http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전층 각막이식 후 경면현미경, 초음파 각막두께측정계 및 Orbscan을 이용한 중심 각막두께 측정치의 비교
김형석,김준헌,김효명,송종석,Hyoung-Seok Kim,Jun Heon Kim,Hyo Myong Kim,Jong-Suk Song 대한안과학회 2007 대한안과학회지 Vol.48 No.2
Purpose: To compare the accuracy and reproducibility of central corneal thickness measured by non-contact specular microscopy, ultrasound pachymetry, and Orbscan in the post-penetrating keratoplasty eyes. Methods: Central corneal thickness was prospectively measured in eyes that had recieved penetrating keratoplasty at least 1 month before. One experienced technician measured all eyes using three methods; non-contact specular microscopy (Topcon SP-2000P; Topcon Corporation, Tokyo, Japan), Orbscan IIz (Orbtek; Bausch & Lomb, Rochester, USA), and ultrasound pachymetry (AL-2000; Tomey, Erlangen, Germany). Three consecutive measurements were performed using each method and the mean values and coefficient of variation were compared. Results: The mean values of central corneal thickness were 550.7±63.3 ?m with specular microscopy, 548.2±72.5 ?m with ultrasound pachymetry, and 472.5±151.7 ?m with Orbscan. There was no significant difference between the measurements obtained by specular microscopy and ultrasound pachymetry (p=0.53), and both methods showed high reproducibility. The corneal thickness measured by Orbscan was remarkably variable and in some patients, Orbscan was unable to measure corneal thickness. Conclusions: Non-contact specular microscopy appears to be an effective technique, potentially replacing ultrasound pachymetry for measuring central corneal thickness in the post-penetrating keratoplasty eyes.
PFC 부스트 컨버터의 역률 및 고조파 왜율 개선을 위한 이득 조정 기법
김형석(Hyoung-Suk Kim),성현욱(Hyun-Wook Seong),이재범(Jae-Bum Lee),문건우(Gun-Woo Moon),윤명중(Myung-Joong Youn) 전력전자학회 2011 전력전자학술대회 논문집 Vol.2011 No.7
본 논문에서는 PFC 부스트 컨버터의 역률 및 고조파 왜율 개선을 위한 전류 제어기 이득 조정 기법을 제안한다. PFC단은 입력 전압의 변화에 따라 인덕터 전류의 크기가 달라져 부스트 인덕터의 인덕턴스가 변화하게 되어 전류 루프의 주파수 특성이 변화하게 된다. 이러한 현상으로 인한 전류 루프의 이득 변화를 분석하였다. 이를 기반으로 입력 전압에 따라 전류 제어기의 이득을 조정해 줌으로써, 충분한 위상마진을 확보함과 동시에 PF와 THD 성능을 개선한다. TI사의 TMS320F28027 MCU를 이용한 실험을 통해 제안된 기법의 유용성을 검증한다.
고전압 배터리 스택을 위한 플라이백 방식의 새로운 배터리 이퀄라이저
김형석(Hyoung-Suk Kim),박기범(Ki-Bum Park),박상현(Sang-Hyun Park),문건우(Gun-Woo Moon),윤명중(Myung-Joong Youn) 전력전자학회 2008 전력전자학술대회 논문집 Vol.- No.-
본 논문에서는 전류 불연속 모드(DCM)로 동작하는 두 개의 스위치를 가지는 플라이백 컨버터(Two Switch Flyback)를 응용한 배터리 이퀄라이저(Battery Equalizer)를 제안한다. 제안된 배터리 이퀄라이저는 스위치와 다이오드를 공통으로 사용해 추가되는 능동 소자의 수를 최소화 한다. 또한 스위치 양단의 전압 스트레스를 배터리 스택(stack) 전압으로 제한 시켜 낮은 정격 전압을 가지는 스위치를 사용 가능하게 하여 가격을 줄이고 효율을 높인다. 이론적 분석과 실험을 통해 제안한 배터리 이퀄라이저의 성능을 검증한다.