of a smooth conventionalplate electrode, has been developed. The effect of the saw-toothed-plate electrode on the gas flow velocity and yield of flow generation of the EHD gas pump were investigated. It was observed that the EHD gas pump can generate a higher gas flow velocity and yield of flow generation than the same design EHD gas pump with the conventionalplate electrode. As a result, a peak gas flow velocity of V<SUB>G</SUB>=1.65 m/s from the EHD gas pump with the saw-toothed-plate electrode can be obtained for V<SUB>P</SUB>=12.0 kV, which is 2.39 times higher than that of V<SUB>G</SUB> =0.69 m/s of the same design EHD gas pump with the conventional-plate electrode. With the saw-toothed-plate electrode, the yield of flow generation of Y<SUB>G</SUB>=0.435 m/Ws can be obtained for V=8.0 kV, which is 4.53 times higher than that of the same design EHD gas pump with the conventional-plate electrode of Y<SUB>G</SUB>=0.096 m/Ws. These enhancements are due to the effect of the saw-toothed-plate electrode being utilized instead of the conventional-plate electrode.</P>