Control of wind-induced motion in high-rise buildings with hybrid TM/MR dampers

Aly Mousaad Aly 한국풍공학회 2015 Wind and Structures, An International Journal (WAS Vol.21 No.5

In recent years, high-rise buildings received a renewed interest as a means by which technical and economic advantages can be achieved, especially in areas of high population density. Taller and taller buildings are being built worldwide. These types of buildings present an asset and typically are built not to fail under wind loadings. The increase in a building\'s height results in increased flexibility, which can lead to significant vibrations, especially at top floors. Such oscillations can magnify the overall loads and can be annoying to the top floors\' occupants. This paper shows that increased stiffness in high-rise buildings may not be a feasible solution and may not be used for the design for comfort and serviceability. High-rise buildings are unique, and a vibration control system for a certain building may not be suitable for another. Even for the same building, its behavior in the two lateral directions can be different. For this reason, the current study addresses the application of hybrid tuned mass and magneto-rheological (TM/MR) dampers that can work for such types of buildings. The proposed control scheme shows its effectiveness in reducing floors\' accelerations for both comfort and serviceability concerns. Also, a dissipative analysis carried out shows that the MR dampers are working within the possible range of optimum performance. In addition, the design loads are dramatically reduced, creating more resilient and sustainable buildings. The purpose of this paper is to stimulate, shape, and communicate ideas for emerging control technologies that are essential for solving wind related problems in high-rise buildings, with the objective to build the more resilient and sustainable infrastructure and to optimally retrofit existing structures.

Proposed approach for determination of tributary areas for scattered pressure taps

Aly Mousaad ALY 한국풍공학회 2013 Wind and Structures, An International Journal (WAS Vol.16 No.6

In wind load calculations based on pressure measurements, the concept of ‘tributary area’ is usually used. The literature has less guidance for a systematic computational methodology for calculating tributary areas, in general, and for scattered pressure taps, in particular. To the best of the author’s knowledge, there is no generic mathematical equation that helps calculate the tributary areas for irregular pressure taps. Traditionally, the drawing of tributary boundaries for scattered and intensively distributed taps may not be feasible (a time and resource consuming task). To alleviate this problem, this paper presents a proposed numerical approach for tributary area calculations on rectangular surfaces. The approach makes use of the available coordinates of the pressure taps and the dimensions of the surface. The proposed technique is illustrated by two application examples: first, quasi-regularly distributed pressure taps, and second, taps that have scattered distribution on a rectangular surface. The accuracy and the efficacy of the approach are assessed, and a comparison with a traditional method is presented.

Examination of Correlations Between Several Biochemical Components and Powdery Mildew Resistance of Flax Cultivars

Aly, Aly A.,Mansour, Mahmoud T. M.,Mohamed, Heba I.,Abd-Elsalam, Kamel A. The Korean Society of Plant Pathology 2012 Plant Pathology Journal Vol.28 No.2

A field trial was conducted in 2009/2010 and 2010/2011 growing seasons at Giza Agricultural Research Station to examine correlations between some biochemical componets and powdery mildews ($PM_s$) resistance in flax cultivars. Nine flax cultivars could be divided into five distinct groups, i.e., highly susceptible (Cortland and C.I. 2008), moderately susceptible (Giza 7, and Marshall), moderately resistant (Cass), resistant (Koto, Dakota and Wilden), and highly resistant (Ottowa 770B). The cultivars showed considerable variation in PM severity ranged from 8.05 on Ottowa 770B to 97.02% on Cortland. Total soluble proteins, total phenols, antioxidant enzymes (peroxidase and polyphenoloxidase), ascorbic acid, tocopherol, and malondialdehyde (MDA), were determined in uninfected leaves of the tested cultivars. Pearson's correlation coefficient was calculated to measure the degree of association between PM severity and each component. All components showed significant (P < 0.05) or highly significant (P < 0.01) negative correlation with PM severity except MDA, which showed positive correlation (P < 0.01). Linear regression analysis was used to evaluate the causal relationship between the biochemical components (independent variables) and PM severity (dependent variable). Coefficient of determination ($R^2$) values of the generated models ranged from 48.76 to 77.15%. Tocopherol, MDA, and proteins were the most important contributors to the total variation in PM severity as the $R^2$ values of their models were 71.78, 75.28, and 77.15%, respectively. The results of the present study suggest that tocopherol, MDA, and proteins in uninfected leaves can be used as biochemical markers to predict PM resistance in flax.

Control of wind-induced motion in high-rise buildings with hybrid TM/MR dampers

Aly, Aly Mousaad Techno-Press 2015 Wind and Structures, An International Journal (WAS Vol.21 No.5

In recent years, high-rise buildings received a renewed interest as a means by which technical and economic advantages can be achieved, especially in areas of high population density. Taller and taller buildings are being built worldwide. These types of buildings present an asset and typically are built not to fail under wind loadings. The increase in a building's height results in increased flexibility, which can lead to significant vibrations, especially at top floors. Such oscillations can magnify the overall loads and can be annoying to the top floors' occupants. This paper shows that increased stiffness in high-rise buildings may not be a feasible solution and may not be used for the design for comfort and serviceability. High-rise buildings are unique, and a vibration control system for a certain building may not be suitable for another. Even for the same building, its behavior in the two lateral directions can be different. For this reason, the current study addresses the application of hybrid tuned mass and magneto-rheological (TM/MR) dampers that can work for such types of buildings. The proposed control scheme shows its effectiveness in reducing floors' accelerations for both comfort and serviceability concerns. Also, a dissipative analysis carried out shows that the MR dampers are working within the possible range of optimum performance. In addition, the design loads are dramatically reduced, creating more resilient and sustainable buildings. The purpose of this paper is to stimulate, shape, and communicate ideas for emerging control technologies that are essential for solving wind related problems in high-rise buildings, with the objective to build the more resilient and sustainable infrastructure and to optimally retrofit existing structures.

Facile Synthesis of New Pyrazolopyrimidine Derivatives of Potential Biosignificant Interest

Aly, Aly A.,El-Karim, Iman A. Gad Korean Chemical Society 2011 대한화학회지 Vol.55 No.5

An easy and efficient route for the synthesis of some imidazo[1,2-c]pyrazolo[4,3-e]pyrimidines 3-6, imidazo[1,2-c]pyrazolo[4,3-e]triazine 8, pyrazolo[4,3-e]triazolo[1,5-c]pyrimidines 12-15 and pyrazolo-[3',4':4,5]pyrimido[1,6-b]triazines 16, 17 was described through the reaction of readily available 5-aminopyrazole-4-carbonitrile 1 with different reagents. The in vitro antimicrobial activity of some synthesized compounds was examined. Most of the tested compounds proved to be active as antibacterial and antifungal agents.

Examination of Correlations Between Several Biochemical Components and Powdery Mildew Resistance of Flax Cultivars

Aly A. Aly,Kamel A. Abd-Elsalam,Mahmoud T. M. Mansour,Heba I. Mohamed 한국식물병리학회 2012 Plant Pathology Journal Vol.28 No.2

A field trial was conducted in 2009/2010 and 2010/2011growing seasons at Giza Agricultural Research Station to examine correlations between some biochemical componets and powdery mildews (PMs) resistance in flax cultivars. Nine flax cultivars could be divided into five distinct groups, i.e., highly susceptible (Cortland and C.I. 2008), moderately susceptible (Giza 7, and Marshall),moderately resistant (Cass), resistant (Koto, Dakota and Wilden), and highly resistant (Ottowa 770B). The cultivars showed considerable variation in PM severity ranged from 8.05 on Ottowa 770B to 97.02% on Cortland. Total soluble proteins, total phenols, antioxidant enzymes (peroxidase and polyphenoloxidase), ascorbic acid, tocopherol, and malondialdehyde (MDA), were determined in uninfected leaves of the tested cultivars. Pearson’s correlation coefficient was calculated to measure the degree of association between PM severity and each component. All components showed significant (P < 0.05) or highly significant (P < 0.01) negative correlation with PM severity except MDA, which showed positive correlation (P < 0.01). Linear regression analysis was used to evaluate the causal relationship between the biochemical components (independent variables)and PM severity (dependent variable). Coefficient of determination (R2) values of the generated models ranged from 48.76 to 77.15%. Tocopherol, MDA, and proteins were the most important contributors to the total variation in PM severity as the R2 values of their models were 71.78, 75.28, and 77.15%, respectively. The results of the present study suggest that tocopherol,MDA, and proteins in uninfected leaves can be used as biochemical markers to predict PM resistance in flax.

Proposed approach for determination of tributary areas for scattered pressure taps

Aly, Aly Mousaad Techno-Press 2013 Wind and Structures, An International Journal (WAS Vol.16 No.6

In wind load calculations based on pressure measurements, the concept of 'tributary area' is usually used. The literature has less guidance for a systematic computational methodology for calculating tributary areas, in general, and for scattered pressure taps, in particular. To the best of the author's knowledge, there is no generic mathematical equation that helps calculate the tributary areas for irregular pressure taps. Traditionally, the drawing of tributary boundaries for scattered and intensively distributed taps may not be feasible (a time and resource consuming task). To alleviate this problem, this paper presents a proposed numerical approach for tributary area calculations on rectangular surfaces. The approach makes use of the available coordinates of the pressure taps and the dimensions of the surface. The proposed technique is illustrated by two application examples: first, quasi-regularly distributed pressure taps, and second, taps that have scattered distribution on a rectangular surface. The accuracy and the efficacy of the approach are assessed, and a comparison with a traditional method is presented.

A case study of protecting bridges against overheight vehicles

Aly Mousaad ALY,Marc A. Hoffmann 국제구조공학회 2022 Steel and Composite Structures, An International J Vol.43 No.2

Most transportation departments have recognized and developed procedures to address the ever-increasing weights of trucks traveling on bridges in a service today. Transportation agencies also recognize the issues with overheight vehicles’ collisions with bridges, but few stakeholders have definitive countermeasures. Bridges are becoming more vulnerable to collisions from overheight vehicles. The exact response under lateral impact force is difficult to predict. In this paper, nonlinear impact analysis shows that the degree of deformation recorded through the modeling of the unprotected vehicle-girder model provides realistic results compared to the observation from the US-61 bridge overheight vehicle impact. The predicted displacements are 0.229 m, 0.161 m, and 0.271 m in the girder bottom flange (lateral), bottom flange (vertical), and web (lateral) deformations, respectively, due to a truck traveling at 112.65 km/h. With such large deformations, the integrity of an impacted bridge becomes jeopardized, which in most cases requires closing the bridge for safety reasons and a need for rehabilitation. We proposed different sacrificial cushion systems to dissipate the energy of an overheight vehicle impact. The goal was to design and tune a suitable energy absorbing system that can protect the bridge and possibly reduce stresses in the overheight vehicle, minimizing the consequences of an impact. A material representing a Sorbothane high impact rubber was chosen and modeled in ANSYS. Out of three sacrificial schemes, a sandwich system is the best in protecting both the bridge and the overheight vehicle. The mitigation system reduced the lateral deflection in the bottom flange by 89%. The system decreased the stresses in the bridge girder and the top portion of the vehicle by 82% and 25%, respectively. The results reveal the capability of the proposed sacrificial system as an effective mitigation system.

Vibration control of high-rise buildings for wind: a robust passive and active tuned mass damper

Aly Mousaad Aly 국제구조공학회 2014 Smart Structures and Systems, An International Jou Vol.13 No.3

Tuned mass dampers (TMDs) have been installed in many high-rise buildings, to improve their resiliency under dynamic loads. However, high-rise buildings may experience natural frequency changes under ambient temperature fluctuations, extreme wind loads and relative humidity variations. This makes the design of a TMD challenging and may lead to a detuned scenario, which can reduce significantly the performance. To alleviate this problem, the current paper presents a proposed approach for the design of a robust and efficient TMD. The approach accounts for the uncertain natural frequency, the optimization objective and the input excitation. The study shows that robust design parameters can be different from the optimal parameters. Nevertheless, predetermined optimal parameters are useful to attain design robustness. A case study of a high-rise building is executed. The TMD designed with the proposed approach showed its robustness and effectiveness in reducing the responses of high-rise buildings under multidirectional wind. The case study represents an engineered design that is instructive. The results show that shear buildings may be controlled with less effort than cantilever buildings. Structural control performance in high-rise buildings may depend on the shape of the building, hence the flow patterns, as well as the wind direction angle. To further increase the performance of the robust TMD in one lateral direction, active control using LQG and fuzzy logic controllers was carried out. The performance of the controllers is remarkable in enhancing the response reduction. In addition, the fuzzy logic controller may be more robust than the LQG controller.

Pathogenicity of Bacillus Strains to Cotton Seedlings and Their Effects on Some Biochemical Components of the Infected Seedlings

Aly A. Aly,Omima M. El-Mahdy,Marian M. Habeb,Abeer Elhakem,Amal A. Asran,Maryan M. Youssef,Heba I. Mohamed,Rania S. Hanafy 한국식물병리학회 2022 Plant Pathology Journal Vol.38 No.2

Pathogenicity of eight Bacillus strains to seedlings of four cotton cultivars was evaluated under greenhouse conditions. Each of the tested cultivars was individually treated with powdered inoculum of each bacterial strain. Untreated seeds were planted as control treatments in autoclaved soil. Effects of the tested strains on levels and activities of some biochemical components of the infected seedlings were also assayed. The biochemical components included total soluble sugars, total soluble proteins, total free amino acids, peroxidase, polyphenol oxidase, phenols, and lipid peroxidation. ANOVA showed that Bacillus strain (B) was a very highly significant source of variation in damping-off and dry weight. Cotton cultivar (V) was a nonsignificant source of variation in damping-off while it was a significant source of variation in dry weight. B × V interaction was a significant source of variation in damping- off and a nonsignificant source of variation in dry weight. Bacillus strain was the most important source of variation as it accounted for 59.36 and 64.99% of the explained (model) variation in damping-off and dry weight, respectively. The lack of significant correlation between levels and activities of the assayed biochemical components and incidence of damping-off clearly demonstrated that these biochemical components were not involved in the pathogenicity of the tested strains. Therefore, it was hypothesized that the pathogenicity of the tested strains could be due to the effect of cell wall degrading enzymes of pathogenic toxins. Based on the results of the present study, Bacillus strains should be considered in studying the etiology of cotton seedling damping-off.