http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
C<sup>1</sup>-STABLY SHADOWABLE CONSERVATIVE DIFFEOMORPHISMS ARE ANOSOV
Bessa, Mario Korean Mathematical Society 2013 대한수학회보 Vol.50 No.5
In this short note we prove that if a symplectomorphism $f$ is $C^1$-stably shadowable, then $f$ is Anosov. The same result is obtained for volume-preserving diffeomorphisms.
STABLE WEAK SHADOWABLE SYMPLECTOMORPHISMS ARE PARTIALLY HYPERBOLIC
Bessa, Mario,Vaz, Sandra Korean Mathematical Society 2014 대한수학회논문집 Vol.29 No.2
Let M be a closed, symplectic connected Riemannian manifold and f a symplectomorphism on M. We prove that if f is $C^1$-stably weak shadowable on M, then the whole manifold M admits a partially hyperbolic splitting.
C1-STABLY SHADOWABLE CONSERVATIVE DIFFEOMORPHISMS ARE ANOSOV
Mario Bessa 대한수학회 2013 대한수학회보 Vol.50 No.5
In this short note we prove that if a symplectomorphism f is C1-stably shadowable, then f is Anosov. The same result is obtained for volume-preserving diffeomorphisms.
Lins, Rodrigo Barros Esteves,Cordeiro, Jairo Matozinho,Rangel, Carolina Perez,Antunes, Thiago Bessa Marconato,Martins, Luis Roberto Marcondes The Korean Academy of Conservative Dentistry 2019 Restorative Dentistry & Endodontics Vol.44 No.4
Objectives: This study evaluated the bond strength of various fiberglass post cementation techniques using different resin-based composites. Materials and Methods: The roots from a total of 100 bovine incisors were randomly assigned to 5 treatment groups: G1, post + Scotchbond Multi-Purpose (SBMP) + RelyX ARC luting agent; G2, relined post (Filtek Z250) + SBMP + RelyX ARC; G3, individualized post (Filtek Z250) + SBMP; G4, individualized post (Filtek Bulk-Fill) + SBMP; G5, individualized post (Filtek Bulk-Fill Flow) + SBMP. The samples were subjected to the push-out (n = 10) and pull-out (n = 10) bond strength tests. Data from the push-out bond strength test were analyzed using 2-way analysis of variance (ANOVA) with the Bonferroni post hoc test, and data from the pull-out bond strength test were analyzed using 1-way ANOVA. Results: The data for push-out bond strength presented higher values for G2 and G5, mainly in the cervical and middle thirds, and the data from the apical third showed a lower mean push-out bond strength in all groups. No significant difference was noted for pull-out bond strength among all groups. The most frequent failure modes observed were adhesive failure between dentine and resin and mixed failure. Conclusions: Fiberglass post cementation using restorative and flowable bulk-fill composites with the individualization technique may be a promising alternative to existing methods of post cementation.
Rodrigo Barros Esteves Lins,Jairo Matozinho Cordeiro,Carolina Perez Rangel,Thiago Bessa Marconato Antunes,Luís Roberto Marcondes Martins 대한치과보존학회 2019 Restorative Dentistry & Endodontics Vol.44 No.4
Objectives This study evaluated the bond strength of various fiberglass post cementation techniques using different resin-based composites. Materials and Methods The roots from a total of 100 bovine incisors were randomly assigned to 5 treatment groups: G1, post + Scotchbond Multi-Purpose (SBMP) + RelyX ARC luting agent; G2, relined post (Filtek Z250) + SBMP + RelyX ARC; G3, individualized post (Filtek Z250) + SBMP; G4, individualized post (Filtek Bulk-Fill) + SBMP; G5, individualized post (Filtek Bulk-Fill Flow) + SBMP. The samples were subjected to the push-out (n = 10) and pull-out (n = 10) bond strength tests. Data from the push-out bond strength test were analyzed using 2-way analysis of variance (ANOVA) with the Bonferroni post hoc test, and data from the pull-out bond strength test were analyzed using 1-way ANOVA. Results The data for push-out bond strength presented higher values for G2 and G5, mainly in the cervical and middle thirds, and the data from the apical third showed a lower mean push-out bond strength in all groups. No significant difference was noted for pull-out bond strength among all groups. The most frequent failure modes observed were adhesive failure between dentine and resin and mixed failure. Conclusions Fiberglass post cementation using restorative and flowable bulk-fill composites with the individualization technique may be a promising alternative to existing methods of post cementation.
Development of a DNA-dosimeter system for monitoring the effects of solar-ultraviolet radiation
Schuch, Andre Passaglia,Da Silva Galhardo, Rodrigo,De Lima-Bessa, Keronninn Moreno,Schuch, Nelson Jorge,Menck, Carlos Frederico Martins Korean Society of Photoscience 2009 Photochemical & photobiological sciences Vol.8 No.1
Solar radiation sustains and affects all life forms on Earth. In recent years, the increase in environmental levels of solar-UV radiation due to depletion of the stratospheric ozone layer, as a result of anthropogenic emission of destructive chemicals, has highlighted serious issues of social concern. This becomes still more dramatic in tropical and subtropical regions, where the intensity of solar radiation is higher. To better understand the impact of the harmful effects of solar-UV radiation on the DNA molecule, we developed a reliable biological monitoring system based on the exposure of plasmid DNA to artificial UV lamps and sunlight. The determination and quantification of different types of UV photoproducts were performed through the use of specific DNA repair enzymes and antibodies. As expected, a significant number of CPDs and 6-4PPs was observed when the DNA-dosimeter system was exposed to increasing doses of UVB radiation. Moreover, CPDs could also be clearly detected in plasmid DNA when this system was exposed to either UVA or directly to sunlight. Interestingly, although less abundant, 6-4PPs and oxidative DNA damage were also generated after exposure to both UVA and sunlight. These results confirm the genotoxic potential of sunlight, reveal that UVA may also produce CPDs and 6-4PPs directly in naked DNA and demonstrate the applicability of a DNA-dosimeter system for monitoring the biological effects of solar-UV radiation.
Eduardo de Paula Miranda,Cristiano Mendes Gomes,Fábio César Miranda Torricelli,José de Bessa Júnior,José Everton de Castro,Bruno Roberto da Silva Ferreira,Ariel Gustavo Scafuri,Homero Bruschini,Miguel 대한배뇨장애요실금학회 2014 International Neurourology Journal Vol.18 No.2
Purpose: Lower urinary tract symptoms are numerous, but the specific impact of each of these symptoms on the quality of life (QoL) has not been evaluated in community-dwelling men. An assessment of these symptoms and their effects on QoL was the focus of this study. Methods: We performed a cross-sectional study with 373 men aged >50 years from a community setting. Patients completed the International Prostate Symptom Score questionnaire, which includes questions on each of the specific urinary symptoms and a question addressing health-related QoL that are graded from 0 to 5. We used the Pearson correlation test to assess the impact of each symptom on QoL. Results: Nocturia (58.9%) was the most prevalent urinary symptom. The mean score was 0.9±1.4 for incomplete emptying, 1.0±1.5 for frequency, 0.9±1.3 for intermittency, 0.8±1.3 for urgency, 1.0±1.5 for weak stream, 0.5±1.0 for straining, and 2.0±1.6 for nocturia. Nocturia and frequency were the only symptoms associated with poorer QoL, with nocturia showing a stronger association. Conclusions: Nocturia affects 50% of community dwelling men aged >50 years, and is the lower urinary tract symptom with the greatest negative impact on QoL.
Cabral, Maria Fernanda Costa,Martinho, Roberto Luiz de Menezes,Guedes-Neto, Manoel Valcacio,Rebelo, Maria Augusta Bessa,Pontes, Danielson Guedes,Cohen-Carneiro, Flavia The Korean Academy of Conservative Dentistry 2015 Restorative Dentistry & Endodontics Vol.40 No.3
Objectives: The aim of this study was to evaluate the fluoride release of conventional glass ionomer cements (GICs) and resin-modified GICs. Materials and Methods: The cements were grouped as follows: G1 (Vidrion R, SS White), G2 (Vitro Fil, DFL), G3 (Vitro Molar, DFL), G4 (Bioglass R, Biodinamica), and G5 (Ketac Fil, 3M ESPE), as conventional GICs, and G6 (Vitremer, 3M ESPE), G7 (Vitro Fil LC, DFL), and G8 (Resiglass, Biodinamica) as resin-modified GICs. Six specimens (8.60 mm in diameter; 1.65 mm in thickness) of each material were prepared using a stainless steel mold. The specimens were immersed in a demineralizing solution (pH 4.3) for 6 hr and a remineralizing solution (pH 7.0) for 18 hr a day. The fluoride ions were measured for 15 days. Analysis of variance (ANOVA) and Tukey's test with 5% significance were applied. Results: The highest amounts of fluoride release were found during the first 24 hr for all cements, decreasing abruptly on day 2, and reaching gradually decreasing levels on day 7. Based on these results, the decreasing scale of fluoride release was as follows: G2 > G3 > G8 = G4 = G7 > G6 = G1 > G5 (p < 0.05). Conclusions: There were wide variations among the materials in terms of the cumulative amount of fluoride ion released, and the amount of fluoride release could not be attributed to the category of cement, that is, conventional GICs or resin-modified GICs.
Maria Fernanda Costa Cabral,Roberto Luiz de Menezes Martinho,Manoel Valcácio Guedes-Neto,Maria Augusta Bessa Rebelo,Danielson Guedes Pontes,Flávia Cohen-Carneiro 대한치과보존학회 2015 Restorative Dentistry & Endodontics Vol.40 No.3
Objectives: The aim of this study was to evaluate the fluoride release of conventional glass ionomer cements (GICs) and resin-modified GICs. Materials and Methods: The cements were grouped as follows: G1 (Vidrion R, SS White), G2 (Vitro Fil, DFL), G3 (Vitro Molar, DFL), G4 (Bioglass R, Biodinâmica), and G5 (Ketac Fil, 3M ESPE), as conventional GICs, and G6 (Vitremer, 3M ESPE), G7 (Vitro Fil LC, DFL), and G8 (Resiglass, Biodinâmica) as resin-modified GICs. Six specimens (8.60 mm in diameter; 1.65 mm in thickness) of each material were prepared using a stainless steel mold. The specimens were immersed in a demineralizing solution (pH 4.3) for 6 hr and a remineralizing solution (pH 7.0) for 18 hr a day. The fluoride ions were measured for 15 days. Analysis of variance (ANOVA) and Tukey’s test with 5% significance were applied. Results: The highest amounts of fluoride release were found during the first 24 hr for all cements, decreasing abruptly on day 2, and reaching gradually decreasing levels on day 7. Based on these results, the decreasing scale of fluoride release was as follows: G2 > G3 > G8 = G4 = G7 > G6 = G1 > G5 (p < 0.05). Conclusions: There were wide variations among the materials in terms of the cumulative amount of fluoride ion released, and the amount of fluoride release could not be attributed to the category of cement, that is, conventional GICs or resin-modified GICs.