http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
파랑하중을 받는 굴착치환 사석경사식 방파제의 침하량 산정과 설계 적용성에 관한 연구
안익성(Ahn, Ik-Seong),박상길(Park, Sang-Kil) 한국해안해양공학회 2008 한국해안해양공학회 논문집 Vol.20 No.4
파랑하중은 연약지반을 굴착 치환시킨 후에 축조된 사석경사식 방파제의 안정에 직접적인 영향을 주는 요소이다. 특히 일부 침하를 허용하는 굴착치환 사석경사 방파제에서 침하를 유발하는 주요인으로 지목되었으나, 설계 시 파랑하중에 의한 방파제의 침하에 대한 영향을 검토하여 반영하는 사례가 전무한 상태이다. 따라서 본 연구에서는 파랑하중에 의한 방파제 침하의 영향을 설계에 직접 반영할 수 있도록 수치모형실험을 실시하여 방파제 침하량을 계산한 후 현장계측자료와 비교하였다. 계산값과 실측값은 양호한 일치를 보이는 것으로 나타났다. Wave force is an important factor which gives a direct affect to stability of the rubble mound breakwater. Particularly wave force has been considered as the main cause of displacement for replaced rubble mound breakwater which permits a little displacement to some degree. But the effect on displacement by wave force has not been considered and reflected in design. Therefore in this study, we compared numerical analysis displacement with field measured displacement so that the effect of wave force on displacement can be reflected in design. Result of the numerical analysis displacement was well consistent with field measured displacement data.
계산화학적 방법을 통한 β-D-glucopyranose 구조 연구
양지현,김진아,이상민,안익성,민병진,Yang, Ji-Hyun,Kim, Jinah,Lee, Sangmin,Ahn, Ik-Sung,Mhin, ByungJin 대한화학회 2013 대한화학회지 Vol.57 No.5
본 연구에서는 ${\beta}$-D-glucopyranose 분자의 hydroxymethyl group의 두 torsion angle의 변화에 따른 포텐셜 에너지의 변화를 진공 상태와 implicit water 상태에서 연구하였으며 이를 통해 Solvation Energy가 구조에 미치는 영향에 대해서 알아보았다. 계산에 사용한 프로그램은 AMBER package였으며, force field는 GLYCAM_06을 사용하였다. Solvation model은 Hawkins, Cramer, Truhlar 등이 제안한 generalized Born model을 사용하였다. 계산 결과, methyl hydroxyl group 내의 hydroxyl group이 고리구조의 hydroxyl group과 강한 수소결합이 가능한 영역에서 많은 변화가 일어났다. 이를 통해 solvation effect로 인해서 수소 결합의 중요성이 감소했다는 결론을 내렸다. In this study, we have investigated potential energy of ${\beta}$-D-glucopyranose in vacuum and implicit water condition. By Comparing two conditions we find that how solvation energy influence ${\beta}$-D-glucopyranose structure. We use AMBER package program and GLYCAM_06 force field. Solvation model was used for the generalized Born model with Hawkins, Cramer, Truhlar has been proposed. We conclude that difference of contour map of two conditions is caused by solvation effect by reducing hydrogen bonding interaction.
폴리머 바인더의 선처리를 통한 압축형 복합화약으로부터 octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine의 회수 공정 개발
김혜주,김동우,허유진,박세원,이창하,안익성,이근득,Kim, Hyejoo,Kim, DongWoo,Huh, Eugene,Park, Sewon,Lee, Chang-Ha,Ahn, Ik-Sung,Lee, Keun Deuk 한국군사과학기술학회 2020 한국군사과학기술학회지 Vol.23 No.5
Extraction and anti-solvent crystallization were proposed to recover octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) from pressed polymer bonded explosives(PBXs). DXC-57 and DXC-59, whose polymeric binders are Estane and HyTemp with dioctyl adipate plasticizer, respectively, were used as pressed PBX models. Estane of DXC-57 was removed by washing with tetrahydrofuran prior to extraction, which enabled the crystallization of HMX at a low degree of supersaturation, sufficient to obtain β-form HMX. Using dimethyl sulfoxide and ethanol as the extraction solvent and the anti-solvent for crystallization, respectively, HyTemp and dioctyl adipate in DXC-59 were separated from HMX. The purity of recovered β-form HMX was higher than 99 %.
결정화에 의한 4성분계 에너지 복합체 제조 및 열분해 특성
김병수 ( Byoung-soo Kim ),김재경 ( Jae-kyeong Kim ),안익성 ( Ik-sung Ahn ),김현수 ( Hyoun-soo Kim ),구기갑 ( Kee-kahb Koo ) 한국공업화학회 2019 공업화학 Vol.30 No.2
결정화/응집 공정을 이용하여 금속/금속산화물/분자화약/산화제로 구성된 구형 4성분계 복합체 3종을 제조하였다. 열중량 분석(TGA) 및 시차주사열량법(DSC)에 의한 열 특성 분석 결과 복합체를 이룬 분자화약의 분해 구간이 단축됨을 관찰하였고, ammonium perchlorate(AP) 분해 생성물인 HCl 및 ClO<sub>2</sub>에 의한 자가 촉매 반응에 의한 것으로 해석된다. 활성화 에너지 분석 결과 분자화약 분해 종료 구간에서 급격하게 활성화 에너지가 감소함을 확인할 수 있었으며, 이는 분자화약 분해 생성물 중 공통으로 발생하는 HNO<sub>2</sub>에 의한 것으로 판단된다. 본 연구에서 복합체 열분해 분석 결과로 부터 Distributed Activation Energy Model (DAEM)에 의해 모사된 활성화 에너지가 model-fitting 분석법인 Kissinger-Akahira-Sunose와 Flynn-Wall-Ozawa model에 의한 모사치보다 정확도가 대단히 우수함을 알 수 있었다. Three spherical quaternary composites composed of metal/metal oxide/high explosive/oxidizer were prepared by a crystallization/agglomeration process. From the characteristics of composites by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), the shortening of the decomposition zone of high explosives in the quaternary composite was observed, which may be attributed to the autocatalytic reaction caused by ClO<sub>2</sub> or HCl which are ammonium perchlorate (AP) degradation products. The activation energy analysis showed that the activation energy abruptly decreases at the end of the decomposition zone of high explosives, and it was considered to be caused by HNO<sub>2</sub> which is common in decomposition products of high explosives. The activation energy predicted from complex pyrolysis results by the distributed activation energy model (DAEM) showed much better in accuracy than those by model-fitting methods such as Kissinger-Akahira-Sunose and Flynn-Wall-Ozawa models.