조경용 탄성포장의 재료 배합비에 따른 결합력과 탄성분석

박원규,Park, Won-Kyu 한국조경학회 2010 韓國造景學會誌 Vol.38 No.5

탄성포장은 보행자의 만족감이 매우 높아 수요가 지속적으로 증가할 것으로 예상되나, 탄성포장의 재료 배합기준 즉, 합성고무 칩(EPDM chip)과 폴리우레탄 바인더의 적정배합기준이 미비하여 시공 시 많은 시행착오를 겪고 있는 실정이다. 따라서, 본 연구는 조경용 탄성포장의 폴리우레탄 바인더 배합비에 따른 결합력과 반발탄성의 변화를 실험을 통해 분석하고, 이를 바탕으로 적정한 재료배합 비율을 제시하고자 하였으며, 실험결과는 다음과 같다. 인장실험에서는 시료 B와 시료 C가 바인더 배합비율과 인장강도 간에 강한 양의 상관관계가 있는 것으로 나타나, 배합비율이 증가하면 인장강도가 증가한다는 것을 알 수 있다. 경도실험에서는 시료 A,시료 B,시료 C모두 바인더 배합비율과 경도 간에 통계적으로 상관관계가 없는 것으로 나타나, 탄성포장재의 경도는 바인더의 배합비율에 따라 달라지지는 않는 것으로 판단된다. 반발탄성실험에서는 시료 A와 시료 B가 배합비율과 반발탄성 간에 강한 음의 상관관계가 있는 것으로 나타나, 배합비율이 증가하면 반발탄성이 낮아진다는 것을 알 수 있다. 실험결과를 바탕으로 적정배합비율을 분석해 보면 인장강도의 경우, 인장강도의 증가가 둔화되거나 오히려 감소하는 배합비율 포인트는 20%이며, 반발탄성의 경우, 반발탄성이 급격하게 감소하는 배합비율 포인트는 22%이다. 따라서 두가지 요인을 감안할 때, 적정 배합비는 20~22% 사이로 판단된다. 본 연구의 결과는 조경용 탄성포장 시공 시 결합력과 탄성을 제고할 수 있는 재료배합의 지침을 제공할 수 있을 것으로 기대된다. The demand for elastic pavement, providing comfort for pedestrians is expected to increase continuously but the lack of a standard for materials mixing ratio, that is, the optimal mixing ratio between ERDM chip and polyurethane binder, is still in a trial and error stage. This study aimed at recommending an optimal mixing ratio for elastic landscape pavement through a coherence and resilience test depending on ratio. The test result is outlined as follows. In a tensile strength test, samples B and C indicated a close positive relationship between the binder mixing ratio and tensile strength, indicating that the higher the mixing ratio the higher the tensile strength. In a hardness test, none of samples A, B or C indicated a statistical interrelationship between the binder mixing ratio and hardness. That is, the hardness of the elastic pavement material remained unchanged, irrespective of the binder mixing ratio. In a resilience lest, Samples A and B indicated a close negative interrelation between mixing ratio and resilience, indicating that the higher the mixing ratio, the lower the resilience. Upon analyzing the optimal mixing ratio based on test results, an increase in tensile strength began to slow at a 20% mixing ratio, while resilience began to reduce rapidly at 22%, Thus the optimal range for a mixing ration appeared to be 20~22%. The outcome of this study could to provide guidance for improving the elasticity and stability of elastic pavement.

창경궁 통명전 목부재의 연륜연대 측정 -방에서 마루로 변형된 시기규명을 중심으로-

박원규,손병화,한상효,Park, Won-Kyu,Son, Byung-Wha,Han, Sang-Hyo 한국건축역사학회 2003 건축역사연구 Vol.12 No.3

Tree-ring chronologies can be used to date historical buildings by matching them with the chronologies of living trees or previously dated samples. Tree-ring dating gives a calendar year to each tree ring and produces the felling dates of logs or woods which had been used for buildings. In Korea, several chronologies of Japanese red pine(Pinus densiflora Sieb. et Zucc., 'sonamu' in Korean), a major species for the wooden building materials, have been developed and used for dating historical buildings. In this study, Tongmyungjeon Hall of Changkyung Palace in Seoul was dated by tree rings. The present Tongmyungjeon Hall was known to be reconstructed in A.D. 1834 after burned-out in A.D. 1790. We sampled total of 122 wood samples which were replaced during the repair process in 2002-2003. Felling dates of the samples were determined by the dendrochronological crossdating method. Crossdating method employs graphic comparison of the master patterns (ring-width chronologies of known dates) with those of the sample chronologies of unknown dates. Tree-ring dates confirmed that the reconstruction of 1834 utilized second-handed timbers as well as fresh-cut ones. The felling dates of wooden floor frames were mostly A.D. 1913, indicating the 'Ondol' floors were changed to the wooden floors around 1914 when the Japanese rulers brutally destroyed the royal Korean Palaces and transformed palace buildings to their offices or exhibition halls after occupying Korea in 1910. This study proved that tree-ring dating was a useful and accurate method to identify the critical dates for the history of Korean traditional buildings.

연마방법에 따른 금속의 활택도에 관한 연구 - Atomic Force Microscope를 이용한 -

박원규,우이형,최부병,이성복,Park Won-Kyu,Woo Yi-Hyung,Choi Boo-Byung,Lee Sung-Bok 대한치과보철학회 2003 대한치과보철학회지 Vol.41 No.1

The surface of metals should be as smooth as possible for optimum comfort, oral hygiene, low plaque retention, and resistance to corrosion. In this study five specimens of each precious metal(type III gold alloy, ceramic gold alloy, and Ag-Pd alloy) were divided into five groups according to finishing and polishing procedures : group 1(sandblaster), group 2(group 1+stone), group 3(group 2+brown rubber), group 4(group 3+green rubber), and group 5(group 4+rouge). Six specimens of each non-precious metal(Co-Cr alloy, Ni-Cr alloy, and Co-Cr-Ti alloy) were divided into six groups: group 1(sandblaster), group 2(group 1+hard stone), group 3(group 2+electrolytic polisher), group 4(group 3+brown hard rubber point), group 5(group 4+green hard rubber point), and group 6(group 5+rouge). Considering factors affecting the rate of abrasion, the same dentist applied each finishing and polishing procedure. In addition, the surface roughness of enamel, resin, and porcelain was evaluated. The effect of finishing and polishing procedures on surface roughness of precious and non-precious metals, enamel, resin, and porcelain was evaluated by means of Atomic Force Microscope(AutoProbe CP. Park Scientific Instruments, U.S.A.) that can image the three dimensional surface profile and measure average surface roughness values of each sample at the same time. The obtained results were as follows : 1. According to finishing and polishing procedures, the surface roughness of type III gold alloy, ceramic gold alloy, and Ag-Pd alloy was decreased in the order of group 1, 2, 3, 4, and 5 (P<0.01). 2. According to finishing and polishing procedures. the surface roughness of Co-Cr alloy, Ni-Cr alloy, and Co-Cr-Ti alloy was decreased in the order of group 1, 2, 3, 4, 5, and 6 (p<0.01). 3. There was not statistically significant difference in the surface roughness among three metals of precious metals in group 1 but was significant difference in group 2, 3, 4, and 5 (P<0.05). 4. There was not statistically significant difference in the surface roughness among three metals of non-precious metals in all groups. 5. When the surface roughness of the smoothest surface of each metal, enamel. porcelain, and resin was compared, porcelain was the smoothest and the surface roughness was decreased in the order of Ni-Cr alloy. Co-Cr alloy. Co-Cr-Ti alloy, resin. Ag-Pd alloy, ceramic gold alloy type III gold alloy, and enamel (P<0.01). The results of this study indicate that the finishing and polishing procedures should be carried out in a logical, systematic sequence of steps and the harder non-precious metals may be less resistance to abrasion than are the softer precious metals.

목재 조경시설물의 목재 종류별 하자분석 - 휴게시설물 목재기둥의 균열하자를 중심으로-

박원규,신훈,Park, Won-Kyu,Shin, Hoon 한국조경학회 2012 韓國造景學會誌 Vol.40 No.3

국민 생활수준의 향상으로 안전과 환경에 대한 인식이 고조됨에 따라 조경시설물에 환경 재료의 하나인 목재가 널리 이용되고 있으나, 미송을 사용한 목재 조경시설물은 틀어짐, 균열 등의 하자가 많이 발생하고 있어, 수입목재인 활엽수재(hardwood)를 사용하는 사례가 늘고 있다. 그러나 수입 목재는 고가이며, 실제 하자 발생이 미송에 비해 얼마나 저감되는지에 대한 정보나 실태조사 없이 사용되고 있어, 시공자에게 목재 수종별 특성과 품질 하자 발생 정도에 대한 정보가 매우 필요한 실정이다. 따라서 본 연구는 목재 조경시설물에 사용되는 미송, 부켈라, 니아토, 말라스 목재 4종류를 대상으로 목재의 균열 하자현황을 조사 분석하여 시공자로 하여금 적절하게 목재를 사용할 수 있는 기초자료를 제공하는데 목적을 두었다. 본 연구의 주요 결과를 요약하면 다음과 같다. 첫째, 휴게시설물 목재기둥의 목재 표면적 당 균열 하자는 미송 1.90개소/$m^2$, 말라스 0.83개소/$m^2$, 부켈라 0.14개소/$m^2$, 니아토 0.04개소/$m^2$로 조사되어 니아토가 가장 적은 것으로 나타났다. 둘째, 목재 종류별 강도와 하자율 비교를 보면 목재의 강도는 말라스가 우수하였으나, 하자율은 니아토가 더 적게 발생한 것으로 보아 목재 강도가 높은 것이 하자가 적게 발생하는 것은 아니라는 것을 알 수 있었다. 셋째, 목재 종류별 단가와 하자율 비교를 보면 미송이 가장 저렴하고 부켈라가 가장 고가로 조사되었으며, 하자처리 비용을 감안할 때 하자가 적게 발생하는 니아토를 사용하는 것이 경제적인 측면에서 유리하다고 판단된다. 본 연구는 목재 조경시설물 설치 시 시공자로 하여금 적절한 목재를 선택할 수 있는 기초자료를 제공한다는데 그 의의가 있으며, 조경시설물의 품질 향상과 하자 저감에 기여할 수 있을 것이다. Improvements in the quality of life have resulted in a heightened awareness of safety and the environment. As a result, timber as an environmentally friendly material, is used for landscape facilities and a wide range of purposes. But there are a large number of defects since there are twists and cracks that can be found in wooden landscape facilities. This has led to the use of imported hardwood instead of the Western Hemlock which has been in widespread use. Hardwood is expensive. However, it is being used without any information or research on how much it reduces the actual defects. Construction contractors are in great need of information on the characteristics and defect rates of different types of timber. This study investigated and analyzed the cracks in four types of timber - namely the Western Hemlock, Burckella, Nyatoh and Malas - in order to provide basic information to construction contractor for them to be able to select and use the appropriate type of timber. The main results of this study are as follows. First, the Western Hemlock had 1.90 $cracks/m^2$, Malas had 0.83 $cracks/m^2$, Burckella had 0.14 $cracks/m^2$, and the Nyatoh had the least number of surface defects at 0.04 $cracks/m^2$. Second, while Malas has the highest degree of strength timber, Nyatoh had the smallest defect rate. This showed that having high timber strength does not necessarily mean it has less defects. Third, the Western Hemlock was the least expensive and Burckella was the most expensive. However, considering the cost of repairing defects, it would be economically advantageous to use Burckella and Nyatoh which have low defect rates. This study aimed to provide basic information to landscape construction contractors for them to be able to select and use the appropriate type of timber when constructing wooden outdoor rest furniture. The results are expected to contribute to quality enhancements and defect reduction in landscape facilities.

우리나라 건축물에 사용된 목재 수종의 변천

박원규,이광희,Park, Won-Kyu,Lee, Kwang-Hee 한국건축역사학회 2007 건축역사연구 Vol.16 No.1

We investigated the changes in the species of the woods used for Korean ancient and historic architectures, which include prehistoric excavated relics and existing wooden buildings in South Korea. The species data were collected from various sources such as excavation and repair reports, journal papers, and a few unpublished documents. We divided the building Periods as Paleolithic, Neolitic, Bronze Ages, Iron Age/Three Kingdoms, Koryo, Joseon (early, middle, late) and modem periods. In prehistoric periods, hardwoods were major species. Oak (Quercus spp.) woods dominated (94 percent in average); the others (5%) were Juglans mandshurica, Platycarya strobilacea, Castanea crenata, and few softwoods(1%). During Iron Age and Three Kingdom periods, oaks remained as a major species (57%) and others Platycarya strobilacea(21%), Castanea crenata(13%), and Pinus spp. (6%). The oak woods decreased in Koryo period and they occupied only 1.1%. Instead of oaks, pine (Pinus spp., 71%) and Zelkova serrata (22%) dominated in Koryo. In early and middle Joseon periods, pine woods (73%) remain as a major species and the others were oaks (14%) and Zelkova serrata (9%). As late Joseon came, the pine woods occupied more than 88%. In the late 19th and early 20th centuries, a few boreal species such as larch (Larix spp.) and spruce (Picea spp.), which grow in cold area, were found. We believe they were transported from northern Korea. The existing buildings in Korea are mainly from Joseon period and a few from late Koryo periods. During these periods, pine woods were used for most buildings. For such reason, pine woods were known as 'representative materials for historic buildings'. but earlier times, broad-leaved trees, i.e., oak and Zelkova woods were major materials. The changes in building materials resulted from both climate and human impacts. The dry climate and disturbed forests induce more pines in the mountains. We also compared the wood qualities of the species and found that Zelkova woods were superior ones and deserved more planting for future demands in the repair for historic buildings.

洛東江 流城의 水質에 關한 硏究 (I)

박원규,박영규,서종덕,Won Kyu Park,Yung Kyu Park,Jong Duck Suh 대한화학회 1969 대한화학회지 Vol.13 No.4

The results of water analysis for 10 stations in the main Naktong and 11 stations in the tributaries from March to December 1968 are as follows: The water quality of the Naktong River Basin is generally the frist class of water, especially the tributaries, Hwang river, Nam river, Milyang river, Naesongchun, Hoechun, Wichun and Panbyunchun were dissolved in less than 100 mg/l as the amount of the total ion of the main component. In comparison with river discharge, the amount of the total ion of the main component is decreased in June and July, because of the river discharge is increased in those periods. According to the measurement of the conductivity and the hardness, the better water quality is distinguished by the following order: lower part of river (Namji), middle part of river (Waegwan), upper part of river (Yean). The conductivity of Kumho river, Tongchon is higher than the middle part of the main river and Nam river, Chongam is smaller than lower part of the main rivller. The variation of the amount of the total ion of main component in the basin is mainly effected by $HCO_3^-, SO_4^{-2}, Cl^-, Ca^{+2}$. The relationship between $[K^+]\;and\;[C^l-]\;and\;[Na^+]\;and\;[Cl^-]\;are\;[K^+]=0.04\;[Cl^-]+1.7\;mg/l,\;[Na^+]=0.06\;[Cl^-]$ mg/l .The main river was much contaminated by Kumho river and C.O.D. at Gang-chung, Kumho river in June was recorder over the standard about 7 times.

아미드옥심화 PAN 나노섬유 웹의 중금속 흡착 특성

박원규,장미화,양혜연,최창남,Park, Won-Kyu,Jang, Mi-Hwa,Yang, Hye-Youn,Choi, Chang-Nam 한국섬유공학회 2007 한국섬유공학회지 Vol.44 No.6

In order to prepare the heavy metal adsorbent, PAN nano fiber web was prepared by electro spinning and subsequently amidoximated with hydroxyl amine. The diameter of fiber depended on the polymer concentration and the applied voltage. The average diameter increased with an increase of the polymer concentration and decreased with the applied voltage. Both the prepared nano fiber web and PAN fiber for weaving were amidoximated by the reaction of PAN with hydroxylamine. The formation of amidoxime groups was identified by FT-IR spectra and elemental analyses. The degree of amidoximation of PAN nano fiber was increased with increasing temperature. Amidoximated PAN nano fiber web had an excellent adsorption capacity for heavy metal ions, especially $Cu^{+2}$, compared with the amidoximated PAN fiber for weaving due to the relatively large specific surface area.

공동주택단지 외부공간의 친환경 수준에 따른 주민의 거주만족도와 친환경 의식 비교 연구 - 광주광역시 아파트 단지를 대상으로 -

박원규,임선화,Park, Won-Kyu,Im, Sun-Hwa 한국주거학회 2009 한국주거학회 논문집 Vol.20 No.6

This study focused on the analysis of residential satisfaction and environment awareness depending on the environment-friendly level on the outdoor space of the housing complexes. The purpose of this study is to present basic materials of the environment-friendly outdoor space planning of housing complexes. The major findings of the study are as follows. First, the results of the comparative analysis of the satisfaction of the outdoor space of apartment complexes show that the complexes with the most application of environment-friendly elements had higher residential satisfaction. But there was no meaningful statistical difference between the complexes with the higher level of application of the environment-friendly elements and the complexes with medium level of application. Secondly, according to a comparative analysis, the overall residential satisfaction of the apartment complexes was the same as the residential satisfaction of the outdoor space. Thirdly, the results of the correlative analysis of residential satisfaction and environmental awareness showed that the satisfaction of the apartment complexes decreases as the awareness of the environment-friendly apartment complex increases. The results of this study can be used as basic materials for environment-friendly outdoor space planning of apartment complexes.

독일의 대테러 법제·조직 및 그 시사점

박원규(Park, Won Kyu),박재풍(Park, Jae Poong) 경찰대학 경찰학연구편집위원회 2018 경찰학연구 Vol.18 No.1

최근 ISIL 등 국제테러단체에 의한 테러위협이 증대되고 있다. 국내의 경우 아직까지는 대규모 테러공격이 발생하지는 않았으나, 2010년 이후 현재까지 테러혐의자 71명이 강제퇴거조치를 당하는 등 국제테러단체에 의한 위협이 상존한다. 독일은 1972년 뮌헨 올림픽 인질사건, 2001년 9․11테러, 2011년 나치지하당 사건 등을 계기로 테러와 관련된 법적․조직적 대응책을 지속적으로 정비해 왔다. 2015년 이후에는 대규모 난민과 함께 입국한 ISIL 추종자에 의한 테러공격이 다수 발생하는 등 독일 내 테러에 대한 관심이 증대되고 있다. 2016년 12월에는 난민청년에 의한 베를린 트럭테러사건이 발생하기도 하였다. 독일은 법적인 측면에서는 대테러법, 대테러정보법, 연방범죄수사청법 등의 신설(혹은 개정)을 통해 효과적인 테러 대응을 위한 장치들을 마련하고 있으며, 조직적인 측면에서는 연방 및 주 범죄수사청 내에 테러정보, 수사 및 진압을 담당하는 조직을 강화하고, 대테러부대를 추가 신설하였다. 또한 테러 대응에 있어 유관기관 간 정보교류가 핵심적 요소라는 점을 인식, 합동대테러센터(GTAZ) 등 대등한 관계의 협력체를 구성하고 있다. 따라서 이 논문에서는 독일의 대테러 관련 법제 및 조직에 대해 살펴본 후 한국에의 시사점을 제시하고자 한다.

안성 석남사 영산전 목부재의 수종 분석

박원규 ( Won Kyu Park ),정현민 ( Hyun Min Jeong ),김상규 ( Sang Kyu Kim ) 한국목재공학회 2008 목재공학 Vol.36 No.1

안성 석남사 영산전에 쓰인 주요 목부재의 수종을 식별하기 위하여 기둥, 창방, 대들보, 서까래, 청판 등 총 95점에 대하여 조사하였다. 수종은 소나무류(경송류), 외래산 소나무류, 느티나무, 은행나무, 감나무속, 배나무속, 참나무속의 상수리나무류 등 7 수종이 식별되었다. 기둥에서는 소나무류(경송류) 8점, 느티나무 1점, 배나무속 1점이 확인되었다. 추녀에서는 은행나무 2점과 느티나무 2점, 대들보에서는 소나무 1점과 느티나무 1점이 나왔다. 주심도리는 2점 모두 상수리나무류이었고, 서까래에서는 은행나무 1점과 외래산 소나무류 1점을 제외하고는 나머지는 소나무류인 것으로 밝혀졌다. 적심목에서 느티나무 1점과 감나무속 1점이 나왔다. 다른 부재는 소나무류가 대부분이었다. 서까래에서 나온 외래산 소나무 1점은 해방 이후 영산전 수리 시 사용된 것으로 추정되었다. 소나무류 이외에 다양한 수종의 목재가 사용된 것은 사찰 인근에서 쉽게 구할 수 있는 수종들을 이용하였기 때문인 것으로 사료된다. The purpose of this study is to examine the species of wooden members used in the Youngsanjeon Hall of the Sucknamsa temple in Anseong, Korea. Ninety-five wood samples from pillars, head-penetrating ties, beams, corner rafter, rafter, floor board and other wood members were identified. Seven species identified were hard pine, exotic pine, Zelkova serrata, Ginkgo biloba, Diospyros, Quercus(Cerrus) and Pyrus spp. In the case of pillars, eight were hard pines and the others Zelkova and Pyrus. Species of angle rafter were Ginkgo biloba and Zelkova. and those of beams were one hard pine and one Zelkova. Two purlin samples were Quercus(Cerrus) and rafters were hard pines except one Ginkgo and one exotic pine. Roof-filling timbers were identified as Zelkova and Diospyros spp. The other samples of roof-filling timbers were all identified as hard pines. The use of Ginkgo and several hardwoods in addition to hard pines may indicate supply of local logs near the Sucknamsa temple.