Apolipoproteins as Differentiating and Predictive Markers for Assessing Clinical Outcomes in Patients with Small Cell Lung Cancer

Jian Shi,Huichai Yang,Xiaoyang Duan,Lihua Li,Lulu Sun,Qian Li,Junjun Zhang 연세대학교의과대학 2016 Yonsei medical journal Vol.57 No.3

Purpose: The present study aimed to investigate the value of apolipoproteins, including ApoA-1, ApoC-III, and ApoE, in patients with small cell lung cancer (SCLC) as potential biomarkers for diagnosis, prognosis, and cancer progression. Materials and Methods: Lung samples were collected from 89 patients with SCLC. Nineteen lung samples from non-small cell lung cancer (NSCLC) patients and 12 normal lung tissues were used as controls. Expression profiles of ApoA-1, ApoC-III, and ApoE in different samples were examined using immunohistochemical methods, and the expression levels were correlated with cancer types, treatment, and outcomes using chi-square and Mann-Whitney tests. Results: Expression of ApoA-1 and ApoC-III in SCLC was significantly different, compared with that in NSCLC and normal lung tissues, and was correlated with recurrence of SCLC. Patients undergoing neoadjuvant chemotherapy before surgery showed significantlyreduced expression of ApoA-1 and increased expression of ApoC-III and ApoE. Nevertheless, the expression levels of ApoA-1, ApoC-III, and ApoE were not correlated with SCLC staging. Conclusion: ApoA-1 and ApoC-III may be used as differentiating and predictive markers for SCLC. ApoA-1, ApoC-III, and ApoE may be used to monitor the efficacy of chemotherapy.

Tuning the acidity of sulfonic functionalized ionic liquids for highly efficient and selective synthesis of terpene esters

Duan-Jian Tao,Yan Dong,Zhi-Jun Cao,Feng-Feng Chen,Xiang-Shu Chen,Kuan Huang 한국공업화학회 2016 Journal of Industrial and Engineering Chemistry Vol.41 No.-

A series of sulfonic functionalized ionic liquids (SFILs) with different acidity were designed and preparedfor the synthesis of terpene esters (e.g. geranyl acetate). The effect of acidity of SFILs on their performancewas investigated systematically. It is found that tuning the acidity of SFILs to an appropriate value resultsin not only high conversion of geraniol but also superior selectivity of geranyl acetate. The SFILs can beeasily separated from products byfiltration under room temperature, thus showing good reusability. Furthermore, the kinetics for SFILs in the esterification of geraniol were determined as the basis for futureprocess design.

Remarkably efficient hydrolysis of cinnamaldehyde to natural benzaldehyde in amino acid ionic liquids

Duan-Jian Tao,Xiang-Shu Chen,Shu Xu,Feng-Feng Chen,Yan Zhou,Xin Zhao,Li-Li Yu,Kuan Huang 한국화학공학회 2016 Korean Journal of Chemical Engineering Vol.33 No.12

The hydrolysis of cinnamaldehyde to natural benzaldehyde was investigated systematically using tetramethylammonium- based amino acid ionic liquids as homogeneous catalysts. The results indicated that tetramethylammonium prolinate ([N1111][Pro]) can be a powerful catalyst for the highly efficient hydrolysis of cinnamaldehyde, in which natural benzaldehyde was obtained with almost 94% yield and over 99% selectivity in 1 h. Moreover, kinetic study showed that compared with other catalysts, the catalytic system of [N1111][Pro] has a lower activation energy of 38.30 kJ·mol−1 in the hydrolysis reaction, indicating superior catalytic performance of [N1111][Pro]. Quantum-mechanical calculations further manifested that such high performance originates from the cooperative catalysis of the secondary amino and carboxyl group in the anion [Pro].

A Study on the Decoding Challenges in a Streaming Media Environment Focused on the Youtube

Jian-Zhou Duan,Won-Ho Choi 한국콘텐츠학회 2023 한국콘텐츠학회 ICCC 논문집 Vol.2023 No.12

Quantitative Reduction of Basilar Invagination With Atlantoaxial Dislocation by a Posterior Approach

Jian Guan,Fengzeng Jian,Qingyu Yao,Chenghua Yuan,Can Zhang,Longbing Ma,Zhenlei Liu,Wanru Duan,Xingwen Wang,Xuefeng Bo,Zan Chen 대한척추신경외과학회 2020 Neurospine Vol.17 No.3

Objective: This study evaluated the feasibility and efficacy of quantitative reduction and fixation to treat basilar invagination (BI) with atlantoaxial dislocation (AAD). Methods: Posterior occipitocervical angle (POCA), occiput–C2 angle (Oc–C2A), clivusaxial angle (CAA), and C2–7 angle (C2–7A) were considered for quantitative reduction. Twelve patients with BI complicated with AAD received posterior interarticular release and individualized cage implantation to restore vertical dislocation. The POCA was adjusted using cantilever technology to further reduce the horizontal dislocation and adjust lower cervical vertebral angle. All patients received a radiological follow-up for ≥12 months. Improvements in spinal cord function were evaluated using Japanese Orthopedic Association (JOA) score. Results: All the patients received successful quantitative reduction for BI-AAD, and bony fusion was achieved without spinal cord injury after surgery for 12 months. The JOA score was improved significantly to 15.2 ± 0.9 twelve months after surgery (p < 0.01). Radiological follow-up revealed that individualized cage and POCA play vital roles in quantitative correction: (1) distance of the dens above McRae’s line and atlantodens interval were restored to normal level, respectively; (2) changes in Oc–C2 angle (ΔOc–C2A), C2–7 angle (ΔC2–7A), clivus-axial angle (ΔCAA), and POCA (ΔPOCA) were all caused by changes in axis tilt. Based on the changes of radiological parameter we deduced the formula for quantitative reduction by linear regression analysis: -ΔPOCA = ΔOc–C2A = -ΔC2–7A = ΔCAA. Conclusion: Quantitative posterior reduction by individualized cage and adjusting ΔPOCA is feasible for treating BI with AAD.

Reconstruction of the Cervical Lateral Mass Using 3-Dimensional-Printed Prostheses

Qiang Jian,Zhenlei Liu,Wanru Duan,Jian Guan,Fengzeng Jian,Zan Chen 대한척추신경외과학회 2022 Neurospine Vol.19 No.1

Objective: This study aimed to investigate the outcome of using 3-dimensional (3D)-printed prostheses to reconstruct a cervical lateral mass to maintain cervical stability. Methods: We retrospectively analyzed data of 7 patients who underwent cervical lateral mass reconstruction using a 3D-printed prosthesis, comprising axial and subaxial lateral mass reconstruction in 2 and 5 patients, respectively. Bilateral mass was reconstructed in 1 patient and unilateral mass in the remaining 6 patients. Results: Using a 3D-printed lateral mass prosthesis, internal fixation was stable for all 7 patients postoperatively. No implant-related complications such as prosthesis loosening, displacement, and compression were observed at the last follow-up. Conclusion: Reconstruction of the lateral mass structure is beneficial in restoring load transfer in the cervical spine under physiological conditions. A 3D-printed prosthesis can be considered a good option for reconstruction of the lateral mass as fusion was achieved, with no subsequent complications observed.

Location Distribution of Fistulas and Surgical Strategies for Spinal Extradural Meningeal Cysts: A Retrospective Analysis of 30 Cases at a Single Center

Qiang Jian,Gang Song,Zhenlei Liu,Wanru Duan,Jian Guan,Fengzeng Jian,Zan Chen 대한척추신경외과학회 2022 Neurospine Vol.19 No.1

Objective: This study aimed to illustrate the features of fistula location distribution, surgical strategies, and outcomes in spinal epidural meningeal cysts (SEMCs). Methods: The authors searched and reviewed the medical records for cases of SEMCs. Imaging features, operative reports, and media were reviewed to accurately describe the surgical techniques employed. We recorded the level and laterality of the fistula according to the operative report and the media. Consistency analysis was performed on the dominant laterality of the cyst on preoperative axial magnetic resonance imaging and laterality of the fistula in the operative media or report. When cyst and fistula lateralities were the same, they were considered consistent. Finally, the Japanese Orthopedic Association (JOA) score was used to obtain patient-reported results at each follow-up. Results: Thirty patients with SEMCs were identified. Fistula repair was performed in all patients. Two patients experienced cyst recurrence after surgery and were repaired during the second surgery. Based on imaging findings, SEMCs mostly occurred in the thoracolumbar junction. Most of the fistulas (87.88%) were at the T12 or L1 levels. In patients with multiple adjacent SEMCs, the fistula may be at one end of the cyst rather than in the middle level of the cyst. A fistula laterality of 72.72% was consistent with cyst laterality. The JOA improvement rate was 61.84% ± 26.63%. Conclusion: Most fistulas were always located at the T12–L1 level as well as the middle level of the cyst, which is always consistent with cyst laterality. In patients with multiple adjacent SEMCs, the fistula may be at one end of the cyst. Cleft closure is key to healing SEMCs.

Effects of the Maceration Enzymes on Evolution of Pyranoanthocyanins and Cinnamic Acids During the Cabernet Gernischet (Vitis vinifera L. cv.) Red Wine Making

Jian-Jun He,Fu-Liang Han,Qing-Quan Yu,Qiu-Hong Pan,Chang-Qing Duan,Guo-Li Cheng 한국식품과학회 2010 Food Science and Biotechnology Vol.19 No.3

The effects of the maceration enzymes on the evolution of 4-vinylphenols pyranoanthocyanins and cinnamic acids were investigated during the Cabernet Gernischet red wine making. The results showed that the contents of p-coumaric acid and caffeic acid in the maceration enzyme-treated wine (the treated wine) were higher than those in the maceration enzyme-untreated wine (the control wine) at the alcoholic fermentation (AF),maceration (M), and malolactic fermention (MLF) stages. Malvidin-3-O-glucoside-4-vinylphenol (Mv-glu-vp) and malvidin-3-O-(6-O-acetyl)-glucoside-4-vinylphenol (Mvacet-glu-vp) were formed at the AF and M stages in the treated wine, while they were formed at the end of MLF stage in the control wine. However, the contents of these 2kinds of 4-vinylphenol pyranoanthocyanins in the control wine were higher than those in the treated wine during aging. These results showed that the use of maceration enzymes in winemaking can promote p-coumaric acid and p-caffeic acid transformed to vinylphenols and accelerate the formation of pyranoanthocyanins.

Apply Partition Tree to Compute Canonical Labelings of Graphs

HAO Jian-Qiang,GONG Yun-Zhan,Tan Li,Duan Da-Gao 보안공학연구지원센터 2016 International Journal of Grid and Distributed Comp Vol.9 No.5

This paper establishes a theoretical framework by defining a set of concepts useful for classifying graphs and computing the canonical labeling Cmax(G) of a given undirected graph G, which including the partition tree PartT(G), maximum partition tree MaxPT(G), centre subgraph Cen(G), standard regular sequence SRQ(G), standard maximum regular sequence SMRQ(G), and so on. The implementations of algorithms 1 to 5 show how to calculate them accordingly. The worst time complexities of algorithms 1, 2, 4, and 5 are O(n2) respectively. The time complexity of Algorithm 3 is O(n). By Theorem 3, all leaf nodes of PartT(G) and MaxPT(G) are the regular subgraphs. By Theorem 4 and 5, there exists only one Cen(G) in G. Regular Partition Theorem 6 shows that there exists just one corresponding PartT(G), SRQ(G), MaxPT(G), and SMRQ(G). One can use Classification Theorem 7 to category graphs. Theorem 8 and 9 establish the link between the Cen(G) and the calculation of the first node u1 added into MaxQ(G) corresponding to the canonical labeling Cmax(G) of G. Further, it utilizes the Cen(G) to calculate the first node u1 added into MaxQ(G). The proposed methods can be extended to deal with the directed graphs and weighted graphs.

Effect of Contact Pressure on Reciprocating Wear Behavior of PEEK, PTFE, and UHMWPE

Liu Lian,Duan Haitao,Jia Dan,Tu Jiesong,Zhan Shengpeng,Li Yinhua,Luo Xiaoshuang,Zhan Wen,Xiong Wei,Li Jian 한국고분자학회 2020 폴리머 Vol.44 No.6

Engineering plastics are macromolecular compounds composed of covalently bonded macromolecules, which have been widely used in sliding wear-resistance materials in isolation bearings. In this study, an MFT-5000 reciprocating friction testing machine was used to compare the friction and wear performance of polyetheretherketone (PEEK), polytetrafluoroethylene (PTFE), and ultra-high molecular weight polyethylene (UHMWPE) under heavy load conditions in dry friction condition. The results show that load has a significant effect on the friction coefficient, wear rate, and wear mechanism of three materials. The instant friction coefficient of PTFE fluctuates under high load, the wear rate clearly increases with the increase in load. Therefore, the application under high load conditions is limited. The wear rate of UHMWPE is the least affected by the load among the three materials. Even when the load exceeds the yield strength, the wear resistance is still good. The friction coefficient of PEEK decreases with the increase in load but maintains a high value that restricts its application in sliding friction pair materials to some degree.